 02 May 2017, Konstantin Olchanski, Bug Report, run start/stop oddity
|
I should really get around to fix this junk error message:
|
 09 May 2017, Andreas Suter, Bug Report, mhttpd / history / export data
|
A handy feature of the history of the mhttpd is to export the data. However, this
seems to be broken. It currently only works if the run marker flag is activated by
fails otherwise. |
|
16 May 2017, Konstantin Olchanski, Bug Report, mhttpd / history / export data
|
> A handy feature of the history of the mhttpd is to export the data. However, this
> seems to be broken. It currently only works if the run marker flag is activated by
> fails otherwise.
|
|
16 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
Suddenly the mhttpd odb inline editor is truncating the odb string entries to the actual length of the
stored string value, this causes db_get_record() explode with "structure mismatch" errors. (Not my
fault, You Honor! Honest!). For example, I see these errors from al_check() after changing
|
|
31 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> What a mess.
The mess with db_get_record() and db_open_record() is even deeper than I thought. There are several anomalies.
|
|
31 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> 2) replace all uses of db_open_record(MODE_READ) with db_watch() in conjunction with db_get_record1().
Done to all in-tree programs, except for mana.c (not using it), sequencer.cxx (cannot test it) and a few places where watching a TID_INT.
|
|
02 Jun 2017, Stefan Ritt, Bug Report, problem with odb strings and db_get_record()
|
That all makes sense to me.
Stefan
|
|
06 Jun 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> Done to all in-tree programs, except for mana.c (not using it), sequencer.cxx (cannot test it) and a few places where watching a TID_INT.
> Nothing more needs to be done, other than turn off the check for hotlink in db_create_record() & co (removed #define CHECK_OPEN_RECORD in odb.c).
|
|
06 Jun 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> ... the xml reader, probably has same problem
> ... xml writer truncates long strings via truncation in db_sprintf()
|
|
19 Jun 2017, Thomas Lindner, Bug Report, mhttpd ODB editor changes string length, breaks
|
I guess this might be related to the changes in the last elog conversation; but
I'll break it out as a separate problem.
|
|
21 Jun 2017, Thomas Lindner, Bug Report, mhttpd ODB editor changes string length, breaks
|
To follow up; with some help from Konstantin and Stefan, we realized that this
particular problem should already be fixed. While I was using the most recent version
of MIDAS, I hadn't rebuild the EPICS frontend programs when I was doing this test. Once
|
|
10 Nov 2017, Frederik Wauters, Bug Report, bug in init of hv class driver
|
bug in init
-----------
|
|
17 Nov 2017, Konstantin Olchanski, Bug Report, bug in init of hv class driver
|
Hi, Frederick, this is my personal opinion on the slow controls hv classes, I have
used them a couple of times and I found them full of little buglets like this,
|
|
21 Nov 2017, Stefan Ritt, Bug Report, bug in init of hv class driver
|
> bug in init
> -----------
>
|
|
21 Nov 2017, Konstantin Olchanski, Bug Report, bug in init of hv class driver
|
>
> The original idea behind the hv driver is that all voltages in the ODB and the class driver are
> positive. If you have a negative power supply, then the voltage is inverted at the device
|
|
01 Dec 2017, Frederik Wauters, Bug Report, small bug in mfe.c init
|
There is a small bug in the mfe.c initialization for the EQ_POLLED mode. There
is a routine where the number of polls fitting in eq_info->period is counted:
|
|
01 Dec 2017, Stefan Ritt, Bug Report, small bug in mfe.c init
|
> There is a small bug in the mfe.c initialization for the EQ_POLLED mode. There
> is a routine where the number of polls fitting in eq_info->period is counted:
>
|
|
04 Dec 2017, Frederik Wauters, Bug Report, small bug in mfe.c init
|
> > There is a small bug in the mfe.c initialization for the EQ_POLLED mode. There
> > is a routine where the number of polls fitting in eq_info->period is counted:
> >
|
|
04 Dec 2017, Stefan Ritt, Bug Report, small bug in mfe.c init
|
> Thanks, I misunderstood the loop then. If poll_event(equipment[idx].info.source, (INT)count, TRUE); doesn`t do anything with "count", the loop becomes
infinite except for the overflow
> check.
|
10 Jan 2018, Andreas Suter, Bug Report, mhttpd - custom page - RHEL/Fedora 
|
Description of the problem (starting with 61be7a1):
When starting a new experiment, creating a fresh ODB and than adding the
|