 02 Nov 2004, Renee Poutissou, Info, Event Builder info in mhttpd Status page
|
Information about the Event Builder statistics has been removed from the
Status page in mhttpd. I heard from Pierre that this information might
be redundant when using the new Event Builder format???
|
|
22 Oct 2004, Konstantin Olchanski, Bug Fix, mhttpd message colouring
|
I commited a fix to mhttpd logic that decides which messages should be shown in
"red" colour- before, any message with square brackets and colons would be
highlighted in red. Now only messages matching the pattern [...:...] are
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, TWIST upgrade bombed...
|
The upgrade of TWIST to the latest midas has bombed- we see mevb and mlogger
crashes during shared memory data buffer accesses. I am looking into it and I
will add information as I figure things out. K.O. |
 13 Oct 2004, Pierre-Andre Amaudruz, Bug Report, TWIST upgrade bombed...
|
> The upgrade of TWIST to the latest midas has bombed- we see mevb and mlogger
> crashes during shared memory data buffer accesses. I am looking into it and I
> will add information as I figure things out. K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, TWIST upgrade bombed...
|
> > The upgrade of TWIST to the latest midas has bombed- we see mevb and mlogger
> > crashes during shared memory data buffer accesses. I am looking into it and I
> > will add information as I figure things out. K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, TWIST upgrade bombed...
|
> The upgrade of TWIST to the latest midas has bombed- we see mevb and mlogger
> crashes during shared memory data buffer accesses. I am looking into it and I
> will add information as I figure things out. K.O.
|
|
14 Oct 2004, Stefan Ritt, Bug Report, TWIST upgrade bombed...
|
Agree.
Once you did the modification, please check following situation: Create a fresh
|
|
14 Oct 2004, Konstantin Olchanski, Bug Report, TWIST upgrade bombed...
|
> The upgrade of TWIST to the latest midas has bombed- we see mevb and mlogger
> crashes during shared memory data buffer accesses. I am looking into it and I
> will add information as I figure things out. K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Suggestion, No al_clear_alarm()?
|
We have al_trigger_alarm(), but no matching al_clear_alarm(), and I need it to
clear my alarm once the alarm condition no longer exists. Any objections if I
add this function? K.O. |
|
13 Oct 2004, Stefan Ritt, Suggestion, No al_clear_alarm()?
|
> We have al_trigger_alarm(), but no matching al_clear_alarm(), and I need it to
> clear my alarm once the alarm condition no longer exists. Any objections if I
> add this function? K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Suggestion, No al_clear_alarm()?
|
> > We have al_trigger_alarm(), but no matching al_clear_alarm(), and I need it to
> > clear my alarm once the alarm condition no longer exists. Any objections if I
> > add this function? K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, silly odbedit "rename Display xxx/yyy"
|
odbedit command "rename Display xxx/yyy" creates a key named "xxx/yyy" (yes,
with a slash in the name) and this key cannot be deleted or renamed...
K.O. |
|
13 Oct 2004, Stefan Ritt, Bug Report, silly odbedit "rename Display xxx/yyy"
|
> odbedit command "rename Display xxx/yyy" creates a key named "xxx/yyy" (yes,
> with a slash in the name) and this key cannot be deleted or renamed...
> K.O.
|
|
13 Oct 2004, Konstantin Olchanski, Bug Report, db_paste: found string exceeding MAX_STRING_LENGTH
|
I am updating TWIST to the latest MIDAS and when I load a saved .odb file, I get
these messages. Their text ought to say where and what strings it does not like.
K.O.
|
|
13 Oct 2004, Stefan Ritt, Bug Report, db_paste: found string exceeding MAX_STRING_LENGTH
|
Can you attach
/twist/data_onl/current/run17548.odb
|
|
29 Sep 2004, Stefan Ritt, Info, Increased number of clients in midas.h, important!
|
Due to some request several limitations like the maximal number of clients to the ODB have
been increased in midas.h and committed to CVS. It is important to note that clients compiled
with the old limits cannot coexist with clients compiled with the new limits. You will get
|
|
03 Oct 2004, Konstantin Olchanski, Info, Increased number of clients in midas.h, important!
|
> It is important to note that clients compiled
> with the old limits cannot coexist with clients compiled with the new limits. You will get
> ODB corruption notifications and everything will crash, and you wonder where this comes from.
|
|
03 Oct 2004, Stefan Ritt, Info, Increased number of clients in midas.h, important!
|
> Stefan, to avoid confusion from crashes caused by incompatible ODBs would it be possible to add a "version number" to ODB,
together with a check and an error message
> saying "oops... incompatible ODB, please rebuild your programs"? We tend to have different versions of midas floating around and
|
|
03 Oct 2004, Konstantin Olchanski, Info, Increased number of clients in midas.h, important!
|
> However, we are planning to make a new release 1.9.5 soon (next week), so can can people tell not to "mix" 1.9.5 with pre-1.9.5 programs.
Right. We cannot fix the past, but we should fix the future. BTW, "do not mix versions" is hard to enforce and mismatches did, do and
|
|
04 Oct 2004, Stefan Ritt, Info, Increased number of clients in midas.h, important!
|
> Right. We cannot fix the past, but we should fix the future. BTW, "do not mix versions" is hard to enforce and mismatches did, do and
> will happen
|
|
08 Oct 2004, chris pearson, Info, Increased number of clients in midas.h, important!
|
> > For one thing, looking at a given midas-using executable, how do I tell what version of midas it has inside?
>
|
|
08 Oct 2004, Konstantin Olchanski, Info, Increased number of clients in midas.h, important!
|
> A lot of programs have a commandline option, such as "--version", where they return the program version number then exit. As well as the
> program version number, the version number of the midas library it's linked with could also be returned (There can be more than one
> libmidas.so on a system and this would show which one was currently being linked)
|
|
03 Oct 2004, Konstantin Olchanski, Info, mscb usb support for macosx
|
After a felicitous confuence of stellar bodies (Stefan, myself, some mscb hardware
and a mac laptop all in the same room for a few days), I wrote some MacOSX
code to support the MSCB-USB dongle using the native IoKit USB API. During testing,
|
|
03 Oct 2004, Stefan Ritt, Info, Introduction of new transition scheme
|
A new transition scheme has been implemented and committed. Previously, one had the
possibility to register for PRE/POST transitions, which was necessary in order to first
stop the frontends, then stop the logger to close the data file. While this scheme
|
|
28 Sep 2004, Piotr Zolnierczuk, Forum, MIDAS/MVME167/Linux
|
Hi,
has anyone tried runnning midas frontend on a Linux running
on a Motorola MVME167 motorola embedded CPU?
|
|
12 Jun 2003, Pierre-André Amaudruz, , Tape handling
|
- remove ss_tape_get_blockn from lazylogger.c
- add ss_tape_get_blockn to system.c
- add ss_tape_get_blockn prototype into midas.h
|
|
17 Jun 2003, Stefan Ritt, , example experiment makefile for NT
|
I have added ROOT support to midas\examples\experiment\makefile.nt. To
compile the example experiment under Windows, one needs
|
|
26 Jun 2003, David Morris, , pthreads for Linux
|
Added ss_create_thread support for Linux in system.c
Added pthread library in main make file |
|
26 Jul 2003, Konstantin Olchanski, , more ODB checks in src/odb.c
|
Add more checks to db_validate_key() for pkey->total_size, item_size and
num_values. Automatically correct total_size to be item_size*num_values (we
saw this corruption and tested this fix).
|
|
26 Jul 2003, Konstantin Olchanski, , use "odbedit -C" to connect to corrupted ODB
|
Add switch "-C" to odbedit to allow it to connect to corrupted ODB. Then,
depending on corruption, the user can manually remove or correct the
corrupted entries. Also, some corruption is automatically fixed by "odbedit"
|
|
29 Jul 2003, Konstantin Olchanski, , Have to link with -lpthread?
|
It appears that all midas applications are now required to link with the
pthreads library even if they do not use threads. This is caused by a
pthread_create() call from ss_thread_create() in system.c.
|
|
30 Jul 2003, David Morris, , Have to link with -lpthread?
|
The change is required to support implementation of pthreads in the Linux
compile of Midas. This was added recently. I believe pthreads is also needed
for ROOT based compiles.
|
|
19 Aug 2003, Pierre-André Amaudruz, , minor fixes, new tarball 1.9.3-1
|
- add pthread lib to examples/... makefile
- fix ybos_simfe.c for max_event_size
- fix camacnul.c for cam_inhibit_test(), cam_interrupt_test()
|
|
02 Sep 2003, Pierre-André Amaudruz, , minor fix, window build
|
- makefile.nt (/examples/experiment, /hbook)
adjusted for local hmana.obj build as for rmana.obj, add cvs tag for
revision comment entry.
|
|
11 Aug 2003, Konstantin Olchanski, , mhttpd crash on corrupted ODB /RunInfo
|
Invalid values of ODB /RunInfo/State cause mhttpd crash in
show_status_page() because of an out of bounds access to the array of state
names. Suggest this fix: remove array of state names, use existing ladder of
|
|
10 Oct 2003, Konstantin Olchanski, , mhttpd crash on corrupted ODB /RunInfo
|
There was no feedback. This code has been commited. K.O.
> Invalid values of ODB /RunInfo/State cause mhttpd crash in
|
|
12 Oct 2003, Konstantin Olchanski, , Refuse to set run number zero
|
I am debugging the frequent problem where the run number is mysteriously
reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
- abort on obviously corrupted "run number < 0"
|
|
12 Oct 2003, Konstantin Olchanski, , Refuse to set run number zero
|
> I am debugging the frequent problem where the run number is mysteriously
> reset to zero. As a first step, I am commiting changes to mhttpd.c and midas.c:
> - abort on obviously corrupted "run number < 0"
|