> > I am getting a series of errors from MIDAS that I do not understand, so I hope
> > someone can help me figure this out.
> > 
> > I am attempting to run many frontends on one machine. I can run 8 with no
> > problem, but if I try to add a 9th I get errors relating to send_tcp. 
> > 
> > I have tried adjusting the max event sizes and buffer sizes, but it has not
> > resolved the problem. I also tried adjusting the data rates and the total data
> > volume going through each frontend, but there was no change. And as far as I can
> > tell I am not up against any hardware limits.
> > 
> > The errors are repeated continuously while a run is going. The three errors I
> > get are:
> > 
> > 16:45:22 [FakeData09,ERROR] [midas.c:9958:rpc_client_call,ERROR] send_tcp() failed
> > 16:45:22 [FakeData09,ERROR] [frontend_rpc.c:191:rpc_call,ERROR] No RPC to master
> > 16:45:22 [FakeData09,ERROR] [system.c:4166:send_tcp,ERROR]
> > send(socket=9,size=16) returned -1, errno: 32 (Broken pipe)
> > 
> > If you have any suggestions of how I can debug this, please let me know. Thanks!
> 
> Can you tell me
> 
> - why you need 9 frontends
> - what kind of data your frontends produce
> - how your event builder looks like and how you assemble the fragments
> - what messages/errors you see when you run odbedit BEFORE the crash
> 
> /Stefan

Our experiment will need 24 frontends that will each run on its own machine. For now we
want to run 24 "fake" frontends on one machine for testing purposes. 9 is the limit
where it stops working properly. 

We have a pulser that is giving us periodic data at a constant rate. We have a master
frontend running on a different PC in interrupt mode that assembles the events, and then
N "FakeData" frontends running in polled mode on a single PC. 

We do have an event builder, but we get these errors whether the event builder is
running or not.

At the start of a run, I see the following messages:

[mtransition,INFO] Run #21 started
Sat Feb 9 16:14:57 2013 [FakeData09,ERROR] [system.c:4166:send_tcp,ERROR]
send(socket=9,size=16) returned -1, errno: 104 (Connection reset by peer)
Sat Feb 9 16:14:57 2013 [FakeData09,ERROR] [midas.c:9958:rpc_client_call,ERROR]
send_tcp() failed
Sat Feb 9 16:14:57 2013 [FakeData09,ERROR] [frontend_rpc.c:191:rpc_call,ERROR] No RPC to
master
Sat Feb 9 16:14:57 2013 [master,ERROR] [midas.c:10844:recv_tcp_server,ERROR] Cannot
allocate 268435512 bytes for network buffer
Sat Feb 9 16:14:57 2013 [master,ERROR] [midas.c:12893:rpc_server_receive,ERROR]
recv_tcp_server() returned -1, abort
Sat Feb 9 16:14:57 2013 [master,TALK] Program 'FakeData09' on host 'fe01' aborted

After this it recycles just the first three errors that I mentioned above.

Thank you for the help. As it turns out, the problem was due to the fact that we were compiling MIDAS on our 64 bit backend machine, but one of the frontend machines is 32 bit. The problem was resolved by compiling a 32 bit version of MIDAS in
addition to the 64 bit version.

I am having some trouble creating a frontend that interacts with some libraries that use C++11. 

The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
causes an error in the equipment description in the frontend code.

The error I get is:

frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
}

This corresponds to the following in the MIDAS frontend code.

EQUIPMENT equipment[] = { 
  {
   "MWPC",                           /* equipment name */
   {1, TRIGGER_ALL,                  /* event ID, trigger mask */
     "BUF2",                        /* event buffer */
     EQ_POLLED | EQ_EB,              /* equipment type */
     LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
     "MIDAS",                        /* format */
     TRUE,                           /* enabled */
     RO_RUNNING,                     /* read only when running */
     1,                              /* poll for 1ms */
     0,                              /* stop run after this event limit */
     0,                              /* number of sub events */
     0,                              /* don't log history */
     "", "", "",},
    read_trigger_event,              /* readout routine */
  },

   {""}
};  <- this is line 149
#ifdef __cplusplus
}
#endif

Do you know a way to make this compatible with C++11?

Thanks!

> > I am having some trouble creating a frontend that interacts with some libraries that use C++11. 
> > 
> > The flag I added to my MIDAS Makefile to get the C++11 part of the code to work is -std=c++0x. This 
> > causes an error in the equipment description in the frontend code.
> > 
> > The error I get is:
> > 
> > frontend.cpp:149: error: narrowing conversion of ‘-0x00000000000000001’ from ‘int’ to ‘WORD’ inside { 
> > }
> > 
> > This corresponds to the following in the MIDAS frontend code.
> > 
> > EQUIPMENT equipment[] = { 
> >   {
> >    "MWPC",                           /* equipment name */
> >    {1, TRIGGER_ALL,                  /* event ID, trigger mask */
> >      "BUF2",                        /* event buffer */
> >      EQ_POLLED | EQ_EB,              /* equipment type */
> >      LAM_SOURCE(0, 0xFFFFFF),        /* event source crate 0, all stations */
> >      "MIDAS",                        /* format */
> >      TRUE,                           /* enabled */
> >      RO_RUNNING,                     /* read only when running */
> >      1,                              /* poll for 1ms */
> >      0,                              /* stop run after this event limit */
> >      0,                              /* number of sub events */
> >      0,                              /* don't log history */
> >      "", "", "",},
> >     read_trigger_event,              /* readout routine */
> >   },
> > 
> >    {""}
> > };  <- this is line 149
> > #ifdef __cplusplus
> > }
> > #endif
> > 
> > Do you know a way to make this compatible with C++11?
> > 
> > Thanks!
> 
> Is this maybe related to the LAM_SOURCE(0, 0xFFFFFFFF) where 0xFFFFFFFF is -1. I guess you are not using CAMAC, so just replace the 
> LAM_SOURCE(...) with zero and try again.
> 
> /Stefan

Thanks for the suggestion. It looks like it is instead the TRIGGER_ALL that is causing the problem. TRIGGER_ALL is defined as -1 in midas.h. If I replace TRIGGER_ALL with 0 in the 
frontend, it compiles, but if I use -1, I get the same error. I do not think that I want my trigger mask set to 0. Do you have a suggestion of how to get around this?

To answer the other questions, we are running on SLF6. I am building a frontend for a MWPC to read data from CAEN TDCs.

For our MIDAS installation at Fermilab, it is necessary that we be able to write to a PosgresQL 
database (MySQL is not supported here). This will be required of both mlogger and mscb. 

Has anyone done this before? And do you know of a relatively simple way of implementing it, or do 
we need to replicate the mysql functions that are already in the mlogger/mscb code to add functions 
that perform the equivalent Posgres commands?

Thanks!
Wes

SIGSEGV is a segmentation fault. Most often it means some ODB parameter is out of bounds or there is 
an invalid memcpy somewhere in your code.

> Hello, I am new in the forum. We are running an experiment for a week with no
> problems. Now we add a detector a we found an error. Even we come back to our
> previous configuration the error continues appearing. Please, may someone help
> us? You can find the error in the attachment. Thanks!

After pulling the newest version of midas, our compilation would fail on
bk_create, with the error:

frontend.cpp:954: error: invalid conversion from ‘DWORD**’ to ‘void**’
frontend.cpp:954: error:   initializing argument 4 of ‘void bk_create(void*,
const char*, WORD, void**)’

I noticed a change to the function in midas.c that changes the type of pdata
from a pointer to a double pointer, and changes 

      *((void **) pdata) = pbk + 1;
to
      *pdata = pbk + 1;

The fix is simple. In each call to bk_create, I changed it to:

bk_create(pevent, bk_name, TID_DWORD, (void**)&pdata); 

I suggest updating the documentation. Also, why the change? Does it add some
improvement in efficiency?

Can the MIDAS Sequencer call an external script? It seems that it should be able to. I have a simple 
test script to do so. It claims to execute, but the bash script never appears to be executed. Any 
suggestions?

1 COMMENT "This is a MSL test file"
  2 RUNDESCRIPTION "Test run"
  3 
  4 LOOP setting, 1,2, 3
  5      SCRIPT test_wheel.sh ,$setting 
  6      TRANSITION START
  7      WAIT Seconds 10
  8      TRANSITION STOP
  9 ENDLOOP

I've also tried using an xml script with <Script params="1">test_wheel.sh</Script>, but with the same 
result.

Thanks!

Nevermind. I just had to give it a path to my script. Now it's fine. 

> Can the MIDAS Sequencer call an external script? It seems that it should be able to. I have a simple 
> test script to do so. It claims to execute, but the bash script never appears to be executed. Any 
> suggestions?
> 
> 1 COMMENT "This is a MSL test file"
>   2 RUNDESCRIPTION "Test run"
>   3 
>   4 LOOP setting, 1,2, 3
>   5      SCRIPT test_wheel.sh ,$setting 
>   6      TRANSITION START
>   7      WAIT Seconds 10
>   8      TRANSITION STOP
>   9 ENDLOOP
> 
> I've also tried using an xml script with <Script params="1">test_wheel.sh</Script>, but with the same 
> result.
> 
> Thanks!

Hi. Is it currently possible to automatically save the MIDAS ODB as a JSON file?
I can do it manually in odbedit, but it looks like the only option for the
automatic ODB save for each run is the standard .ODB format. Is there a way to
change this?

Since updating to the most recent midas commit, we get the following error if we try running mhttpd without su privileges: 

>mhttpd -e CR --http 8081
mhttpd is running in setuid-root mode.
mhttpd is listening on port 80
Mongoose version 4 cannot listen to port 80 in setuid mode. Please use mongoose version 6. Sorry, bye!
[mhttpd,ERROR] [midas.c:1960:,ERROR] cm_disconnect_experiment not called at end of program

It works if we run it as root, but that creates other problems. Is there a flag to turn off setuid-root mode? Or some other fix?

Thanks,
Wes

Hi everyone, 

We have recently been experiencing a lot of lag with our midas control webpage,
which is making it very frustrating to use. Has anyone experienced this, and do
you have any advice to speed it up? Are there particular web browsers that work
better than others, or certain settings that can make respond more quickly?

Thanks!
Wes

Below are the steps we used to increase the maximum number of frontends that we could run.

In midas.h

#define MAX_CLIENTS            64

changed to

#define MAX_CLIENTS            128

In msystem.h:

#define MAX_RPC_CONNECTION     64

changed to

#define MAX_RPC_CONNECTION     128

In odb.c:

assert(sizeof(BUFFER_HEADER) == 16444); 

GUESS: 256*64+60 = 16444, so change 64 to 128

changed to:                                                                                                                         

assert(sizeof(BUFFER_HEADER) == 32828); //256*128+60

 

DATABASE_HEADER = 64 + 64*DATABASE_CLIENT = 64 + 64*8256 = 528448

changed to:

DATABASE_HEADER = 64 + 128*DATABASE_CLIENT = 64 + 128*8256 = 1056832.

Hi. We've just updated our midas installation to the newest version, and we now see repeated errors from the 
mserver in messages. Mostly we see

11:17:02.994 2018/08/21 [ODBEdit,TALK] Program mserver restarted

which happens 2-3 times per minute. 

We have also been seeing occasional dropped rpc connections to our frontends, which could be related. 

The version we were running with previously was ~1 year old, and we have just updated to the newest version 
on bitbucket. 

Thanks,
Wes

I've been trying to set up midas to create an automatic elog entry at the end of
each run and I've run into a problem. I've setup an elog on our server which
uses SSL and it seems that the melog provided by midas to create logbook entries
doesn't know any SSL.

My solution to this was to copy the crypt.c from the elog package to the
computer running midas and changed melog.c and the makefile to use SSL if a flag
-s is used. Does this seem like a sensible solution or did I oversee the obvious
and/or right way to do this?

> > I've been trying to set up midas to create an automatic elog entry at the end of
> > each run and I've run into a problem. I've setup an elog on our server which
> > uses SSL and it seems that the melog provided by midas to create logbook entries
> > doesn't know any SSL.
> > 
> > My solution to this was to copy the crypt.c from the elog package to the
> > computer running midas and changed melog.c and the makefile to use SSL if a flag
> > -s is used. Does this seem like a sensible solution or did I oversee the obvious
> > and/or right way to do this?
> 
> Indeed melog.c is an old version of the elog.c utility in the elog package, which has not been maintained since a 
> long time. Can't you just use the recent elog.c utility from the elog package?

Well, that's essentially what I did, I just didn't want to install the whole elog package on the midas server. Whether
the utility is called elog or melog doesn't really matter. I just wanted to make sure that this is the right way to do
it. 

Thanks!

I wrote a c++ frontend to read data from CAEN VX1730 digitizers which is used in
parallel with the GRIFFIN frontend to read out DESCANT.

After a long overnight run to check that the frontend runs smoothly for a longer
time, I stopped the run and the frontend was killed by midas. I am not sure why
this happened, as the end_of_run function returned successfully (at least the
print statement right before "return SUCCESS;" appeared right away). So
something else must have timed-out and caused it to be killed, I guess?

Any suggestions on where to look to find out what causes this?

Thanks in advance for your help!

> run the frontend inside gdb and post the stack trace after the crash?
> 
> if there is no crash (the program is stopped by exit()), you may need
> to set a breakpoint in exit() or _exit() (not sure what it's latest name is)
> then with luck your stack trace will show who/what called it from where.
> 

If I remember correctly from the last time I tried that, it doesn't use the exit
function but gdb just reports that the program was terminated and no longer exists. I
can't set a breakpoint on SIGKILL as the point of SIGKILL is to kill the program and
gdb can't set a break at that point afaik.

> > > run the frontend inside gdb and post the stack trace after the crash?
> > > 
> > > if there is no crash (the program is stopped by exit()), you may need
> > > to set a breakpoint in exit() or _exit() (not sure what it's latest name is)
> > > then with luck your stack trace will show who/what called it from where.
> > > 
> > 
> > If I remember correctly from the last time I tried that, it doesn't use the exit
> > function but gdb just reports that the program was terminated and no longer exists. I
> > can't set a breakpoint on SIGKILL as the point of SIGKILL is to kill the program and
> > gdb can't set a break at that point afaik.
> 
> For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack 
> trace. Is this what you see?

Yes, that is exactly what I remember seeing.

> 
> If your program stops "normally", not from receiving some signal, set breakpoints on "exit" and 
> "_exit".
> 
> The normal stop sequence is to call exit(), which runs all the atexit() functions (the midas atexit() 
> function prints the message about "cm_disconnect_experiment not called at end of program") and 
> calls _exit() to stop the program.
> 
> So if you see the midas message "cm_disconnect_experiment not called at end of program", it is a 
> good indication that somebody (not mfe.c) called exit() on you. A breakpoint on "exit" should catch 
> who does it.
> 
> Good luck,
> K.O.

So far I haven't seen the issue with the message "cm_disconnect_experiment not called at end of program"
again. Now I just have to restart the frontend after the run has (failed?) to stop. After restarting the
frontend everything seems to work again. 

I haven't been writing data while doing these tests, so I can't say if there is any data missing or if the
runs were actually stopped properly (with a second dump of the ODB at the end).

> > > 
> > > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack 
> > > trace. Is this what you see?
> > 
> > Yes, that is exactly what I remember seeing.
> > 
> 
> Where would a SIGKILL come from?!?
> 
> Look in the syslog (/var/log/messages). If the program was killed by the linux kernel, it would be logged there,
> the usual cause is the machine runs out of memory and programs are killed by the OOM killer, this is logged
> into the syslog, always.
> 
> MIDAS also can issue a SIGKILL sometimes, again this is always logged in midas.log. see src/midas.c, search for SIGKILL to see 
> the exact messages printed before it is sent out.
> 
> K.O.

I haven't been able to reproduce the error from the overnight run so far. I will try and leave this running in gdb overnight to see
if I can get that error again.