 04 Aug 2023, Konstantin Olchanski, Forum, Issues with Universe II Driver
|
> I can compile 32 bit midas. Unless I am interpreting the linking error, I don't
> think I can use the driver as built.
|
 16 Dec 2020, Isaac Labrie Boulay, Forum, Issues building banks.
|
Hi all,
I'm currently trying to build events through doing block transfers. The worry was
|
|
16 Dec 2020, Konstantin Olchanski, Forum, Issues building banks.
|
> I'm currently trying to build events through doing block transfers.
I am confused by your question. I assume you read a CAEN V792 ADC, but I do not know what VME master you
|
|
16 Dec 2020, Isaac Labrie Boulay, Forum, Issues building banks.
|
Thanks for the quick reply,
> > I'm currently trying to build events through doing block transfers.
|
|
16 Dec 2020, Konstantin Olchanski, Forum, Issues building banks.
|
> > > I'm currently trying to build events through doing block transfers.
> >
> > I am confused by your question. I assume you read a CAEN V792 ADC, but I do not know what VME master you
|
|
16 Dec 2020, Isaac Labrie Boulay, Forum, Issues building banks.
|
> > > > I'm currently trying to build events through doing block transfers.
> > >
> > > I am confused by your question. I assume you read a CAEN V792 ADC, but I do not know what VME master you
|
|
16 Dec 2020, Stefan Ritt, Forum, Issues building banks.
|
> This is very hard to do using the mfe.c frontend. (the main reason I wrote the TMFE C++ frontend class).
Actually that's not true. Just look at
|
|
16 Dec 2020, Isaac Labrie Boulay, Forum, Issues building banks.
|
> > This is very hard to do using the mfe.c frontend. (the main reason I wrote the TMFE C++ frontend class).
>
> Actually that's not true. Just look at
|
14 Nov 2024, Mann Gandhi, Suggestion, Issue with creating banks 
|
Hello, I am a coop student working at SNOLAB. I am currently setting up a frontend
program to collect data for an experiment I am currently having with my bank being
initialized correctly with the correct name. I will attach an image of the error and
|
|
14 Nov 2024, Stefan Ritt, Suggestion, Issue with creating banks
|
All I can see is that your bank header gets corrupted along the way. The funny character reported by
cm_write_event_to_odb indicates that your original name "RPD0" got overwritten somewhere, but I could not spot any
mistake in your code.
|
|
14 Nov 2024, Mann Gandhi, Suggestion, Issue with creating banks
|
> All I can see is that your bank header gets corrupted along the way. The funny character reported by
> cm_write_event_to_odb indicates that your original name "RPD0" got overwritten somewhere, but I could not spot any
> mistake in your code.
|
|
15 Nov 2024, Konstantin Olchanski, Suggestion, Issue with creating banks
|
> Hello, I am a coop student working at SNOLAB.
> void* data_acquisition_thread(void* param)
> {
|
|
09 Nov 2021, Francesco Renga, Forum, Issue in data writing speed
|
Dear all,
I've a frontend writing a quite big bunch of data into a MIDAS bank (16bit output from a 4MP photo camera).
I'm experiencing a writing speed problem that I don't understand. When the photo camera is triggered at a low rate (< 2 Hz)
|
|
10 Nov 2021, Stefan Ritt, Forum, Issue in data writing speed
|
Midas uses various buffers (in the frontend, at the server side before the SYSTEM buffer, the SYSTEM buffer itself, on the
logger before writing to disk. All these buffers are in RAM and have fast access, so you can fill them pretty quickly. When
they are full, the logger writes to disk, which is slower. So I believe at 2 Hz your disk can keep up with your writing
|
|
26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed
|
Francesco, when you say "writing an event is slow", do you mean it in the frontend
or in the output data file?
|
|
26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed
|
> Francesco, when you say "writing an event is slow", do you mean it in the frontend
> or in the output data file?
|
|
24 Nov 2020, Isaac Labrie Boulay, Forum, Invalid name "Analyzer/Tests"
|
Hi everyone,
I've recently took the analyzer template from $MIDASSYS/examples/experiment and
|
|
27 Nov 2020, Konstantin Olchanski, Forum, Invalid name "Analyzer/Tests"
|
> I've recently took the analyzer template from $MIDASSYS/examples/experiment and
> modified it to be able to use Roody on a very simple frontend setup.
|
|
27 Nov 2020, Konstantin Olchanski, Forum, Invalid name "Analyzer/Tests"
|
https://bitbucket.org/tmidas/midas/issues/298/invalid-odb-names-in-example-midas
K.O. |
|
07 Dec 2020, Isaac Labrie Boulay, Forum, Invalid name "Analyzer/Tests"
|
> https://bitbucket.org/tmidas/midas/issues/298/invalid-odb-names-in-example-midas
> K.O.
|