12 Apr 2013, Thorsten Lux, Forum, Persistent ipcrm error
|
>
> > Hi Stefan,
> >
|
12 Apr 2013, Thorsten Lux, Forum, Persistent ipcrm error
|
Hi,
it seems that I solved the problem in a quite brutal way.
|
28 Jun 2019, Thorsten Lux, Bug Report, Status page reloads every second
|
Hello,
We observed a strange behavior, from our point of view:
|
29 Jun 2019, Thorsten Lux, Bug Report, Status page reloads every second
|
I am sorry, yesterday evening I must have been a bit tired after a long day with a lot of
problems and error messages, so that I did not realize that yes, the frontend was finally
|
13 Nov 2014, Tim Gorringe, Forum, using single frontend with multiple "EQ_POLLED" equipments to generate different data streams
|
We have a MIDAS frontend that provides both the readout of raw events
|
24 Oct 2016, Tim Gorringe, Bug Report, problem with error code DB_NO_MEMORY from db_open_record() call when establish additional hotlinks
|
Hi Midas forum,
I'm having a problem with odb hotlinks after increasing sub-directories in an
|
25 Oct 2016, Tim Gorringe, Bug Report, problem with error code DB_NO_MEMORY from db_open_record() call when establish additional hotlinks
|
oOne additional comment. I was able to trace the setting of the error code DB_NO_MEMORY
to a call to the db_add_open_record() by mserver that is initiated during the start-up
of my frontend via an RPC call. I checked with a debug printout that I have indeed
|
08 Oct 2009, Tim Nicholls, Bug Report, mserver linking fails when using shared library
|
I have experienced a problem building MIDAS from the head of the SVN repository (rev 4458) when
specifying the shared library flag. Whie the shared library appears to compile and link OK, the
subsequent compilation of mserver fails as follows:
|
28 Apr 2014, Tom Stuttard, Forum, Words written as zero in Midas bank
|
Hi,
I am having some trouble with the data in my Midas bank. I am filling a midas
|
05 Jan 2016, Tom Stuttard, Suggestion, 64 bit bank type
|
I've seen that a similar question has been asked in 2011 but I'll ask again in
case there are any updates. Is there any way to write 64-bit data words to MIDAS
banks (other than breaking them up in to two 32-bit words, such as 2 DWORDs)
|
15 Jan 2016, Tom Stuttard, Suggestion, 64 bit bank type
|
> > I've seen that a similar question has been asked in 2011 but I'll ask again in
> > case there are any updates. Is there any way to write 64-bit data words to MIDAS
> > banks (other than breaking them up in to two 32-bit words, such as 2 DWORDs)
|
19 Jan 2016, Tom Stuttard, Suggestion, 64 bit bank type
|
> > I've seen that a similar question has been asked in 2011 but I'll ask again in
> > case there are any updates. Is there any way to write 64-bit data words to MIDAS
> > banks (other than breaking them up in to two 32-bit words, such as 2 DWORDs)
|
14 Dec 2012, Vinzenz Bildstein, Suggestion, Midas + Elog with SSL
|
I've been trying to set up midas to create an automatic elog entry at the end of
each run and I've run into a problem. I've setup an elog on our server which
uses SSL and it seems that the melog provided by midas to create logbook entries
|
17 Dec 2012, Vinzenz Bildstein, Suggestion, Midas + Elog with SSL
|
> > I've been trying to set up midas to create an automatic elog entry at the end of
> > each run and I've run into a problem. I've setup an elog on our server which
> > uses SSL and it seems that the melog provided by midas to create logbook entries
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
I wrote a c++ frontend to read data from CAEN VX1730 digitizers which is used in
parallel with the GRIFFIN frontend to read out DESCANT.
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> run the frontend inside gdb and post the stack trace after the crash?
>
> if there is no crash (the program is stopped by exit()), you may need
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > > run the frontend inside gdb and post the stack trace after the crash?
> > >
> > > if there is no crash (the program is stopped by exit()), you may need
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > >
> > > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack
> > > trace. Is this what you see?
|
10 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > > >
> > > > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack
> > > > trace. Is this what you see?
|
11 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > ... finding a current midas.log file
>
> On the "help" page, see "midas.log".
|