Back Midas Rome Roody Rootana
  Midas DAQ System, Page 119 of 121  Not logged in ELOG logo
New entries since:Wed Dec 31 16:00:00 1969
ID Date Author Topic Subjectup
  123   15 Oct 2003 Konstantin Olchanski test
> test
> test
> test

another test

K.O.
  124   15 Oct 2003 Stefan Ritt test
> > test
> > test
> > test
> 
> another test
> 
> K.O.

I got the two email notifications, if you have tried that...
  2284   11 Oct 2021 Konstantin OlchanskiForumtest
test, no email. K.O.
  2285   11 Oct 2021 Konstantin OlchanskiForumtest
> test, no email. K.O.

test reply, no email. K.O.
  2286   11 Oct 2021 Konstantin OlchanskiForumtest
> > test, no email. K.O.
> 
> test reply, no email. K.O.

test attachment, no email. K.O.
Attachment 1: image.png
image.png
  2287   11 Oct 2021 Konstantin OlchanskiForumtest
> > > test, no email. K.O.
> > 
> > test reply, no email. K.O.
> 
> test attachment, no email. K.O.

test email. K.O.
  1984   21 Aug 2020 Ruslan PodviianiukForumtime information
Hello,

I have a few questions about time information:
1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
the attached file)
2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
example when I start a new run, value of "Start time" key is automatically changed 
to "Fri Aug 21 12:38:36 2020" without time zone. 

Thank you.
Attachment 1: Running_time.png
Running_time.png
  1985   24 Aug 2020 Stefan RittForumtime information
> 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> the attached file)

You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
1970. By subtracting this from the current time, you get the running time.

> 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> example when I start a new run, value of "Start time" key is automatically changed 
> to "Fri Aug 21 12:38:36 2020" without time zone. 

"Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
time zone involved there. The ASCII versions of the start/stop time are derived from 
the binary time using the server's local time zone. If you want to display them in a 
different time zone, you have to create a custom page and convert it to another time 
zone using JavaScript like

var d = new Date(start_time_binary);

Stefan
  1988   25 Aug 2020 Ruslan PodviianiukForumtime information
Thank you, Stefan

Ruslan 



> > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > the attached file)
> 
> You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> 1970. By subtracting this from the current time, you get the running time.
> 
> > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > example when I start a new run, value of "Start time" key is automatically changed 
> > to "Fri Aug 21 12:38:36 2020" without time zone. 
> 
> "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> time zone involved there. The ASCII versions of the start/stop time are derived from 
> the binary time using the server's local time zone. If you want to display them in a 
> different time zone, you have to create a custom page and convert it to another time 
> zone using JavaScript like
> 
> var d = new Date(start_time_binary);
> 
> Stefan
  Draft   25 Aug 2020 Ruslan PodviianiukForumtime information
 Thank you, Stefan

 >>>var d = new Date(start_time_binary);
 I need time zone because new Date() gives time related to time zone of my PC. 
 
 Ruslan 
> 
> 
> 
> > > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > > the attached file)
> > 
> > You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> > 1970. By subtracting this from the current time, you get the running time.
> > 
> > > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > > example when I start a new run, value of "Start time" key is automatically changed 
> > > to "Fri Aug 21 12:38:36 2020" without time zone. 
> > 
> > "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> > time zone involved there. The ASCII versions of the start/stop time are derived from 
> > the binary time using the server's local time zone. If you want to display them in a 
> > different time zone, you have to create a custom page and convert it to another time 
> > zone using JavaScript like
> > 
> > var d = new Date(start_time_binary);
> > 
> > Stefan
  Draft   14 Oct 2019 Joseph McKennaForumtmfe.cxx - Future frontend design
Hi,

I have been looking at the 2019 workshop slides, I am interested in the C++ future of MIDAS. 

I am quite interested in using the object oriented 


ALPHA will start data taking in 2021
  2099   25 Feb 2021 Lars MartinBug Reporttmfe_main.cxx missing include <signal.h>
The most recent commit (b43aef648c2f8a7e710a327d0b322751ae44afea) throws this 
compiler error:
src/tmfe_main.cxx:39:11: error: 'SIGPIPE' was not declared in this scope
    signal(SIGPIPE, SIG_IGN);

It's fixed by adding #include <signal.h> to that file.
  2101   25 Feb 2021 Konstantin OlchanskiBug Reporttmfe_main.cxx missing include <signal.h>
> The most recent commit (b43aef648c2f8a7e710a327d0b322751ae44afea) throws this 
> compiler error:
> src/tmfe_main.cxx:39:11: error: 'SIGPIPE' was not declared in this scope
>     signal(SIGPIPE, SIG_IGN);
> 
> It's fixed by adding #include <signal.h> to that file.

"but it works just fine on my mac!"

anyhow, thank you for reporting this problem, it already fixed. the bitbucket auto-
build also caught it. I also boogered up "make remoteonly", also fixed now.

BTW, for production use I recommend midas from the "release" branches, unless one 
needs a bug fix or new feature from the development branch.

K.O.
  2112   26 Feb 2021 Lars MartinBug Reporttmfe_main.cxx missing include <signal.h>
> BTW, for production use I recommend midas from the "release" branches, unless one 
> needs a bug fix or new feature from the development branch.

Fair point. I would suggest adding that recommendation to the wiki instructions. I 
forget to add that step otherwise.
  479   30 Apr 2008 Konstantin OlchanskiInfotriumf elog updated to elog-2.7.3-1.i386.rpm
FYI - in conjunction with replacement of ladd00.triumf.ca, this MIDAS ELOG has been updated to the latest 
version 2.7.3-2058. Please report any problems or anomalies. K.O.
  497   28 Aug 2008 Konstantin OlchanskiInfotriumf/t2k midas updates
Following changes to midas produced from the TRIUMF T2K project have been
committed to svn:
1) cm_shutdown() will now SIGKILL clients that cannot be stopped via normal
means. Previously cm_shutdown() would print a message to the effect "please kill
this client yourself manually". The user action in this case (assuming they did
not issue cm_shutdown() by mistake) has been to find out the client pid using
"ps", kill -KILL it, then "odbedit clean". cm_shutdown() now performs all this
automatically.
2) rpc_send_event() did not correctly detect loss of connection to the remote
mserver (i.e. in case it was killed by cm_shutdown() above). Now, correct error
handling is in place and the remote frontend should gracefully shutdown if
mserver connection is lost. (However I observe that some of my remote frontends
fail to exit unless I do "exit(1);" from my frontend_exit() function.
3) mhttpd bug fixed: when editing odb entries, the "cancel" button did not work
correctly.
4) lazylogger "script" backup type is now fully tested and documented. Example
scripts for writing to dcache are available by request.
5) mlogger and mhttpd changes for writing history data to an sql database are
mostly completed and will be committed after some more debugging. (If you are
interested in details, please contact me directly).
6) (committed some time ago) Makefile changes for cross-compiling midas are now
in: "make linux32", "make linux64", "make crosscompile".
K.O.
  1965   07 Aug 2020 Konstantin OlchanskiInfoupdate of MYSQL history documentation
I updated the documentation for setting up a MYSQL (MariaDB) database for 
recording MIDAS history: https://midas.triumf.ca/MidasWiki/index.php/History_System#Write_MYSQL-history_events

One thing to note: the "writer" user must have the "INDEX" permission, otherwise 
many things will not work correctly.

Included are the instructions for importing exiting *.hst history files into the 
SQL database: mh2sql --mysql mysql_writer.txt *.hst

Let me know if there is interest in adding support for writing into Postgres SQL 
database. We used to support both MySQL and Postgres through the ODBC library, 
but in the new code, each database has to be supported through it's native API. 
There is code for SQLITE, MYSQL, but no code for Postgres, although it is not too 
hard to add.

K.O.
  2170   19 May 2021 Konstantin OlchanskiInfoupdate of event buffer code
a big update to the event buffer code was merged today.

two important bug fixes:

- a logic error in bm_receive_event() (actually bm_fill_read_cache_locked()) 
caused use of uninitialized variable to increment the read pointer and crash 
with error "read pointed points to an invalid event")
- missing bm_unlock() in bm_flush_cache() caused double-locking of event buffer 
caused a hang and a subsequent crash via the watchdog timeout.

several improvements:

- bm_receive_event_vec(std::vector<char>) with automatic memory allocation, one 
does not need to worry about providing a large event buffer to receive event 
data. For local connections MAX_EVENT_SIZE is no longer used, for remote 
connections, a buffer of MAX_EVENT_SIZE is allocated automatically, this is a 
limitation of the MIDAS RPC layer (it does not know how to allocate memory to 
receive arbitrary large data)

(MAX_EVENT_SIZE is now only used in bm_receive_event_rpc()).

- rpc_send_event_sg() - thread safe method to send events to the mserver. it 
takes an array of scatter-gather buffers, so a midas event does not have to be 
in one continious buffer.

- bm_send_event_sg() - same for local connections.

- on top of bm_send_event_sg() we now have bm_send_event_vec(std::vector<char>) 
and bm_send_event_vec(std::vector<vector<char>>). now we can move forward with 
implementing a new "event object" (the TMEvent event object from midasio.h 
already works with these new methods).

- remote connected bm_send_event() & co now always send events to the mserver 
using the event socket. (before, bm_send_event() used RPC_BM_SEND_EVENT and 
suffered from the RPC layer encoding/decoding overhead. mfe.c used 
rpc_send_event() for remote connections)

- bm_send_event(), bm_receive_event() & co now take a timeout value (in 
milliseconds) instead of an async_flag. The old async_flag values BM_WAIT and 
BM_NO_WAIT continue working as expected (wait forever and do not wait at all, 
respectively).

- following improvements are only for remote connections:

- in the case of event buffer congestion (event readers are slow, event buffers 
are close to 100% full), the bm_flush_cache() RPC will no longer timeout due to 
mserver being stuck waiting for free buffer space. (RPC is called with a 1000 
msec timeout, infinite loop waiting for flush is done on the frontend side, the 
RPC timeout will never fire)

- in the case of event buffer congestion, ODB RPC will no longer timeout. 
(previously mserver was stuck waiting for free buffer space and did not process 
any RPCs).

- at the end of run, last few events could be stuck in the event socket. now, 
frontends can flush it using bm_flush_cache(0,BM_WAIT) (use zero for the buffer 
handle). correct run transition should stop the trigger, stop generating new 
events, call bm_flush_cache(0,BM_WAIT), call bm_flush_cache("SYSTEM",BM_WAIT) 
and return success. (TMFE frontend already does this). Note that 
bm_flush_cache(BM_WAIT) can be stuck for very long time waiting for the event 
buffers to empty-out, so run transition RPC timeout is still possible.

K.O.
  770   27 Jun 2011 Konstantin OlchanskiInfoupdated mhttpd history "export" function
The mhttpd history "export" function has been converted to the new midas history
interface and should now work for SQL-based history systems. In the process,
improvements by Eoin Butler (CERN AD-5/ALPHA) were merged - adding a UNIX
timestamp and a better text timestamp. Also now "export" outputs the actual
values from the history file - the scaling values from the definition of the
history plot panel are no longer applied.

Here is an example of the new file format:

Time, Timestamp, Run, Run State, SLOW
2011.06.21 15:45:21, 1308696321, 13292, 3, -89.1007

svn rev 5104
K.O.
  265   08 Jun 2006 Konstantin OlchanskiBug Fixupdated vmicvme driver
I commited the latest VMIC VME driver we use at TRIUMF. It has working support
for D32 and D64 DMA and can move data from the SIS3820 multiscaler through the
MIDAS frontend at > 30 Mbytes/sec on our VMICVME-7805 machines. The actual DMA
speed on the VME bus is around 50 Mbytes/sec, effective data rate is lower
because of a memcpy() from the kernel DMA buffer into user memory (required by
the MIDAS mvmestd.h interface, quite inefficient for DMA operations). K.O.
ELOG V3.1.4-2e1708b5