I reduced the parameter space a little bit and I think the problem is somewhere in the framework. What I did is first to make a short program which accesses the ODB and I was able to access the Settings record. Everything seems to work fine, if parts or all of the record is missing then it is created automatically, etc.

Then I reduced my frontend to essentially a few lines in the frontend_init() which are identical to what I did in the small test program. Still when running the frontend it doesn't work and db_create_record() returns the error DB_OPEN_RECORD. I have tried something crazy, i.e. to disconnect the experiment and then reconnect in the frontend_init() and I was able to write the Settings record in the ODB! I have checked in mfe.c and odb.c and I think when my frontend_init() gets called, the record is already open!

Does anybody skilled with Midas know what I can do to solve or investigate this problem further?

This is the small program that can successfully access the ODB and create the Settings record.

This is the frontend_init() part (there is nothing left in the frontend anyway). This is exactly the same code like the previous one, but it won't work! So I concluded that the problem is already present when frontend_init() gets call in mfe.c

Hello,

Hi,

I am having some trouble with the data in my Midas bank. I am filling a midas
bank in my frontend (one of several in my system), and this bank is then being
added to the overall event by the event builder.

I check the data as it enters the bank, and also check again after I close the
bank in my frontend (using pdata's original value), and in both cases my data is
as I expect.

However, when I view the data in the .mid file (using mdump), there is a
problem. The correct number of words are there, and the values are correct up
until the 148th word. However, all subsequent words are 0.

I have also noticed that if I change my word size from 32bit (DWORD) to 16bit
(WORD), I observe the same behaviour except that now the first 296 words are
correct and all others are zero.

Note that other frontends in the system are not suffering this issue.

Does anyone have any ideas about how to solve this problem?

> Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace TRIGGER_ALL with 0 in the 
> frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to get around this?

Ok, then it's clear. The trigger mask inside the EQUIPMENT_INFO is defined as 16-bit unsigned int (WORD). So the -1 gets expanded into a 64-bit signed int, then the compiler complains about truncating this to 16-bit. 

Just try instead TRIGGER_ALL to write

(WORD)(-1)

or even

0xFFFF

that should do the job. Basically you want all 16 bits to be "1" if yo do not use this feature.

Best regards,
Stefan

> > I am having some trouble creating a frontend that interacts with some libraries that use C++11. 
> > 
> > The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
> > causes an error in the equipment description in the frontend code.
> > 
> > The error I get is:
> > 
> > frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
> > }
> > 
> > This corresponds to the following in the MIDAS frontend code.
> > 
> > EQUIPMENT equipment[] = { 
> >   {
> >    "MWPC",                           /* equipment name */
> >    {1, TRIGGER_ALL,                  /* event ID, trigger mask */
> >      "BUF2",                        /* event buffer */
> >      EQ_POLLED | EQ_EB,              /* equipment type */
> >      LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
> >      "MIDAS",                        /* format */
> >      TRUE,                           /* enabled */
> >      RO_RUNNING,                     /* read only when running */
> >      1,                              /* poll for 1ms */
> >      0,                              /* stop run after this event limit */
> >      0,                              /* number of sub events */
> >      0,                              /* don't log history */
> >      "", "", "",},
> >     read_trigger_event,              /* readout routine */
> >   },
> > 
> >    {""}
> > };  <- this is line 149
> > #ifdef __cplusplus
> > }
> > #endif
> > 
> > Do you know a way to make this compatible with C++11?
> > 
> > Thanks!
> 
> Is this maybe related to the LAM_SOURCE(0, 0xFFFFFFFF) where 0xFFFFFFFF is -1. I guess you are not using CAMAC, so just replace the 
> LAM_SOURCE(...) with zero and try again.
> 
> /Stefan

Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace TRIGGER_ALL with 0 in the 
frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to get around this?

To answer the other questions, we are running on SLF6. I am building a frontend for a MWPC to read data from CAEN TDCs.

> I am having some trouble creating a frontend that interacts with some libraries that use C++11. 
> 
> The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
> causes an error in the equipment description in the frontend code.
> 
> The error I get is:
> 
> frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
> }
> 
> This corresponds to the following in the MIDAS frontend code.
> 
> EQUIPMENT equipment[] = { 
>   {
>    "MWPC",                           /* equipment name */
>    {1, TRIGGER_ALL,                  /* event ID, trigger mask */
>      "BUF2",                        /* event buffer */
>      EQ_POLLED | EQ_EB,              /* equipment type */
>      LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
>      "MIDAS",                        /* format */
>      TRUE,                           /* enabled */
>      RO_RUNNING,                     /* read only when running */
>      1,                              /* poll for 1ms */
>      0,                              /* stop run after this event limit */
>      0,                              /* number of sub events */
>      0,                              /* don't log history */
>      "", "", "",},
>     read_trigger_event,              /* readout routine */
>   },
> 
>    {""}
> };  <- this is line 149
> #ifdef __cplusplus
> }
> #endif
> 
> Do you know a way to make this compatible with C++11?
> 
> Thanks!

Is this maybe related to the LAM_SOURCE(0, 0xFFFFFFFF) where 0xFFFFFFFF is -1. I guess you are not using CAMAC, so just replace the 
LAM_SOURCE(...) with zero and try again.

/Stefan

I am having some trouble creating a frontend that interacts with some libraries that use C++11. 

The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
causes an error in the equipment description in the frontend code.

The error I get is:

frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
}

This corresponds to the following in the MIDAS frontend code.

EQUIPMENT equipment[] = { 
  {
   "MWPC",                           /* equipment name */
   {1, TRIGGER_ALL,                  /* event ID, trigger mask */
     "BUF2",                        /* event buffer */
     EQ_POLLED | EQ_EB,              /* equipment type */
     LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
     "MIDAS",                        /* format */
     TRUE,                           /* enabled */
     RO_RUNNING,                     /* read only when running */
     1,                              /* poll for 1ms */
     0,                              /* stop run after this event limit */
     0,                              /* number of sub events */
     0,                              /* don't log history */
     "", "", "",},
    read_trigger_event,              /* readout routine */
  },

   {""}
};  <- this is line 149
#ifdef __cplusplus
}
#endif

Do you know a way to make this compatible with C++11?

Thanks!

Hi Pierre,

Thanks for your instructions. Before I run the wavedump software, I need to load a driver file for A2818, thus I think I've got this interface of A2818.

I would be grateful to have a look at the frontend example used for v1720 (closer to v1721 I suppose), would you be so kind to offer me the Makefile as well? I
really want to have a compilable/executable DAQ frontend for vme modules, and know better how to link to CAEN library in the Makefile.

About hardware currently used in the vme crate(A2818), there is a VME controller(V2718, CONET VME Bridge), and a FADC(VX1721 waveform digitizer). I'm now preparing
this DAQ system to compare relative quantum efficiency, timing resolution, 1 pe distribution of photomultipliers, also measure decay time of cosmic muons, and
electron spectrum. Humbly, I want to know your opinion on whether I need additional hardware to finish these experiments.

Thanks,
Li

> Hi Li,
> 
> You mention that you've got the wavedump working. It suggests that you have a A3818 
> interface, can you confirm that?
> 
> If so, you can make a Midas frontend using the CAEN libraries to access your VX1721. I can provide you with a frontend example used for the V1720 or V1740. The 
> modifications for the VX1721 shouldn't be too hard as most of the CAEN digitizers 
> are fortunately based on a similar configuration mechanism.
> If you have a Midas CAMAC frontend, the trick would be to replace the CAMAC calls by 
> the appropriate CAENComm_xxx() for the equivalent functionality.
> 
> Can you remind me what hardware do you have in your lab for acquisition?
> CAMAC controller, VME controller etc.
> 
> Cheers, PAA
> 
> > Dear guys,
> > 
> > I’m Zhi Li from China, and I’m now working on my graduation project, which now
> > basically gets stuck in the part of preparing the frontend for my FADC (CAEN
> > VX1721) using Midas.
> > 
> > Now the current set-up includes a VME crate, a CAEN v2718 (Optical Bridge and
> > Controller) and a CAEN VX1721(8ch 8bit 500MS/s Waveform digitizer). The hardware
> > set-up has been finished and I could capture the analog waveform using CAEN
> > software(wavedump). 
> > 
> > Could anyone please tell me what are the basic things to do for using MIDAS?
> > I’ve installed MIDAS in PC and it works well for CAMAC, but do I need any extra
> > hardware module on using VME crate? Also, how to download
> > Universe-II VME driver?
> > 
> > Thanks,
> > Li

> > > odbedit can now save ODB in JSON-formatted files.
> encode NaN, Inf and -Inf as JSON string values "NaN", "Infinity" and "-Infinity". (Corresponding to the respective Javascript values).

A new standard just came out - Oasis OData JSON format 4.0 - 
http://docs.oasis-open.org/odata/odata-json-format/v4.0/os/odata-json-format-v4.0-os.html

Section 7.1 reads:

> Values of types [...] Edm.Single, Edm.Double, and Edm.Decimal are represented as JSON numbers, except for NaN, INF, and –INF which are represented as strings.

This is consistent with what we do in MIDAS - encode special numbers as strings. For now I think we stay with Javascript-standard "Infinity", "-Infinity",
but if more standards start using "INF", "-INF", maybe we will switch. It is easy enough to support both encodings in the JSON parser and in the ODB decoder.

https://xkcd.com/927/
K.O.

Hi Li,

You mention that you've got the wavedump working. It suggests that you have a A3818 
interface, can you confirm that?

If so, you can make a Midas frontend using the CAEN libraries to access your VX1721. I can provide you with a frontend example used for the V1720 or V1740. The 
modifications for the VX1721 shouldn't be too hard as most of the CAEN digitizers 
are fortunately based on a similar configuration mechanism.
If you have a Midas CAMAC frontend, the trick would be to replace the CAMAC calls by 
the appropriate CAENComm_xxx() for the equivalent functionality.

Can you remind me what hardware do you have in your lab for acquisition?
CAMAC controller, VME controller etc.

Cheers, PAA

> Dear guys,
> 
> I’m Zhi Li from China, and I’m now working on my graduation project, which now
> basically gets stuck in the part of preparing the frontend for my FADC (CAEN
> VX1721) using Midas.
> 
> Now the current set-up includes a VME crate, a CAEN v2718 (Optical Bridge and
> Controller) and a CAEN VX1721(8ch 8bit 500MS/s Waveform digitizer). The hardware
> set-up has been finished and I could capture the analog waveform using CAEN
> software(wavedump). 
> 
> Could anyone please tell me what are the basic things to do for using MIDAS?
> I’ve installed MIDAS in PC and it works well for CAMAC, but do I need any extra
> hardware module on using VME crate? Also, how to download
> Universe-II VME driver?
> 
> Thanks,
> Li

> The Windows executables are no longer included in the midas git repository. Old versions are still available in 
> the git repository - they got pulled in during conversion from svn.
> 
> One reason for removing them is that neither myself, nor Pierre, nor Stefan have ready access to a Windows 
> development environment and we cannot keep Windows binaries up to date. Theoretically we can setup a 
> Windows machine just for compiling MIDAS, but then there is a question of which Windows we should use and 
> how much priority we should put into it. I do not think there is any demand for MIDAS on Windows at TRIUMF.

I double checked and can confirm that the executables in GIT are very old. So I tried to compile the current version for Windows. I found that I had to change lots 
of places (basically all the new files written by KO) to make it work again, so it took me half a day, but now should be fine.

I'm not sure if it's a good idea to keep .exe files in GIT, maybe we should remove it some day, but for the moment I updated the executables to the current 
version. Feedback welcome.

/Stefan

Dear guys,

I’m Zhi Li from China, and I’m now working on my graduation project, which now
basically gets stuck in the part of preparing the frontend for my FADC (CAEN
VX1721) using Midas.

Now the current set-up includes a VME crate, a CAEN v2718 (Optical Bridge and
Controller) and a CAEN VX1721(8ch 8bit 500MS/s Waveform digitizer). The hardware
set-up has been finished and I could capture the analog waveform using CAEN
software(wavedump). 

Could anyone please tell me what are the basic things to do for using MIDAS?
I’ve installed MIDAS in PC and it works well for CAMAC, but do I need any extra
hardware module on using VME crate? Also, how to download
Universe-II VME driver?

Thanks,
Li

> I stumbled over a problem which I cannot pin point and would appreciate suggestions.
> 
> [nemu@lem00 2014]$ odbedit -e nemu
> odbedit: src/odb.c:753: db_update_open_record: Assertion `xkey->notify_count == pkey-
>notify_count' failed.
> Aborted

I think this is a real bug in MIDAS - I will have to take a look to figure out where this is coming from. At the 
least, if I cannot replace the assert with some corrective action, I may replace it with an error message.

I am glad you could recover by reloading odb.

K.O.

> In the old SVN midas world it was typically such that the Windows dll's and
> exe's were ready to be used when checking out.

The Windows executables are no longer included in the midas git repository. Old versions are still available in 
the git repository - they got pulled in during conversion from svn.

One reason for removing them is that neither myself, nor Pierre, nor Stefan have ready access to a Windows 
development environment and we cannot keep Windows binaries up to date. Theoretically we can setup a 
Windows machine just for compiling MIDAS, but then there is a question of which Windows we should use and 
how much priority we should put into it. I do not think there is any demand for MIDAS on Windows at TRIUMF.

(Personally, I think Windows is no longer a viable platform for any business use - with Microsoft focusing on 
"experiences", "tiles", touch screens, portable devices, and other gimmicks - rather than on providing a solid OS 
to get work done)

> I am not so sure this is the case
> for the current version, since when I use the packed dll's  and exe's (e.g.
> odbedit.exe) I get the warning that this is running midas 2.0.0 but the current
> version (on the linux server) is 2.1. What does this mean?

You can ignore this message. Stefan incremented the MIDAS version when we migrated to git, but
there are no changes to the MIDAS RPC mechanism and we are still fully compatible with old versions,
at least in the MIDAS RPC and in the mserver.

So tools like odbedit.exe should still work okey when connecting from Windows to MIDAS running on Linux or 
MacOS.

But old frontend programs may cause some trouble because the ODB layout changed somewhat with new things 
added to /eq/xxx/common. Simplest is to try, if it works, it works.

> 1) A little bug in the packed windows part, but up-to-date dll's and exe's?
> 2) The dll's and exe's are not bundled any more to up-to-date version?

Case (2) is the case. Personally I do not have any capability to build Windows binaries. Same for Pierre and I think 
for Stefan.

> If 2) is the case, I would like to get a hint how to build midas under Windows
> (Windows 7), since we still have some few Windows clients.  

I do not think pre-built executables will ever return - the new way of things is to "cut-and-paste" the "git clone" 
command from a web page, type "make", and be done with it. If your OS does not have "git", "make" & etc, you 
should switch to a real OS.

On the MIDAS software side, we have no problem with supporting Windows - same as on any other platform, 
please try to build and run it, report any problems, fixes, patches and improvements - we will commit them into 
the midas repository.

K.O.

The midas wiki at https://midas.triumf.ca was updated to mediawiki 1.22.4 - the latest production version. 
If you see any problems, please report them to this elog. K.O.

In the old SVN midas world it was typically such that the Windows dll's and
exe's were ready to be used when checking out. I am not so sure this is the case
for the current version, since when I use the packed dll's  and exe's (e.g.
odbedit.exe) I get the warning that this is running midas 2.0.0 but the current
version (on the linux server) is 2.1.

What does this mean?

1) A little bug in the packed windows part, but up-to-date dll's and exe's?
2) The dll's and exe's are not bundled any more to up-to-date version?

If 2) is the case, I would like to get a hint how to build midas under Windows
(Windows 7), since we still have some few Windows clients.  

16:07:06 [Logger,INFO] Program Logger on host lem00 started
[local:nemu:S]/>q
[nemu@lem00 2014]$ odbedit -e nemu
odbedit: src/odb.c:753: db_update_open_record: Assertion `xkey->notify_count == pkey->notify_count' failed.
Aborted

I put mhttpd.css and mhttpd.js into the ODB, so every experiment can change it. I put also Andreas' modifications of the CSS file for the runlog table and 
committed the changes.

/Stefan