> I do not know how to "properly" fix this bug without changing the indexing
> scheme to something similar to what is used by elogd- message numbers instead of
> file indices. In the existing scheme, message editing also breaks URLs shown in
> the email notifications (they contain file indices that point to the wrong
> places after messages are moved around by editing) and "reply threading" links.

Well, the development of elogd with it's message numbers was actually stimulated by
the problem you mentioned. After that all those problems went away. Another
incarnation of that problem is if you edit an mhttpd log file manually. Afterwards
the file offsets are different and the system gets corrupted. To fix this properly,
one would have to backport the el_xxx functions from elogd to mhttpd, or, even
simpler, remove the elog functionality in mhttpd and "force" everybody to use elogd
(after doing elconv to convert the files into the new format).

> The current event size in midas is limited to 512k (MAX_EVENT_SIZE in midas.h)

Yes, 512 kBytes is rather small. For the T2K prototype TPC DAQ, I built and ran
MIDAS with 4 MByte events, and it worked fine.

Now, we have per-buffer tunable size (see message
https://ladd00.triumf.ca/elog/Midas/283) and in the long run, I would prefer the
compiled-in limit to go away: already all memory is allocated dynamically and
the MAX_EVENT_SIZE is only useful as kind of a sanity check against frontend
misconfiguration or against malformed events.

If MAX_EVENT_SIZE goes away, the maximum event size becomes limited by the
largest SysV shared memory segment permitted by Linux (via sysctl kernel.shmmax).

To go beyound the limit on SysV shared memories, on can use mmap() based shared
memory: this is limited by available RAM+swap (and disk space for the
.SYSTEM.SHM file). Current MIDAS system.c has an experimental implementation of
mmap() shared memory, but AFAIK it has not been used in any production system, yet.

K.O.

[quote="Stefan Ritt"][Quote="K.O.]Aparently the mhttpd elog will corrupt the
elog files if two (or more\?) elog entries are being edited at the same time.
K.O.[/quote]

The corruption is very simple. mhttpd elog indexes the elog entries by the elog
file and offset inside the file, i.e. "http://ladd00:8088/EL/060927.318",
"060927" corresponds to log file "060927.log", "318" is the offset inside the
file where the message is located.

During "edit", the code "remembers" the offset of the original message and in
el_submit() blindly writes the edited message into the file at the remembered
offset.

If another message was edited before the edit of the first message is submitted,
the remembered offset becomes invalid (messages have shifted inside the file)
and el_submit() writes the edited text into the wrong place in the file,
corrupting it.

I have now added a check for this and we crash instead of corrupting the elog
file (midas.c rev 3340).

I do not know how to "properly" fix this bug without changing the indexing
scheme to something similar to what is used by elogd- message numbers instead of
file indices. In the existing scheme, message editing also breaks URLs shown in
the email notifications (they contain file indices that point to the wrong
places after messages are moved around by editing) and "reply threading" links.

Here is how I reproduce this bug:

1) start with an empty elog
2) create two messages
3) "edit" the second message, but do not submit it yet.
4) "edit" the first message, change the text to make sure the message size
becomes different; submit this change.
5) submit the "edit" of the first message. !!BOOM!!

K.O.

> I commited the latest driver for the Wiener CCUSB USB-CAMAC driver. It
> implements all functions from mcstd.h and has been tested to be plug-compatible
> with at least one of our CAMAC frontends. K.O.

This driver is known to not work with the latest CCUSB firmware (20x, 204, 30x, 303). I know what 
modifications are required and an updated driver will be available shortly. If there is a delay, and you need the 
driver ASAP, please drop me an email.

Also, I am thinking about dropping support for the very old CCUSB firmware revisions (before 204). (Any 
comments?)

K.O.

Aparently the mhttpd elog will corrupt the elog files if two (or more?) elog entries are being edited at the 
same time. K.O.

For the record, the MIDAS (& co) forums have been physically moved from
dasdevpc.triumf.ca to our new server machine ladd00.triumf.ca. This change
should be transparent to all users, but if anything stops working, please let me
know at olchansk-at-triumf-dot-ca. K.O.

I commited minor fixes for building MIDAS on MacOS 10.4.7:
1) there is no linux/unistd.h
2) gcc 4.0.0 does not like "struct { ... } var;" although "struct Foo { ... } var;" is fine
3) there is no "_syscall0(...)" macro
4) there is no "gettid()", I used pthread_self() instead.
K.O.

P.S. ss_gettid() returns "int" instead of "midas_thread_t" (pthread_t, really). On MacOS 10.4.7 at least, 
pthread_t appears to be a pointer, not an int. Is that right?

> I commited fix for minor mhttpd problems (rev 3314):
> - elog attachments did not work for file names containing character plus (+)
> (attachement URLs should be properly encoded to escape special CGI characters)

I accidentally indirectly learned that the above change produced incorrect URLs
when more than one experiment is defined. I now commited a fix to this problem.

K.O.

I commited fix for minor mhttpd problems (rev 3314):
- for a newly created experiment, the "history" button gave the error [history
panel "" does not exist] (new problem introduced in revision 3150)
- for very long history panel names (close to the 32-character limit) history
plots produce the error "Cannot find /history/display/foo/bar/variables" (broke
in revision 3190 "use strlcpy()", in previous revisions, this bug was silent
stack corruption)
- elog attachments did not work for file names containing character plus (+)
(attachement URLs should be properly encoded to escape special CGI characters)
K.O.

> The mhttpd ODB displays and mhist truncate values of "float" and "double"
> floating point variables to 6 digits. In reality, "float" has 7 significant
> digits and "double" has 16. I recommend that db_sprintf() in odb.c be changed to
> read this:
> 
>       case TID_FLOAT:
>          sprintf(string, "%.7g", *(((float *) data) + index));
>          break;
>       case TID_DOUBLE:
>          sprintf(string, "%.16g", *(((double *) data) + index));
>          break;
> 
> K.O.

I had there

      case TID_FLOAT:
         if (ss_isnan(*(((float *) data) + index)))
            sprintf(string, "NAN");
         else
            sprintf(string, "%g", *(((float *) data) + index));
         break;
      case TID_DOUBLE:
         if (ss_isnan(*(((double *) data) + index)))
            sprintf(string, "NAN");
         else
            sprintf(string, "%lg", *(((double *) data) + index));
         break;

so I assumed that "%g" takes care of the maximal resolution. But apparently it does
not. So I changed it as you proposed.

The mhttpd ODB displays and mhist truncate values of "float" and "double"
floating point variables to 6 digits. In reality, "float" has 7 significant
digits and "double" has 16. I recommend that db_sprintf() in odb.c be changed to
read this:

      case TID_FLOAT:
         sprintf(string, "%.7g", *(((float *) data) + index));
         break;
      case TID_DOUBLE:
         sprintf(string, "%.16g", *(((double *) data) + index));
         break;

K.O.

• ODB over Frontend precedence.
  When starting a FE client, the equipment settings are taken from the ODB if this equipment already existed. This meant the ODB has precedence over the EQUIPEMENT structure and whatever change you apply to the C-Structure, it will NOT be taken in consideration until you clean (remove) the equipment tree in ODB.
  
  
• Revived 64 bit support. This was required as more OS are already supporting such architecture. Originally Midas did support Alpha/OSF/1 which operated on 64 bit machine. This new code has been tested on SL4.2 with Dual-Core 64-bit AMD Opterons.
  
  
• Multi-threading in Slow Control equipments.
  Check entry 289 in Midas Elog from Stefan.
  
  
• mhttpd using external Elog.
  The standalone ELOG package can be coupled to an existing experiment and therefore supersede the internal elog functionality from mhttpd.
  This requires a particular configuration which is described in the documentation.
  
  
• MySQL test in mlogger
  A reminder that mlogger can generate entries in a MySQL database as long as the pre-compilation flag -HAVE_MYSQL is enabled during system built. The access and form filling is then defined from the ODB under Logger/SQL once the logger is running, see documentation.
  
  
• Directory destination for midas.log and odb dump files
  It is now possible to specify an individual directory to the default midas.log file as well as to the "ODB Dump file" destination. If either of these fields contains a preceding directory, it will take the string as an absolute path to the file.
  
  
• User defined "event Data buffer size" (ODB)
  The event buffer size has been until now defined at the system level in midas.h. It is now possible to optimize the memory allocation specific to the event buffer with an entry in the ODB under /experiment, see documentation.
  
  
• History group display
  It is now possible to display an individual group of history plots. No documentation on that topics as it should be self explanatory.
  
  
• History export option
  From the History web page, it is possible to export to a ASCII .csv file the history content. This file can later be imported into excel for example. No documentation on that topics as it should be self explanatory.
  
  
• Multiple "minor" corrections:
  - Alarm reset for multiple experiment (return directly to the experiment).
  - mdump -b option bug fixed.
  - Alarm evaluation function fixed.
  - mlogger/SQL boolean handling fixed.
  - bm_get_buffer_level() was returning a wrong value which has been fixed now.
  - Event buffer bug traced and exterminated (Thanks to Konstantin).
  

> In close cooperation with Stefan, I refactored and rewrote the MIDAS event
> buffering code (bm_send_event, bm_flush_cache, bm_receive_event and bm_push_event).
>
> All are welcome to try the new code. If it explodes, please send me the error
> messages, stack traces and core dumps.

Stefan quickly found one new error (a typoe in a check against infinite looping) and
then I found one old error present in the old code that caused event loss when the
buffer became exactly 100% full (0 bytes free).

Both errors are now fixed in svn commit 3294.

K.O.

Some time ago, I accidentally introduced a bug in mfe.c- if there is data
congestion in the system, mfe.c can exit with the error "bm_flush_cache(ASYNC)
error 209" because it did not expect the valid return value BM_ASYNC_RETURN
(209) from bm_flush_cache(ASYNC). This error has now been fixed. K.O.