Hi,

I am having problems with the midas sequencer, here is my code:

1  COMMENT "Example to move a Standa stage"
2  RUNDESCRIPTION "Example movement sequence - each run is one position of a single stage
3  
4  PARAM numRuns
5  PARAM sequenceNumber
6  PARAM RunNum
7  
8  PARAM positionT2
9  PARAM deltapositionT2
10 
11 ODBSet "/Runinfo/Run number", $RunNum
12 ODBSet "/Runinfo/Sequence number", $sequenceNumber
13 
14 ODBSet "/Equipment/Neutron Detector/Settings/Detector/Type of Measurement", 2
15 ODBSet "/Equipment/Neutron Detector/Settings/Detector/Number of Time Bins", 10
16 ODBSet "/Equipment/Neutron Detector/Settings/Detector/Number of Sweeps", 1
17 ODBSet "/Equipment/Neutron Detector/Settings/Detector/Dwell Time", 100000
18 
19 ODBSet "/Equipment/MTSC/Settings/Devices/Stage 2 Translation/Device Driver/Set Position", $positionT2
20 
21 LOOP $numRuns
22  WAIT ODBvalue, "/Equipment/MTSC/Settings/Devices/Stage 2 Translation/Ready", ==, 1
23  TRANSITION START
24  WAIT ODBvalue, "/Equipment/Neutron Detector/Statistics/Events sent", >=, 1
25  WAIT ODBvalue, "/Runinfo/State", ==, 1
26  WAIT ODBvalue, "/Runinfo/Transition in progress", ==, 0
27  TRANSITION STOP
28  ODBInc "/Equipment/MTSC/Settings/Devices/Stage 2 Translation/Device Driver/Set Position", $deltapositionT2
29 
30 ENDLOOP
31 
32 ODBSet "/Runinfo/Sequence number", 0

The issue comes with line 28, the ODBInc does not work, regardless of what number I put I get the following error:

[Sequencer,ERROR] [odb.cxx:7046:db_set_data_index1,ERROR] "/Equipment/MTSC/Settings/Devices/Stage 2 Translation/Device Driver/Set Position" invalid element data size 32, expected 4

I don't see why this should happen, the format is correct and the number that I input is an int.

Sorry if this is a basic question.

Jacob

Hi Hunter 

This sounds like a Triumf specific problem; 
not a MIDAS problem.  Please email me directly 
and we can try to solve this problem.

Thomas Lindner
TRIUMF DAQ


 Hello all,
> 
> I've recently acquired a MityCAMAC system 
that was built at TRIUMF and I'm 
> having issues accessing it over ethernet.
> 
> The system: Ubuntu VM inside Windows 10 
machine.
> 
> I've tried reconfiguring the network 
settings for the VM but nmap and arp/ip 
> commands have yielded me no results in 
finding the crate controller. 
> 
> I was getting help from Pierre Amaudruz but 
I think he is now busy for some 
> time. I have the mac address of the crate 
controller and its name. The 
> controller seems to initialize fine inside 
of the CAMAC crate. The windows side 
> of the workstation also tells me that an 
unknown network is in fact connected.
> 
> I suspect I either need to do something with 
an ssh key (which I thought we 
> accomplished but maybe not), or perhaps the 
domain name in the controller needs 
> to be changed. 
> 
> If anybody has experience working with 
MityARM I would appreciate any advice I 
> could get.
> 
> Best,
> Hunter Lowe
> UNBC Graduate Physics

Midas uses various buffers (in the frontend, at the server side before the SYSTEM buffer, the SYSTEM buffer itself, on the 
logger before writing to disk. All these buffers are in RAM and have fast access, so you can fill them pretty quickly. When
they are full, the logger writes to disk, which is slower. So I believe at 2 Hz your disk can keep up with your writing 
speed, but at 4 Hz (2x8MBx4=32 MB/sec) your disk starts slowing down the writing process. Now 32MB/s is pretty slow for
a disk, so I presume you have turned compression on which takes quite some time.

To verify this, disable logging. The disable compression and keep logging. Then report back here again.

> Dear all,
>        I've a frontend writing a quite big bunch of data into a MIDAS bank (16bit output from a 4MP photo camera). 
> I'm experiencing a writing speed problem that I don't understand. When the photo camera is triggered at a low rate (< 2 Hz) 
> writing into the bank takes a very short time for each event (indeed, what I measure is the time to write and go back 
> into the polling function). If I increase the rate to 4 Hz, I see that writing the first two events takes a sort time, 
> but the third event takes a very long time (hundreds of ms), then again the fourth and fifth events are very fast, and 
> the sixth is very slow. If I further increase the rate, every other event is very slow. The problem is not in the readout 
> of the camera, because if I just remove the bank writing and keep the camera readout, the problem disappears. Can you 
> explain this behavior? Is there any way to improve it?
> 
> Below you can also find the code I use to copy the data from the camera buffer into the bank. If you have any suggestion 
> to improve it, it would be really appreciated.
> 
> Thank you very much,
>           Francesco
> 
> 
> 
>   const char* pSrc = (const char*)bufframe.buf;
> 
>   for(int y = 0; y < bufframe.height; y++ ){
> 
>     //Copy one row
>     const unsigned short* pDst = (const unsigned short*)pSrc;
> 
>     //go through the row
>     for(int x = 0; x < bufframe.width; x++ ){
> 
>       WORD tmpData = *pDst++; 
> 
>       *pdata++ = tmpData;
> 
>     }
> 
>     pSrc += bufframe.rowbytes;
> 
>   }
>  

Hello all,

I've recently acquired a MityCAMAC system that was built at TRIUMF and I'm 
having issues accessing it over ethernet.

The system: Ubuntu VM inside Windows 10 machine.

I've tried reconfiguring the network settings for the VM but nmap and arp/ip 
commands have yielded me no results in finding the crate controller. 

I was getting help from Pierre Amaudruz but I think he is now busy for some 
time. I have the mac address of the crate controller and its name. The 
controller seems to initialize fine inside of the CAMAC crate. The windows side 
of the workstation also tells me that an unknown network is in fact connected.

I suspect I either need to do something with an ssh key (which I thought we 
accomplished but maybe not), or perhaps the domain name in the controller needs 
to be changed. 

If anybody has experience working with MityARM I would appreciate any advice I 
could get.

Best,
Hunter Lowe
UNBC Graduate Physics

Dear all,
       I've a frontend writing a quite big bunch of data into a MIDAS bank (16bit output from a 4MP photo camera). 
I'm experiencing a writing speed problem that I don't understand. When the photo camera is triggered at a low rate (< 2 Hz) 
writing into the bank takes a very short time for each event (indeed, what I measure is the time to write and go back 
into the polling function). If I increase the rate to 4 Hz, I see that writing the first two events takes a sort time, 
but the third event takes a very long time (hundreds of ms), then again the fourth and fifth events are very fast, and 
the sixth is very slow. If I further increase the rate, every other event is very slow. The problem is not in the readout 
of the camera, because if I just remove the bank writing and keep the camera readout, the problem disappears. Can you 
explain this behavior? Is there any way to improve it?

Below you can also find the code I use to copy the data from the camera buffer into the bank. If you have any suggestion 
to improve it, it would be really appreciated.

Thank you very much,
          Francesco



  const char* pSrc = (const char*)bufframe.buf;

  for(int y = 0; y < bufframe.height; y++ ){

    //Copy one row
    const unsigned short* pDst = (const unsigned short*)pSrc;

    //go through the row
    for(int x = 0; x < bufframe.width; x++ ){

      WORD tmpData = *pDst++; 

      *pdata++ = tmpData;

    }

    pSrc += bufframe.rowbytes;

  }
 

I’m trying to run MIDAS using a frontend code/client named “fetiglab”. Run stops 
after 2/3sec with an error saying “Unknown error 319 from client “fetiglab” on 
localhost.

Frontend code compiled without any errors and MIDAS reads the frontend 
successfully, this only comes when I start the new run on MIDAS, here are a few 
more details from the terminal-

11:46:32 [fetiglab,ERROR] [odb.cxx:11268:db_get_record,ERROR] struct size 
mismatch for "/" (expected size: 1, size in ODB: 41920)

11:46:32 [Logger,INFO] Deleting previous file 
"/home/rcmp/online3/run00621_000.root"

11:46:32 [ODBEdit,ERROR] [midas.cxx:5073:cm_transition,ERROR] transition START 
aborted: client "fetiglab" returned status 319

11:46:32 [ODBEdit,ERROR] [midas.cxx:5246:cm_transition,ERROR] Could not start a 
run: cm_transition() status 319, message 'Unknown error 319 from client 
'fetiglab' on host "localhost"'

TR_STARTABORT transition: cleanup after failure to start a run

‌

I’ve also enclosed a screenshot for the same, any suggestions would be highly 
appreciated. thanks

ok, so retrieving as a std::array (as it was defined) does not work

    std::array<uint32_t,16> avalues = settings["FIR Energy"]["Energy Gap Value"];

but retrieving as an std::vector does, and then I have a standard c++ iterator which I can use in std stuff

    std::vector<uint32_t> values = settings["FIR Energy"]["Energy Gap Value"];

> I have 16 array odb key
> 
> {"FIR Energy", {
>             {"Energy Gap Value", std::array<uint32_t,16>(10) },
> 
> I can get the maximum of this array like 
> 
> 
> uint32_t max_value = *std::max_element(values.begin(),values.end());
> 
> but when I need the maximum of a sub range
> 
> uint32_t max_value = *std::max_element(values.begin(),values.begin()+4);
> 
> I get
> 
> /home/labor/new_daq/frontends/SIS3316Module.cpp:584:62: error: no match for ‘operator+’ (operand types are ‘midas::odb::iterator’ and ‘int’)
>   584 |   max_value = *std::max_element(values.begin(),values.begin()+4);
>       |                                                ~~~~~~~~~~~~~~^~
>       |                                                            |  |
>       |                                                            |  int
>       |               
> 
> As the + operator is overloaded for midas::odb::iterator, I was expected this to work.
> 
> (and yes, I can find the max element by accessing the elements on by one)

I have 16 array odb key

{"FIR Energy", {
            {"Energy Gap Value", std::array<uint32_t,16>(10) },

I can get the maximum of this array like 


uint32_t max_value = *std::max_element(values.begin(),values.end());

but when I need the maximum of a sub range

uint32_t max_value = *std::max_element(values.begin(),values.begin()+4);

I get

/home/labor/new_daq/frontends/SIS3316Module.cpp:584:62: error: no match for ‘operator+’ (operand types are ‘midas::odb::iterator’ and ‘int’)
  584 |   max_value = *std::max_element(values.begin(),values.begin()+4);
      |                                                ~~~~~~~~~~~~~~^~
      |                                                            |  |
      |                                                            |  int
      |               

As the + operator is overloaded for midas::odb::iterator, I was expected this to work.

(and yes, I can find the max element by accessing the elements on by one)

The short term solution would be to increase the logger timeout in the ODB under

/Programs/Logger/Watchdog timeout

and set it to 6000 (one minute). But that is curing just the symptoms. It would be 
interesting to understand the cause of this error. Probably the logger takes more than 10 
seconds to start or stop the run. The reason could be that the history grow too big (what 
we have right now in MEG II), or some disk problems. But that needs detailed debugging on 
the logger side.

Stefan

Hello,
     I'm experiencing crashes of the mlogger program on the time scale of a couple 
of days. The only messages from MIDAS are:

05:34:47.336 2021/10/24 [mhttpd,INFO] Client 'Logger' (PID 14281) on database 
'ODB' removed by db_cleanup called by cm_periodic_tasks (idle 10.2s,TO 10s)
05:34:47.335 2021/10/24 [mhttpd,INFO] Client 'Logger' on buffer 'SYSMSG' removed 
by cm_periodic_tasks (idle 10.2s, timeout 10s)

Any suggestion to further investigate this issue?

Thank you very much,
         Francesco

It worked, thank you very much!

Francesco

> > Enable IPv6                     y
> 
> Probably the IPv6 problem, see here elog:2269
> 
> I asked to turn off IPv6 by default, or at least mention this in the documentation,
> but unfortunately nothing happened.
> 
> Stefan

> Enable IPv6                     y

Probably the IPv6 problem, see here elog:2269

I asked to turn off IPv6 by default, or at least mention this in the documentation,
but unfortunately nothing happened.

Stefan

Dear all,
      I am trying to make the MIDAS web server for my DAQ project accessible from other machines. In the ODB, I activated the necessary flags:

[local:CYGNUS_RD:S]/WebServer>ls
Enable localhost port           y
localhost port                  8080
localhost port passwords        n
Enable insecure port            y
insecure port                   8081
insecure port passwords         y
insecure port host list         y
Enable https port               y
https port                      8443
https port passwords            y
https port host list            n
Host list
                                localhost
Enable IPv6                     y
Proxy                           
mime.types

Following the instructions on the Wiki I enabled the SSL support. When running mhttpd, I get these messages:

Mongoose web server will use HTTP Digest authentication with realm "CYGNUS_RD" and password file "/home/cygno/DAQ/online/htpasswd.txt"
Mongoose web server will use the hostlist, connections will be accepted only from: localhost
Mongoose web server listening on http address "localhost:8080", passwords OFF, hostlist OFF
Mongoose web server listening on http address "[::1]:8080", passwords OFF, hostlist OFF
Mongoose web server listening on http address "8081", passwords enabled, hostlist enabled
[mhttpd,ERROR] [mhttpd.cxx:19166:mongoose_listen,ERROR] Cannot mg_bind address "[::0]:8081"
Mongoose web server will use https certificate file "/home/cygno/DAQ/online/ssl_cert.pem"
Mongoose web server listening on https address "8443", passwords enabled, hostlist OFF
[mhttpd,ERROR] [mhttpd.cxx:19166:mongoose_listen,ERROR] Cannot mg_bind address "[::0]:8443"

and the server is not accessible from other machines. Any suggestion to solve or better investigate this problem?

Thank you very much,
         Francesco

> Creating an ODB key requires users to know the Type ID that are defined in 
> https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.
> 
> I can't find any information on the Midas Wiki about these values or how to find 
> them.
> 
> Am I missing something obvious?  Is there a way to improve how to find these values?  
> Or is this not the best way to interact with the ODB?

Well, you found them in midas.h, so where is the problem?

If you want a more detailed description, just look in the midas documentation (RTFM):

https://midas.triumf.ca/MidasWiki/index.php/Midas_Data_Types

If you want a more modern interface to the ODB without these data types, look here:

https://midas.triumf.ca/MidasWiki/index.php/Odbxx

Best regards,
Stefan

Creating an ODB key requires users to know the Type ID that are defined in 
https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.

I can't find any information on the Midas Wiki about these values or how to find 
them.

Am I missing something obvious?  Is there a way to improve how to find these values?  
Or is this not the best way to interact with the ODB?

The midas forum software (elogd) was updated to latest version and moved from our old server 
(ladd00.triumf.ca) to our new server (daq00.triumf.ca).

The following URLs should work:

https://daq00.triumf.ca/elog-midas/Midas/ (new URL)
https://midas.triumf.ca/elog/Midas/ (old URL, redirects to daq00)
https://midas.triumf.ca/forum (link from midas wiki)

The configuration on the old server ladd00.triumf.ca is quite tangled between
several virtual hosts and several DNS CNAMEs. I think I got all the redirects
correct and all old URLs and links in old emails & etc still work.

If you see something wrong, please reply to this message here or email me directly.

K.O.

> > > test, no email. K.O.
> > 
> > test reply, no email. K.O.
> 
> test attachment, no email. K.O.

test email. K.O.

> > test, no email. K.O.
> 
> test reply, no email. K.O.

test attachment, no email. K.O.

> test, no email. K.O.

test reply, no email. K.O.

test, no email. K.O.