Hi All,

I'm testing MIDAS SVN rev-4113 on Scientific Linux 5.1 (i386) and the Analyzer 
can't start as Daemon. What I mean "can't" is that it stops running 
immediately without leaving any error messages. However, it can run offline or 
without becoming a Daemon. I have tested with ROOT 5.14e/5.16/5.18 and 
the "Experiment" example coming with MIDAS and this problem always happens. 
Any ideas?

Best Regards,
Jimmy

>     /* start command */
>     if (*getparam("Start")) {
>        /* for NT: close reply socket before starting subprocess */
> -      redirect2("?cmd=programs");
> +      redirect2("/?cmd=programs");

The second version won't work if mhttpd is run under an Apache proxy. Assume the proxy redirects

http://proxy.ca/midas

to

http://daq.ca:8080

If you now do a redirect to "/?cmd=programs", you will end up at

http://proxy.ca/?cmd=programs

which is now what you want. I tried to put a "./?cmd=programs", and that bings you to

http://proxy.ca/midas/./?cmd=programs

which is correctly redirected to

http://daq.ca:8080/?cmd=programs

I tried with the windows version (ughhh) of Safari and it worked for me. So give it a try, the change is committed.

> ODB corruption happens here:
>  
>        sprintf(str, "/Programs/%s/Start command", name);
> -      db_get_value(hDB, 0, str, command, &size, TID_STRING, TRUE);
> +      db_get_value(hDB, 0, str, command, &size, TID_STRING, FALSE);
>        if (command[0]) {
>           ss_system(command);
> 
> It looks like db_get_value() would corrupt ODB if given funny "str". When Safari explodes,
> funny strings are generated.

What happes is an endless redirect from xxxx -> xxxx?cmd=Programs. So in the end you have

http://url.ca?cmd=programs?cmd=programs?cmd=programs?cmd=programs....

and in the end you get a stack overflow, which busts all.

> The simple fix is to replace "TRUE" with "FALSE", then at least db_get_value() does not try to make bogus 
> entries in ODB.

I changed both butting FALSE there and adding

   if (strchr(name, '?'))
      *strchr(name, '?') = 0;

which keeps the URL short.

So for me it looks fine at the moment, but I cannot guarantee that everything works, so keep an eye open on that.

> It looks like ODB function extract_key() will overwrite the array pointed to by "key_name" if given an odb 
> path with very long names (as seems to happen when redirection explodes in the Safari web browser, via 
> db_get_value(TRUE) via mhttpd "start program" button). All  callers of this function seem to provide 256 
> byte strings, so the problem would not show up in normal use - only when abnormal odb paths are being 
> parsed. Proposed solution is to add a "length" argument to this function. (Actually ODB path elements 
> should be restricted to NAME_LENGTH (32 bytes), right?). K.O.

This is fixed in svn revision 4129.

K.O.

Index: Makefile
===================================================================
--- Makefile    (revision 4129)
+++ Makefile    (working copy)
@@ -270,7 +270,7 @@

 OBJS =  $(LIB_DIR)/midas.o $(LIB_DIR)/system.o $(LIB_DIR)/mrpc.o \
        $(LIB_DIR)/odb.o $(LIB_DIR)/ybos.o $(LIB_DIR)/ftplib.o \
-       $(LIB_DIR)/mxml.o $(LIB_DIR)/cnaf_callback.o \
+       $(LIB_DIR)/mxml.o \
        $(LIB_DIR)/history.o $(LIB_DIR)/alarm.o $(LIB_DIR)/elog.o

 ifdef NEED_STRLCPY

--- Makefile    (revision 4129)
+++ Makefile    (working copy)
-       $(LIB_DIR)/mxml.o $(LIB_DIR)/cnaf_callback.o \
+       $(LIB_DIR)/mxml.o \
> i.e. remove cnaf_callback.o which causes the link errors.


Hi, Denis - I confirm that cnaf_callback.c is only used by MIDAS frontends that implement CAMAC
functions and that it should not required for building the MIDAS library. I am now looking at removing 
it from libmidas.

> I propose that libmidas.so is built by default, so when something breaks it won't go unnoticed

We have been through this before and decided that shared libraries are bad and we do not want to use 
them. The option for building libmidas.so was preserved, though.

Not to refight old wars, on reason against using shared libraries was version skew - one could never be 
sure what version of midas is being used - depending on the PATH, LD_LIBRARY_PATH, rpath settings, 
etc. There were other reasons, perhaps practical, perhaps with the mserver.

The main problem with "just build it", is that then the rest of midas will link against it bringing back all 
the problems we solved by going away from using shared libraries.

So back to your proposal about building libmidas.so - can you look and see if you can do the Python 
bindings with a statically linked midas library?

I know it is possible with Perl bindings - perl creates it's own shared library containing perl api glue 
linked against a foreign static library libfoo.a , so in theory, the shared library is not needed.

But perhaps, Python do things differently...

K.O.

From "history" pages, the "create elog" button stopped working - it takes us to the elog entry form, but 
then, the "submit" button does not create any elog entries, instead dumps us into an invalid history 
display. This is using the internal elog.

This change in mhttpd.c::show_elog_new() makes it work again:

-       ("<body><form method=\"POST\" action=\"./\" enctype=\"multipart/form-data\">\n");
+       ("<body><form method=\"POST\" action=\"/EL/\" enctype=\"multipart/form-data\">\n");

Problem and fix confirmed with Linux/firefox and MacOS/firefox and Safari.

K.O.

> From "history" pages, the "create elog" button stopped working - it takes us to the elog entry form, but 
> then, the "submit" button does not create any elog entries, instead dumps us into an invalid history 
> display. This is using the internal elog.
> 
> This change in mhttpd.c::show_elog_new() makes it work again:
> -       ("<body><form method=\"POST\" action=\"./\" enctype=\"multipart/form-data\">\n");
> +       ("<body><form method=\"POST\" action=\"/EL/\" enctype=\"multipart/form-data\">\n");

This was a problem with relative URLs and it is now fixed. Svn revision 4131, fixes: delete elog, make elog from odb, make elog from history.

K.O.

Having libmidas.so is absolutely necessary for pymidas to work. If there was no such
option in Makefile pymidas users would have to build it themselves.

What I proposed though is that you change Makefile so it builds libmidas.so in
addition to (not instead of) static library. So if someone prefer to build
binaries statically they
may continue to do so. On other hand when someone needs a shared library they won't 
discover that it can't be easily built.

Hi,

I have just compiled MIDAS svn 4132 on a fresh SuSE 10.3 x86_64 system and gcc 
found a bunch of bugs, I guess.

> uname -a
Linux pc 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC x86_64 x86_64 
x86_64 GNU/Linux

> gcc --version
gcc (GCC) 4.2.1 (SUSE Linux)

I see loads of warnings during compile, most of which I know from earlier 
compiles:
* warning: dereferencing type-punned pointer will break strict-aliasing rules
* warning: pointer targets in passing argument 3 of 'getsockname' differ in
           signedness

But then there is a new one (in fact lots of this one), and brief
inspection suggests this is a true bug with the possibility of truly
nasty consequences.

(1)=========================
src/midas.c:7398: warning: array subscript is above array bounds
Inspection of midas.c:

   if (i == MAX_DEFRAG_EVENTS) {
      /* no buffer available -> no first fragment received */
7398: free(defrag_buffer[i].pevent);
      memset(&defrag_buffer[i].event_id, 0, sizeof(EVENT_DEFRAG_BUFFER));
      cm_msg(MERROR, "bm_defragement_event",
             "Received fragment without first fragment (ID %d) Ser#:%d",
             pevent->event_id & 0x0FFF, pevent->serial_number);
      return;
   }

And midas.c line 7297:
EVENT_DEFRAG_BUFFER defrag_buffer[MAX_DEFRAG_EVENTS];

So, if(i==MAX_DEFRAG_EVENTS) free(defrag_buffer[i]).
I guess this is an off-by-one bug.

(2)==========================
src/midas.c:2958: warning: array subscript is above array bounds

   for (i = 0; i < 13; i++)
2958  if (trans_name[i].transition == transition)
         break;

Holy cow, hard-coded "13" in the code! Should be a #define, shouldn't it?

Now look at midas.c lines 94ff:
struct {
   int transition;
   char name[32];
} trans_name[] = {
   {
   TR_START, "START",}, {
   TR_STOP, "STOP",}, {
   TR_PAUSE, "PAUSE",}, {
   TR_RESUME, "RESUME",}, {
   TR_DEFERRED, "DEFERRED",}, {
0, "",},};

There is no trans_name[12].

The trans_name[12] shows up in line 2894 and 2790, too.

(3)=============================
mfe.c:
src/mfe.c:412: warning: array subscript is above array bounds
src/mfe.c:311: warning: array subscript is above array bounds
src/mfe.c:340: warning: array subscript is above array bounds

412: device_drv->dd(CMD_GET_DEMAND, device_drv->dd_info, i, 
          &device_drv->mt_buffer->channel[i].array[CMD_GET_DEMAND]);


   for (cmd = CMD_GET_FIRST; cmd <= CMD_GET_LAST; cmd++) {
 (..)
311:  device_drv->mt_buffer->channel[current_channel].array[cmd] = value;

   for (cmd = CMD_GET_FIRST; cmd <= CMD_GET_LAST; cmd++) {
 (..)
340:  device_drv->mt_buffer->channel[i].array[cmd] = value;


CMD_GET_DEMAND is in include/midas.h:
#define CMD_GET_DEMAND               CMD_GET_DIRECT  // = 20

I haven't even tried to understand mfe.c, nor did I read it. 
But I suspect the thing should always be something like
....array[cmd-CMD_GET_FIRST]
so array[] is indexed from [0], not from an arbitrary number that
depends on the number of commands you insert before line 698 in
midas.h. But please could the author of this check this very carefully?


(4)=========================
src/lazylogger.c:1957: warning: array subscript is below array bounds

if ((channel < 0) && (lazyinfo[channel].hKey != 0))

That is lazyinfo[something below zero].


(5)=============================
More warnings an expert might want to have a look at:

* warning: deprecated conversion from string constant to 'char*'

* src/fal.c:106: warning: non-local variable '<anonymous struct> out_info'
                 uses anonymous type
* src/fal.c:3064: warning: non-local variable '<anonymous struct> eb' uses
                  anonymous type

I attach the full output of make.
Could someone knowledgeable please have a look at these warnings and fix them?

They make me a bit nervous when thinking about data integrity, and
there are now so many that they actually start to hide serious stuff
like the ones I presented.

Oh, I got rid of the "dereferencing type-punned pointer" thing by adding
"-fno-strict-aliasing" as a compiler flag. Was suggested on the Web. Seemed to 
have worked during data taking (the data look reasonable :-). Is that a 
possible fix/workaround?


Cheers,

Randolf

> I have just compiled MIDAS svn 4132 on a fresh SuSE 10.3 x86_64 system and gcc 
> found a bunch of bugs, I guess.

Ahh, great! gcc is getting more and more clever. Each time gcc is updated, it finds
a few new issues.

Indeed some are real bugs, and I will work down the list as time permits. I see
however no immediate thread (you are not using fragmented events, a transition 12
never occurs, etc.). Issue #4 from your list has to be checked by Pierre-Andre. 

There were some trivial and some non-trivial issues. Glad the compiled picked up on
this!

> I see loads of warnings during compile, most of which I know from earlier 
> compiles:
> * warning: dereferencing type-punned pointer will break strict-aliasing rules
> * warning: pointer targets in passing argument 3 of 'getsockname' differ in
>            signedness

I ignore these for the moment until I have a gcc 4.2 myself (we use Scientific
Linux 5 which has gcc 4.1 for the moment). As Randolph pointed out correctly you
can make gcc shut up by a proper flag there. The warnings have no influence on the
stability of midas.

> (1)=========================
> src/midas.c:7398: warning: array subscript is above array bounds
> Inspection of midas.c:
> 
>    if (i == MAX_DEFRAG_EVENTS) {
>       /* no buffer available -> no first fragment received */
> 7398: free(defrag_buffer[i].pevent);
>       memset(&defrag_buffer[i].event_id, 0, sizeof(EVENT_DEFRAG_BUFFER));
>       cm_msg(MERROR, "bm_defragement_event",
>              "Received fragment without first fragment (ID %d) Ser#:%d",
>              pevent->event_id & 0x0FFF, pevent->serial_number);
>       return;
>    }

The free() was just wrong at that place, I removed it.

> (2)==========================
> src/midas.c:2958: warning: array subscript is above array bounds
> 
>    for (i = 0; i < 13; i++)
> 2958  if (trans_name[i].transition == transition)
>          break;

Fixed that by
     
     for (i=0 ;; i++)
        if (trans_name[i].name[0] == 0 || trans_name[i].transition == transition)
           break;

Since trans_name[i].name = "" indicates the end of the list.

> (3)=============================
> mfe.c:
> src/mfe.c:412: warning: array subscript is above array bounds
> src/mfe.c:311: warning: array subscript is above array bounds
> src/mfe.c:340: warning: array subscript is above array bounds
> 
> 412: device_drv->dd(CMD_GET_DEMAND, device_drv->dd_info, i, 
>           &device_drv->mt_buffer->channel[i].array[CMD_GET_DEMAND]);

The code at 412 was wrong there, the demand value is queried later by the device
driver directly. For the other two occurences (311 and 340) I had to really
increase the array size by one. This issue can cause segfaults if you have a slow
control front-end which uses multithreading (not many people use it except me).

> (4)=========================
> src/lazylogger.c:1957: warning: array subscript is below array bounds
> 
> if ((channel < 0) && (lazyinfo[channel].hKey != 0))
> 
> That is lazyinfo[something below zero].

This has to be fixed by Pierre. I guess an or instead of an and would do it, but
I'm not 100% sure.

> (5)=============================
> More warnings an expert might want to have a look at:
> 
> * warning: deprecated conversion from string constant to 'char*'
> 
> * src/fal.c:106: warning: non-local variable '<anonymous struct> out_info'
>                  uses anonymous type
> * src/fal.c:3064: warning: non-local variable '<anonymous struct> eb' uses
>                   anonymous type
> 
> I attach the full output of make.
> Could someone knowledgeable please have a look at these warnings and fix them?

Uahhh. Especially the "const char*" vs. "char*" is in principle right, but will
cause a major rework. Probably hundreds of occations have to be fixed. Many strings
must be declared const, others not. It will help the programmer to find some errors
during compile which would later show up only during runtime (like writing into a
fixed string), but I only will go through that when I have gcc 4.2 installed
myself, and have two free days to work on this ;-)

> They make me a bit nervous when thinking about data integrity, and
> there are now so many that they actually start to hide serious stuff
> like the ones I presented.

Except the slow control stuff (which only is an issue for multithreaded frontends)
none of the above things will have an influence on the data integrity. But I agree
that they should be fixed.

- Stefan

Here is the list of known problems I am aware of and of fixes not yet committed
to midas svn:

Here is the list of known problems I am aware of and of fixes not yet committed
to midas svn:

1) added variable /equiment/foo/common/PerVariableHistory breaks stuff (mostly
mhttpd). It is not clear how this problem escaped my pre-commit checks. This
per-equipment variable enables the per-variable history for the given equipment.
Local consensus is that this variable should not be in "common" and should not
be in "settings". Probably in "/history"? Or have only one variable to enable
this for all equipments at once (like we do in ALPHA).

2) writing compressed midas files (foo.mid.gz) crashes the mlogger when file
size reaches 2 GBytes. This problem could be new in SL5.1.

3) when a midas client becomes unresponsive, runs cannot be stopped using the
"stop" button in mhttpd. This is because cm_transition() loops over all attached
clients, but never removes clients that are known to be dead. Proposed fix is to
call cm_check_client() for each client before calling their rpc transition handler.

4) the discussed before fix for reading broken history files (skip bad data).

5) mhttpd history "export" button needs to be fixed (by request from ALPHA). At
present it either does not return all exiting data or crashes mhttpd. (no fix)

6) mhttpd ODB editor in "set value" page, the "cancel" button is broken (needs
to be corrected for "relative URL"). (no fix)

7) mhttpd needs AJAX-style methods for reading and writing ODB. (no fix)

K.O.

> Here is the list of known problems I am aware of and of fixes not yet committed
> to midas svn:
> 
> 1) added variable /equiment/foo/common/PerVariableHistory

corrected in svn revision 4203, read
http://savannah.psi.ch/viewcvs/trunk/src/mlogger.c?root=midas&rev=4203&sortby=rev&view=log

> 2) writing compressed midas files (foo.mid.gz) crashes the mlogger when file
> size reaches 2 GBytes. This problem could be new in SL5.1.

(no change)

> 3) when a midas client becomes unresponsive, runs cannot be stopped using the
> "stop" button in mhttpd. This is because cm_transition() loops over all attached
> clients, but never removes clients that are known to be dead. Proposed fix is to
> call cm_check_client() for each client before calling their rpc transition handler.

Fixed in SVN revision 4198, read
http://savannah.psi.ch/viewcvs/trunk/src/midas.c?root=midas&rev=4201&sortby=rev&view=log

> 4) the discussed before fix for reading broken history files (skip bad data).

Fixed in SVN revision 4202, read https://ladd00.triumf.ca/elog/Midas/482

> 5) mhttpd history "export" button needs to be fixed (by request from ALPHA). At
> present it either does not return all exiting data or crashes mhttpd. (no fix)

(no change)

> 6) mhttpd ODB editor in "set value" page, the "cancel" button is broken (needs
> to be corrected for "relative URL").

Apply this patch to src/mhttpd.c

@@ -11156,10 +11190,7 @@
          sprintf(str, "SC/%s/%s", eq_name, group);
          redirect(str);
       } else {
-         strlcpy(str, path, sizeof(str));
-         if (strrchr(str, '/'))
-            strlcpy(str, strrchr(str, '/')+1, sizeof(str));
-         redirect(str);
+         redirect("./");
       }

> 7) mhttpd needs AJAX-style methods for reading and writing ODB. (no fix)

(no change)

K.O.

> > Here is the list of known problems I am aware of and of fixes not yet committed to midas svn:
> > 1) added variable /equiment/foo/common/PerVariableHistory
> 
> corrected in svn revision 4203, read
> http://savannah.psi.ch/viewcvs/trunk/src/mlogger.c?root=midas&rev=4203&sortby=rev&view=log

Was still broken - all should work in revision 4207.

> > 2) writing compressed midas files (foo.mid.gz) crashes the mlogger when file
> > size reaches 2 GBytes. This problem could be new in SL5.1.

It turns out that on SL5 and SL5.1 (and others?) the 32-bit version of ZLIB opens the
compressed output file without the O_LARGEFILE flag, this limits the file size to 2 GB.

Fixed by opening the file ourselves, then attach compression stream using gzdopen().

Revision 4207. (Not tested on Windows - may be broken!)

> > 5) mhttpd history "export" button needs to be fixed (by request from ALPHA). At
> > present it either does not return all exiting data or crashes mhttpd. (no fix)
> 
> (no change)
> 
> > 6) mhttpd ODB editor in "set value" page, the "cancel" button is broken (needs
> > to be corrected for "relative URL").
> 
> Apply this patch to src/mhttpd.c
> 
> @@ -11156,10 +11190,7 @@
>           sprintf(str, "SC/%s/%s", eq_name, group);
>           redirect(str);
>        } else {
> -         strlcpy(str, path, sizeof(str));
> -         if (strrchr(str, '/'))
> -            strlcpy(str, strrchr(str, '/')+1, sizeof(str));
> -         redirect(str);
> +         redirect("./");
>        }
> 
> > 7) mhttpd needs AJAX-style methods for reading and writing ODB. (no fix)
> 
> (no change)
> 
> K.O.

mhttpd "messages" page stopped working after svn revision 4327 because of uninitialized variable 
"filename2" in midas.c:cm_message_retrieve(). Attached patch fixes the problem for me.
K.O.


--- src/midas.c (revision 4342)
+++ src/midas.c (working copy)
@@ -978,6 +978,8 @@
       size = sizeof(filename);
       db_get_value(hDB, 0, "/Logger/Message file", filename, &size, TID_STRING, TRUE);
 
+      strlcpy(filename2, filename, sizeof(filename2));
+
       if (strchr(filename, '%')) {
          /* replace strings such as midas_%y%m%d.mid with current date */
          tzset();

> mhttpd "messages" page stopped working after svn revision 4327 because of uninitialized variable 
> "filename2" in midas.c:cm_message_retrieve(). Attached patch fixes the problem for me.
> K.O.
> 
> 
> --- src/midas.c (revision 4342)
> +++ src/midas.c (working copy)
> @@ -978,6 +978,8 @@
>        size = sizeof(filename);
>        db_get_value(hDB, 0, "/Logger/Message file", filename, &size, TID_STRING, TRUE);
>  
> +      strlcpy(filename2, filename, sizeof(filename2));
> +
>        if (strchr(filename, '%')) {
>           /* replace strings such as midas_%y%m%d.mid with current date */
>           tzset();

Ups, was my fault, sorry. I committed your change.

I am using an external Custom web page via a link in the ODB in /Custom, and
Javascript to add customscript button(s) and run start/stop buttons.

After executing these buttons, instead of returning to the custom page, or
to the Midas main status page, there is an error page generated:

Invalid custom page: NULL path
and the URL is 

http://lxfred:8082/CS/

The behaviour is the same whether the custom page replaces the main status page
or not.

I am using
MIDAS version 2.0.0
mhttpd.c SVN Rev 4282

In an older version of mhttpd.c, buttons of this type used to return to the
Midas main status page regardless of whether the custom page replaced the status
page. I found this behaviour annoying, and I made a custom mhttpd.c that
returned to the custom page. 
Would it be possible to fix this problem, and to return to the custom page after
pressing the buttons?


Here is the Javascript to add the buttons:

<script type="text/javascript">
var rstate = '<odb src="/runinfo/run state">'

 if (rstate == 1) // stopped
    document.write('<input name="cmd" value="Start" type="submit">')
 else if (rstate == 2 // paused
    document.write('<input name="cmd" value="Resume" type="submit">')
 else  // running
 {
    document.write('<input name="cmd" value="Stop" type="submit">')
    document.write('<input name="cmd" value="Pause" type="submit">')
 }

 if (rstate == 1) // stopped
    document.write('<input name="customscript" value="tri_config" type="submit">');
</script>

In midas.c there are several places where client last activity time stamps are checked against the 
watchdog timeout and the clients are declared dead if they fail to update their activity time stamps. 
ODB time stamps and data buffer time stamps appear to be handled in a similar manner.

Most checks are done like this:

now = ss_millitime();
if (client->watchdog > 0      <----- check that the watchdog is enabled
    && now > client->last_activity    <---- check for crazy time stamps from the future
    && now - client->last_activity > client->watchdog_timeout)   <--- normal timeout
        remove_client(client);

But in a few places, the extra checks are missing:

now = ss_millitime();
if (now - client->last_activity > client->watchdog_timeout)
        remove_client(client);

Is this an oversight from when additional checks were added?
Should I make all checks read like the first one?

K.O.

When I run odbedit remotely (odbedit -h ladd09), the "cleanup" command unexpectedly produces the 
output of the "sor" command (sure enough, there is a call to db_get_open_records() there), but when I run 
it locally, I do not get this output (but db_get_open_records() is still called). Strange. K.O.