 28 Dec 2005, Konstantin Olchanski, Suggestion, Handling multiple identical USB devices
|
When I wrote the musbstd.h "open" method, I kind of punted on the problem of
handling multiple identical USB devices. Instead of a real solution, I added an
"instance" parameter, which allows one to "open" the "first", "second", etc USB
|
 03 Jan 2006, Stefan Ritt, Suggestion, Handling multiple identical USB devices
|
> Any thoughts?
I got an idea of how to solve this problem in an OS-independent manner. The USB
|
|
30 Dec 2005, Konstantin Olchanski, Bug Report, mhttpd "edit on start" broken for arrays
|
If a variable under "/experiment/edit on start/" is an array, it is correctly
offered for editing on the "start run page", but then all elements in the array
end up set to the value of the first element.
|
|
03 Jan 2006, Stefan Ritt, Bug Report, mhttpd "edit on start" broken for arrays
|
> If a variable under "/experiment/edit on start/" is an array, it is correctly
> offered for editing on the "start run page", but then all elements in the array
> end up set to the value of the first element.
|
|
18 Aug 2005, Konstantin Olchanski, Info, minor changes to run transition code
|
Minor changes to run transitions code:
- improve debug messages
- fail transition if cannot connect to one of the clients
|
|
23 Dec 2005, Konstantin Olchanski, Bug Report, minor changes to run transition code
|
> Minor changes to run transitions code:
> - fail transition if cannot connect to one of the clients
|
|
24 Dec 2005, Stefan Ritt, Bug Report, minor changes to run transition code
|
> I am now considering allowing the run to end even if some clients cannot be
> contacted. The begin, pause and resume transitions would continue to fail if
> clients cannot be contacted.
|
|
22 Dec 2005, Konstantin Olchanski, Info, midas max event size?
|
My TPC events are fairly large: 18 FEC cards * 128 channels per card * 2 Kbytes
per channel = about 4 Mbytes. In my
frontend, when I request this event size, MIDAS complaints (in mfe.c) that it is
|
|
23 Dec 2005, Stefan Ritt, Info, midas max event size?
|
> My TPC events are fairly large: 18 FEC cards * 128 channels per card * 2 Kbytes
> per channel = about 4 Mbytes. In my
> frontend, when I request this event size, MIDAS complaints (in mfe.c) that it is
|
|
14 Dec 2005, Konstantin Olchanski, Bug Report, misc problems
|
I would like to document a few problems I ran into while setting up a new
experiment (two USB interfaces to Alice TPC electronics, plus maybe a USB
interface to CAMAC). I am using a midas cvs checkout from last October, so I am
|
|
02 Dec 2005, Greg Hackman, Info, MIDAS on Cygwin
|
If you want to run MIDAS on Cygwin, make sure you have cygserver running. First set a Windows system environment variable CYGWIN=server. This is best
done through the Control Panel -> System -> Advanced -> Environment Variables. Then run /usr/bin/cygserver-config in a Cygwin console window. Then reboot.
After that your MIDAS executables should run properly.
|
|
23 Nov 2005, Stefan Ritt, Bug Fix, Endian swapping in mana.c
|
It was reported that following code in mana.c :
[code]
|
|
02 Nov 2005, Stefan Ritt, Suggestion, Where to put drivers?
|
Hi,
I would like to raise the question where to put the midas drivers.
|
|
06 Nov 2005, Pierre-Andre Amaudruz, Suggestion, Where to put drivers?
|
[quote="Stefan Ritt"]Hi,
I would like to raise the question where to put the midas drivers.
|
|
06 Nov 2005, Stefan Ritt, Suggestion, Where to put drivers?
|
[quote="Stefan Ritt"]We have both the example experiment and the MSCB Makefile which both expect to find the midas drivers under [b]$MIDASSYS/drivers/camac[/b]
or [b]$MIDASSYS/drivers/usb[/b]. The documentation does not explicitely mention to define MIDASSYS as [b]/usr/local[/b], but some people do it. That however
requires to put all drivers then under [b]/usr/local/drivers[/b], which is not the case in the current Makefile for midas. Do you think that we should |
|
23 Aug 2005, Konstantin Olchanski, Info, new mvmestd api
|
For some time now, we have been thinking of updating the programming interface
for the VME bus interface drivers- mvmestd.h.
|
|
01 Sep 2005, Stefan Ritt, Info, new mvmestd api
|
Good that you brought up the MIDAS VME API again, since this is still not complete, but
has to be completed soon.
|
|
01 Sep 2005, Stefan Ritt, Suggestion, new mvmestd api
|
Anothe idea which comes to my mind, we could make it kind of object oriented, like
typedef struct {
|
|
10 Sep 2005, Konstantin Olchanski, Info, new mvmestd api
|
> Good that you brought up the MIDAS VME API again, since this is still not complete, but
> has to be completed soon.
|
|
11 Sep 2005, Stefan Ritt, Info, new mvmestd api
|
> Right, but I can only complete the parts that I thought of and for which I already have
> code. This leaves out support for DMA (read: any block transfers) and interrupts.
|
|
02 Nov 2005, I. K. arapkorir, Info, new mvmestd api
|
I manage to access some vme modules with the older vmicvme interface and seemed
confused with the
new interface as the sample code provided does not have a specific test sample.
|
|
02 Nov 2005, Pierre-Andre Amaudruz, Info, new mvmestd api
|
> I manage to access some vme modules with the older vmicvme interface and seemed
> confused with the
> new interface as the sample code provided does not have a specific test sample.
|
|
17 Oct 2005, Exaos Lee, Bug Fix, "make install" error under MacOS X
|
Under MacOS X, "make install" will cours an error like this:
[code]
...
|
|
10 Oct 2005, Stefan Ritt, Info, Bus drivers moved in repository
|
The previous midas/drivers/bus dirctory contains both midas slow control bus drivers plus vme & fastbus & camac drivers. I separated them now in different
directories:
|
|
15 Oct 2005, Exaos Lee, Info, Bus drivers moved in repository
|
The Makefile should be modified too. Please see the diff below:
[code]
diff Makefile Makefile.modify
|
|
07 Oct 2005, Stefan Ritt, Info, MIDAS moved from CVS to Subversion
|
Dear Midas users,
I have moved midas from CVS to Subversion today. There were many reasons for doing so, which I don't want to explain in detail here. To use the new repository, |
|
03 Oct 2005, Stefan Ritt, Info, Revised MVMESTD API
|
Dear MIDAS users and developers,
The "Midas VME Standard API" has been revised. We tried to incorporate all
|
|
19 Sep 2005, Konstantin Olchanski, Info, Added driver for the Wiener CC-USB CAMAC interface
|
Commited to CVS is the preliminary driver for the Wiener CC-USB CAMAC interface.
The driver implements all the mcstd.h camac access functions, except for those
not supported by hardware (8-bit operations, interrupts) and a few esoteric
|
|
18 Aug 2005, Konstantin Olchanski, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
It turns out that the new priority sequencing of run state transitions had a
flaw: the frontends, the analyzer and the logger all registered at priority 500
and were invoked in essentially a random order. For example the frontend could
|
|
01 Sep 2005, Stefan Ritt, Bug Fix, fix race condition between clients on run start/stop, pause/resume
|
> It turns out that the new priority sequencing of run state transitions had a
> flaw: the frontends, the analyzer and the logger all registered at priority 500
> and were invoked in essentially a random order. For example the frontend could
|
|
18 Aug 2005, Konstantin Olchanski, Info, midas Makefile changes
|
Minor Makefile changes:
- add "-m32" gcc flag to force 32-bit compilation on 64-bit Linux.
- do not link ybos.o into lazylogger and mdump.
|
|
02 Aug 2005, Konstantin Olchanski, Bug Fix, fix odb corruption when running analzer for the first time
|
I have been plagued by ODB corruption when I run the analyzer for the first time
after setting up the new experiment. Some time ago, I traced this to
mana.c::book_ttree() and now I found and fixed the bug, fix now commited to
|
|
05 May 2005, Konstantin Olchanski, Bug Fix, fix: minor bit rot in the example experiment
|
I fixed some minor bit rot in the example experiment: a few minor Makefile
problems, make the analyzer use the current histogram creation macros, etc. I
also added startup and shutdown scripts. These will be documented as we work
|
|
02 May 2005, Stefan Ritt, Info, strlcpy/strlcat moved into separate file
|
I had to move strlcpy & strlcat into a separate file "strlcpy.c". A header file
"strlcpy.h" was added as well. This way one can omit the old HAVE_STRLCPY which
made life hard. The windows and linux makefiles were adjusted accordingly, but
|
|
21 Apr 2005, Konstantin Olchanski, Suggestion, Correct MIDASSYS setting?
|
Current MIDAS versions nag me about setting the env.variable MIDASSYS to the
"midas installation directory", but I do not have one, so what should I set
MIDASSYS to? I checkout MIDAS from cvs into /home/olchansk/daq/midas, build it
|
|
22 Apr 2005, Stefan Ritt, Suggestion, Correct MIDASSYS setting?
|
> Current MIDAS versions nag me about setting the env.variable MIDASSYS to the
> "midas installation directory", but I do not have one, so what should I set
> MIDASSYS to? I checkout MIDAS from cvs into /home/olchansk/daq/midas, build it
|