ID![down down](down.png) |
Date |
Author |
Topic |
Subject |
108
|
01 Nov 2003 |
Stefan Ritt | | more odb | > I added error checking to the places where we read "/runinfo/run number". In
> general, I do this:
> Affected files:
> src/lazylogger.c
> src/odbedit.c
> src/mlogger.c
> src/mfe.c
> src/odb.c
> src/mana.c
> src/midas.c
> src/mhttpd.c
Now YOU broke the system by editing all these files with something I consider
temporary debugging code. A run number of zero is *VALILD*. If I want to make
sure a new experiment starts with run number #1, I put a run number of 0 into
the ODB. So on the first start the number is incremented by one which results
in run number from one. So please remove those checks which prevents me of
doing that. Again, your "run number zero" problem is soemhow specific to your
environment, and I would not put all these tests into the distribution,
because this can have side effects, like that one I described above.
- Stefan |
107
|
31 Oct 2003 |
Konstantin Olchanski | | more odb "run number" error checking | I added error checking to the places where we read "/runinfo/run number". In
general, I do this:
status = db_get_value("/runinfo/run number",&run_number);
assert(status==SUCCESS);
assert(run_number >= 0); (and run_number>0, where appropriate)
Here is the rationale: if we cannot read the run number, something must be
very terribly wrong. I cannot think of any recovery action other than
abort() and make a core dump for our debugging enjoyment.
I considered and rejected adding a "retry" loop: if we allow db_get_value()
to intermittently fail, then it's every use has to be wrapped in a retry
loop, which then should be inside db_get_value(), making it pointless to
have external "retry" loops.
I am now pondering on proposing a "db_get_value_cannot_possibly_fail()"
function (it would abort(), exit() with an error or commit harakiri if it
can't get the value). They way most db_xxx() functions are used in midas,
maybe they should be made "void" and "unfailible", with "STATUS
db_xxx_yes_I_can_fail_and_return_an_error_code()" evil twins. I guess this
is why "they" invented C/C++ exceptions. Anyway, something to think about.
Affected files:
src/lazylogger.c
src/odbedit.c
src/mlogger.c
src/mfe.c
src/odb.c
src/mana.c
src/midas.c
src/mhttpd.c
K.O. |
106
|
17 Nov 2003 |
Pierre-André Amaudruz | | Lazylogger application | - Remove temporary "/Programs/Lazy" creation.
- Fix Rate calculation for Web display.
- Change FTP channel description (see help). |
105
|
20 Nov 2003 |
Stefan Ritt | | Phantom | I tried to reproduce the problem, but without success. So in case this happens
again, one should debug the code im cm_watchdog() next to the line
/* decrement notify_count for open records and clear exclusive mode */
...
So if a killed client is removed from the ODB via the watchdog (or a "cleanup"
is done in ODBEdit), the notify_count should be decreased and thus the "open
records" should be closed. |
104
|
16 Nov 2003 |
Stefan Ritt | | Phantom | I have seen the same behaviour and it annoys me, too. What I did in the past
is a "cleanup" in ODBEdit which removes these open records. I have soem code
in cm_watchdog(), which should take care of that. If a client is dead, it
gets removed from the ODB, and its open records should get its notify_count
decremented. So obviously this code has some bug. I plan to do in the
following week (now I got some spare time) the following:
- exchange most db_create_record() by something better. Maybe
db_check_record(..., correct_flag), which creates the record only if it does
not exist at all, otherwise checks the structure. If correct_flag is TRUE, it
corrects the strucure (by calling db_create_record()), if it's false it just
returns an error code. This way one can decide from case to case which option
is better. Like for the /Runinfo, the flag would be FALSE, maybe with a
notification that the /Runinfo is different from the compiled-in structure,
and one hast to recompile the application.
- revisit the open record issue from dying frontends. I remember vaguely that
I tried to kill a frontend (kill -9), wait until the watchdog cleans up its
entries, and it worked fine. So it's more the problem to reproduce the issue
described in the previous elog entry. |
103
|
15 Nov 2003 |
Konstantin Olchanski | | Phantom "open records" | Sometimes (maybe after a client uncleanly exits?), I see phantom "open
records", for example:
[local:twist:Running]Gas>sor
/Equipment/Gas/Common open 2 times by fe1hp
/Equipment/Gas/Variables open 1 times by Logger
/Equipment/Gas/Variables/Flow1 open 2 times by uBeamTcl1 uBeamTcl
/Equipment/Gas/Settings/Command open 2 times by fe1hp
/Equipment/Gas/Statistics open 1 times by
Note the blank client name in the "/Equipment/Gas/Statistics" line.
This causes these warnings from mfe.c:
Cannot init equipment record, probably other FE is using it
Cannot delete statistics record, error 320
Cannot create statistics record, error 320
Cannot open statistics record, error 318. Probably other FE is using it
Then the number of generated events for this front end is never incremented.
Also attempts to delete this "open" record fail:
[local:twist:Running]Gas>del /Equipment/Gas/Statistics
Are you sure to delete the key
"/Equipment/Gas/Statistics"
and all its subkeys? (y/[n]) y
key is open by other client
How do I go about writing the db_validate_xxx() code to cleanup this
bogosity? I am not too familiar with the implementation of "open record"...
K.O. |
102
|
20 Nov 2003 |
Stefan Ritt | | set-uid-root midas programs | > dio- is required to be setuid-root to gain I/O permissions. I looked at it a
> few times, and it is probably safe, but I would like to get a second
> opinion. Stephan, can you should it to your local security geeks?
>
> mhttpd- definitely unsafe. It has more buffer overflows than I can shake a
> stick at. Why is it suid-root anyway?
>
> webpaw- what is it?!?
dio was written by Pierre.
mhttpd and webpaw both are web servers. webpaw is used to display PAW
pictures over the web. If you run these programs at a port <1024, and most
people do run them at port 80 (at least at PSI), they need to be setuid-root.
Unless you know a better way to do that... |
101
|
20 Nov 2003 |
Konstantin Olchanski | | set-uid-root midas programs | I see that MIDAS installs several set-uid-root programs into /usr/local/bin.
In this age and time of evil computer hackers, this is not a good idea and
we should Do Something (TM) about it. Here is my risk assessment:
[olchansk@midtis06 midas]$ ls -l /usr/local/bin | grep wsr
-rwsr-sr-x 1 root root 25811 Nov 20 09:27 dio
-rwsr-sr-x 1 root root 344553 Nov 20 09:27 mhttpd
-rwsr-sr-x 1 root root 70736 Nov 20 09:27 webpaw
dio- is required to be setuid-root to gain I/O permissions. I looked at it a
few times, and it is probably safe, but I would like to get a second
opinion. Stephan, can you should it to your local security geeks?
mhttpd- definitely unsafe. It has more buffer overflows than I can shake a
stick at. Why is it suid-root anyway?
webpaw- what is it?!?
K.O. |
100
|
21 Nov 2003 |
Stefan Ritt | | Revised MVMESTD | Thanks for your contribution. Let me try to map your functionality to mvmestd calls:
> A) The VMIC vme_slave_xxx() options are not considered.
We could maybe do that through mvme_mmap(SLAVE, ...) instead of mvme_mmap(MASTER, ...)
> B) The interrupt handling can certainly match the 4 entries required in the user frontend
> code i.e. Attach, Detach, Enable, Disable.
vmve_ioctl(VME_IOCTL_INTR_ATTACHE/DETACH/ENABLE/DISABLE, func())
> I don't understand your argument that the handle should be hidden. In case of multiple
> interfaces, how do you refer to a particular one if not specified?
> The following scheme does require a handle for refering to the proper (device AND window).
Four reasons for that:
1) For the SBS/Bit3, you need a handle for each address mode. So if I have two crates (and I do in our
current experiment), and have to access modules in A16, A24 and A32 mode, I need in total 6 handles.
Sometimes I mix them up by mistake, and wonder why I get bus errors.
2) Most installations will only have single crates (as your VMIC). So if there is only one crate, why
bother with a handle? If you have hunderds of accesses in your code, you save some redundant typing work.
3) A handle is usually kept global, which is considered not good coding style.
4) Our MCSTD and MFBSTD functions also do not use a handle, so people used to those libraries will find it
more natural not to use one.
> 1 ) deviceHandle = vme_init(int devNumber);
> Even though the VMIC doesn't deal with multiple devices,
> the SIS/PCI does and needs to init on a specific PCI card.
> Internally:
> opening of the device (/dev/sisxxxx_1) (ignored in case of VMIC).
> Possible including a mapping to a default VME region of default size with default AM
> (VMIC :16MB, A24). This way in a single call you get a valid handle for full VME access
> in A24 mode. Needs to be elaborate this option. But in principle you need to declare the
> VME region that you want to work on (vme_map).
Just vme_init(); (like fb_init()).
This function takes the first device, opens it, and stores the handle internally. Sets the AM to a default
value, and creates a mapping table which is initially empty or mapped to a default VME region. If one wants
to access a secondary crate, one does a vme_ioctl(VME_IOCTL_CRATE_SET, 2), which opens the secondary crate,
and stores the new handle in the internal table if applicable.
> 2) mapHandle = vme_map(int deviceHandle, int vmeAddress, int am, int size);
> Return a mapHandle specific to a device and window. The am has to be specified.
> What ever are the operation to get there, the mapHandle is a reference to thas setting.
> It could just fill a map structure.
> Internally:
> WindowHandle[deviceHandle] = vme_master_create(BusHandle[deviceHandle], ...
> WindowPtr[WindowHandle] = vme_master_window(BusHandle[deviceHandle]
> , WindowHandle[deviceHandle]...
The best would be if a mvme_read(...) to an unmapped region would automatically (internally) trigger a
vme_map() call, and store the WindowHandle and WindowPtr internally. The advantage of this is that code
written for the SIS for example (which does not require this kind of mapping) would work without change
under the VMIC. The disadvantage is that for each mvme_read(), the code has to scan the internal mapping
table to find the proper window handle. Now I don't know how much overhead this would be, but I guess a
single for() loop over a couple of entries in the mapping table is still faster than a microsecond or so,
thus making it negligible in a block transfer.
> 3) vme_setmode(mapHandle, const int DATA_SIZE, const int AM
> , const BOOL ENA_DMA, const BOOL ENA_FIFO);
> Mainly used for the vme_block_read/write. Define for following read the data size and
> am in case of DMA (could use orther DMA mode than window definition for optimal
> transfer).
>
> Predefine the mode of access:
> DATA_SIZE : D8, D16, D32
> AM : A16, A24, A32, etc...
> enaDMA : optional if available.
> enaFIFO : optional for block read for autoincrement source pointer.
>
> Remark:
> PAA- I can imagine this function to be a vme_ioctl (int mapHandle, int *param)
> such that extension of functionality is possible. But by passing cons int
> arguments, the optimizer is able to substitute and reduce the internal code.
Right. mvme_ioctl(VME_IOCTL_AMOD_SET/DSIZE_SET/DMA_SET/AUTO_INCR_SET, ...)
> uint_8Value = vme_readD8 (int mapHandle, uint_64 vmeSrceOffset)
> uint_16Value = vme_readD16 (int mapHandle, uint_64 vmeSrceOffset)
> uint_32Value = vme_readD32 (int mapHandle, uint_64 vmeSrceOffset)
> Single VME read access. In the VMIC case, this access is always through mapping.
> Value = *(WindowPtr[WindowHandle] + vmeSrceOffset)
> or
> Value = *(WindowStruct->WindowPtr[WindowHandle] + vmeSrceOffset)
mvme_read(*dst, DWORD vme_addr, DWORD size); would cover this in a single call. Note that the SIS for
example does not have memory mapping, so if one consistently uses mvme_read(), it will work on both
architectures. Again, this takes some overhead. Consider for example a possible VMIC implementation
mvme_read(char *dst, DWORD vme_addr, DWORD size)
{
for (i=0 ; table[i].valid ; i++)
{
if (table[i].start >= vme_addr && table[i].end < vme_addr+size)
break;
}
if (!table[i].valid)
{
vme_master_crate(...)
table[i].window_handle = vme_master_window(...)
}
if (size == 2)
mvme_ioctl(VME_IOCTL_DSIZE_SET, D16);
else if (size == 1)
mvme_ioctl(VME_IOCTL_DSIZE_SET, D8);
memcpy(dst, table[i].window_handle + vme_addr - table[i].start, size);
}
Note this is only some rough code, would need more checking etc. But you see that for each access the for()
loop has to be evaluated. Now I know that for the SBS/Bit3 and for the SIS a single VME access takes
~0.5us. So the for() loop could be much faster than that. But one has to try. If one experiment needs the
ultimate speed, it can use the native VMIC API, but then looses the portability. I'm not sure if one needs
the automatic DSIZE_SET, maybe it works without.
> status = vme_writeD8 (int mapHandle, uint_64 vmeSrceOffset, uint_8 Value)
> status = vme_writeD16 (int mapHandle, uint_64 vmeSrceOffset, uint_16 Value)
> status = vme_writeD32 (int mapHandle, uint_64 vmeSrceOffset, uint_32 Value)
> Single VME write access.
Dito. mvme_write(void *dst, DWORD vme_addr, DWORD size);
> nBytes = vme_block_read(mapHandle, char * pDest, uint_64 vmeSrceOffset, int size);
> Multiple read access. Can be done through standard do loop or DMA if available.
> nBytes < 0 : error
> Incremented pDest = (pDest + nBytes); Don't need to pass **pDest for autoincrement.
vmve_ioctl(VME_IOCTL_DMA_SET, TRUE);
n = mvme_read(char *pDest, DWORD vmd_addr, DWORD size);
> nBytes = vme_block_write(mapHandle, uint_64 vmeSrceOffset, char *pSrce, int size);
> Multiple write access.
> nBytes < 0 : error
> Incremented pSrce = (pSrce + nBytes); Don't need to pass **pSrce for autoincrement.
Dito.
> 8) status = vme_unmap(int mapHandle)
> Cleanup internal pointers or structure of given mapHandle only.
mvme_unmap(DWORD vme_addr, DWORD size)
Scan through internal table to find handle, then calls vme_unmap(mapHandle);
> 9) status = vme_exit()
> Cleanup deviceHandle and release device.
mvme_exit();
Let me know if this all makes sense to you...
- Stefan |
99
|
20 Nov 2003 |
Pierre-André Amaudruz, Konstantin Olchanski | | Revised MVMESTD | Before we try to merge the different access scheme for the different VME hardware,
we present the "optimal" configuration for the VMIC setup. This is a first shot so take it
with caution.
From these definitions, we should be able to workout a compromise and come up with
a satisfactory standard.
A) The VMIC vme_slave_xxx() options are not considered.
B) The interrupt handling can certainly match the 4 entries required in the user frontend
code i.e. Attach, Detach, Enable, Disable.
I don't understand your argument that the handle should be hidden. In case of multiple
interfaces, how do you refer to a particular one if not specified?
The following scheme does require a handle for refering to the proper (device AND window).
1 ) deviceHandle = vme_init(int devNumber);
Even though the VMIC doesn't deal with multiple devices,
the SIS/PCI does and needs to init on a specific PCI card.
Internally:
opening of the device (/dev/sisxxxx_1) (ignored in case of VMIC).
Possible including a mapping to a default VME region of default size with default AM
(VMIC :16MB, A24). This way in a single call you get a valid handle for full VME access
in A24 mode. Needs to be elaborate this option. But in principle you need to declare the
VME region that you want to work on (vme_map).
2) mapHandle = vme_map(int deviceHandle, int vmeAddress, int am, int size);
Return a mapHandle specific to a device and window. The am has to be specified.
What ever are the operation to get there, the mapHandle is a reference to thas setting.
It could just fill a map structure.
Internally:
WindowHandle[deviceHandle] = vme_master_create(BusHandle[deviceHandle], ...
WindowPtr[WindowHandle] = vme_master_window(BusHandle[deviceHandle]
, WindowHandle[deviceHandle]...
3) vme_setmode(mapHandle, const int DATA_SIZE, const int AM
, const BOOL ENA_DMA, const BOOL ENA_FIFO);
Mainly used for the vme_block_read/write. Define for following read the data size and
am in case of DMA (could use orther DMA mode than window definition for optimal
transfer).
Predefine the mode of access:
DATA_SIZE : D8, D16, D32
AM : A16, A24, A32, etc...
enaDMA : optional if available.
enaFIFO : optional for block read for autoincrement source pointer.
Remark:
PAA- I can imagine this function to be a vme_ioctl (int mapHandle, int *param)
such that extension of functionality is possible. But by passing cons int
arguments, the optimizer is able to substitute and reduce the internal code.
4)
uint_8Value = vme_readD8 (int mapHandle, uint_64 vmeSrceOffset)
uint_16Value = vme_readD16 (int mapHandle, uint_64 vmeSrceOffset)
uint_32Value = vme_readD32 (int mapHandle, uint_64 vmeSrceOffset)
Single VME read access. In the VMIC case, this access is always through mapping.
Value = *(WindowPtr[WindowHandle] + vmeSrceOffset)
or
Value = *(WindowStruct->WindowPtr[WindowHandle] + vmeSrceOffset)
5)
status = vme_writeD8 (int mapHandle, uint_64 vmeSrceOffset, uint_8 Value)
status = vme_writeD16 (int mapHandle, uint_64 vmeSrceOffset, uint_16 Value)
status = vme_writeD32 (int mapHandle, uint_64 vmeSrceOffset, uint_32 Value)
Single VME write access.
6)
nBytes = vme_block_read(mapHandle, char * pDest, uint_64 vmeSrceOffset, int size);
Multiple read access. Can be done through standard do loop or DMA if available.
nBytes < 0 : error
Incremented pDest = (pDest + nBytes); Don't need to pass **pDest for autoincrement.
7)
nBytes = vme_block_write(mapHandle, uint_64 vmeSrceOffset, char *pSrce, int size);
Multiple write access.
nBytes < 0 : error
Incremented pSrce = (pSrce + nBytes); Don't need to pass **pSrce for autoincrement.
8) status = vme_unmap(int mapHandle)
Cleanup internal pointers or structure of given mapHandle only.
9) status = vme_exit()
Cleanup deviceHandle and release device. |
98
|
17 Nov 2003 |
Stefan Ritt | | Revised MVMESTD | Let me propose a revised scheme for midas standard VME calls (mvmestd.h).
Pierre mentioned some limitations before, and I find now also some fields
to improve. Right now, the vme_open() call retrieves a handle. For some
interfaces (like SBS/Bit3), one has to obtain separate handles for
different addressing modes A24D32/A32D32 and so on, which I find a bit
troublesome. I would rather keep the handle internally, invisible to the
user, and use ioctl() statments to change the address/data mode.
So the API could look like:
vme_open() Deprecated, will be removed
vme_init(void) Standard initialization, open device(s), stores handles
internally in a table
vme_exit(void) Deallocates any memory, close handles
vme_read(void *dst, DWORD vme_addr, DWORD size)
vme_write(void *src, DWORD vme_addr, DWORD size)
vme_ioctl(int request, int *param)
Request is one of
VME_IOCTL_CRATE_SET/GET
Sets VME crate (in case several interfaces are
plugged into singlePC, meaningless for embedded CPUs)
VME_IOCTL_DEST_SET/GET
VME_BUS/VME_RAM/VME_LM for VME bus, RAM in VME
interface, or LM for local memory (used in Bit3
interface)
VME_IOCTL_AMOD_SET/GET
Sets/Retrieves VME AMOD (= VME_AMOD_xxx as currently
defined in mvmestd.h)
VME_IOCTL_DSIZE_SET/GET
Sets/Retrieves VME data size (D8/D16/D32/D64)
VME_IOCTL_DMA_SET/GET
Enable/Disable DMA, should be independent of AMOD
VME_IOCTL_INTR_ATTACH/DETACH/ENABLE/DISABLE
Set VME interrupts
VME_IOCTL_AUTO_INCR_SET/GET
Set autoincremet of source pointer, can be disabled
for FIFO readout
vme_mmap(void **ptr, DWORD vme_addr, DWORD size)
vme_unmap(void *ptr, DWORD size)
Map/Unmap VME to local memory
vme_read2(void *dst, DWORD vme_addr, DWORD size, DWORD flags)
vme_write2(void *src, DWORD vme_addr, DWORD size, DWORD flags)
With these functions one can directly specify the flags
usually managed by vme_ioctl(). Usefule for applications
where the address modifier for example has to be
different in each read/write operation.
Note that the vme_read/write functions do not have a VME handle any more,
nor an address modifier. This is all accomplished with vme_ioctl() calls.
Please have a look at this proposal, compare it with what you do currently
in VME, and let me know if we should add/modify something. I volunteer to
implement the API for the SBS/Bit3 617 and the Struck SIS1100/3100
interfaces, for VxWorks somebody at TRIUMF should take care. |
97
|
24 Nov 2003 |
Stefan Ritt | | cannot shutdown defunct clients | > But there is one problem with "cleanup". It has a hardwired timeout of
> 2 seconds. This is a problem for tasks like lazylogger which set a timeout
> of 60 seconds when moving the tape. So BEWARE, if you issue the "cleanup"
> command, it might kill some clients who have setup their timeout to longer
> than 2 seconds.
>
> I have asked Stefan to change this before. He said that, to be effective,
> the timeout value used for "cleanup" has to be rather short.
> One possibility, would be to allow for a user entered "cleanup" timeout.
> The default could stay at 2 seconds.
I changed the behaviour of cleanup by adding an extra parameter
ignore_timeout to cm_cleanup(). Now, in ODBEdit, a "clanup" obeys the
timeout set by the clients. The problem with that is if the logger crashes
for example, and it's timeout is set o 5 min., it cannot be clean-up'ed any
more for the next five minutes, and therefor not be restarted wasting
precious beam time. That's why I hard-wired originally the "cleanup" timout
to 2 sec. Now I added a flag "-f" to the ODBEdit cleanup command which works
in the old fashion with a 2 sec. timeout. So a "cleanup" alone won't kill a
looger which currently rewinds a tape or so, but a "cleanup -f" does.
I also changed internal timeouts from INT to DWORD, which should fix the
problem Konstantin reported recently (re-starting an experiment after
several weeks). New changes are commited, but I only did basic tests. So
please try the new code and tell me if there is any problem.
- Stefan |
96
|
20 Nov 2003 |
Renee Poutissou | | cannot shutdown defunct clients | Indeed the ODB command "cleanup" really works. I have used it several
times with the TWIST DAQ and regularly with the BNMR/MUSR setups where
we have these stubborn clients (ie feepics) that do not want to shutdown
cleanly.
But there is one problem with "cleanup". It has a hardwired timeout of
2 seconds. This is a problem for tasks like lazylogger which set a timeout
of 60 seconds when moving the tape. So BEWARE, if you issue the "cleanup"
command, it might kill some clients who have setup their timeout to longer
than 2 seconds.
I have asked Stefan to change this before. He said that, to be effective,
the timeout value used for "cleanup" has to be rather short.
One possibility, would be to allow for a user entered "cleanup" timeout.
The default could stay at 2 seconds.
> > Have you tried a "cleanup" in ODBEdit?
>
> Nope. Will try next time...
> |
95
|
20 Nov 2003 |
Stefan Ritt | | cannot shutdown defunct clients | > INT == "int", wraparound in 1 month
> DWORD == "unsigned int", wraparound in 2 months
>
> should we make it the 64-bit "long long" (or C98's "int64_t")?
Won't work on all supported compilers. The point is that DWORD wraps around in
2 months, but the difference of two DWORDs is alywas positive, never negative
like you had it. We only have to distinguish if the difference of the current
time (im ms) minus the last_activity of a client is larget than the timeout,
typically 10 seconds or so. If you have a wraparound on 32-bit DWORD, the
difference is still ok. Like
current "time" : 0x0000 0100
last_activity: 0xFFFF FF00
then current_time - last_activity = 0x00000100 - 0xFFFFFF00 = 0x00000200 if
calculated with 32-bit values. |
94
|
20 Nov 2003 |
Konstantin Olchanski | | cannot shutdown defunct clients | > > 1) shutdown from mhttpd "programs" page -> "cannot shutdown client"
> Have you tried a "cleanup" in ODBEdit?
Nope. Will try next time...
> The "last_activity" is a 32-bit int, filled with milliseconds. So indeed it
> wraps around after about one month.... change last_activity
> from INT to DWORD. This way it's alway positive and the wraparound does not
> hurt.
INT == "int", wraparound in 1 month
DWORD == "unsigned int", wraparound in 2 months
should we make it the 64-bit "long long" (or C98's "int64_t")?
K.O. |
93
|
20 Nov 2003 |
Stefan Ritt | | cannot shutdown defunct clients | > 1) shutdown from mhttpd "programs" page -> "cannot shutdown client"
> 2) "sh mhttpd" from odbedit ->
> [midas.c:5298:cm_shutdown] cannot connect to client mhttpd on host
> midtig01.triumf.ca, port 32853
> Client mhttpd not active
> 3) in odbedit: "cd /system/clients; rm xxxx"
> refuses to delete the key
Have you tried a "cleanup" in ODBEdit?
The "last_activity" is a 32-bit int, filled with milliseconds. So indeed it
wraps around after about one month. So if a all clients are stopped
simultaneously the hard way (such that nobody's watchdog can clean any other
client from the ODB), like with a power off, and you start the thing one
month later, there might be a problem. I never tried that before. So next
time to a cleanup. If that does not help, we should change last_activity
from INT to DWORD. This way it's alway positive and the wraparound does not
hurt. |
92
|
20 Nov 2003 |
Konstantin Olchanski | | cannot shutdown defunct clients | > While reviving midas on midtig01 after it was not used for a while ...
> [local:tigress:S]/>scl -w
> Name Host Timeout Last called
> mhttpd midtig01.triumf.ca 10000 -2037131082
These clients cannot be deleted. I tried:
1) shutdown from mhttpd "programs" page -> "cannot shutdown client"
2) "sh mhttpd" from odbedit ->
[midas.c:5298:cm_shutdown] cannot connect to client mhttpd on host
midtig01.triumf.ca, port 32853
Client mhttpd not active
3) in odbedit: "cd /system/clients; rm xxxx"
refuses to delete the key
Lacking any better ideas, I deleted them via brain surgery on the odb file:
1) stop everything
2) ipcrm the SYSV shared memory segment
3) odbedit -> save xxx.odb
4) xemacs xxx.odb, delete offending odb entries
5) rm .ODB.SHM
6) odbedit -> load xxx.odb
7) voila, bad clients gone, gone, gone.
K.O. |
91
|
20 Nov 2003 |
Konstantin Olchanski | | midas timeout wraparound | While reviving midas on midtig01 after it was not used for a while, we see
this. Notice negative "last called" numbers. Looks like a time_t wraparound
somewhere...
[local:tigress:S]/>scl -w
Name Host Timeout Last called
mhttpd midtig01.triumf.ca 10000 -2037131082
Logger midtig01.triumf.ca 10000 -2037131166
Analyzer midtig01.triumf.ca 10000 -2037131048
JACQ midtig01.triumf.ca 10000 -2037131667
mhttpd1 midtig01.triumf.ca 10000 325
ODBEdit midtig01.triumf.ca 10000 829
K.O. |
90
|
30 Nov 2003 |
Stefan Ritt | | bad call to cm_cleanup() in fal.c | > fal.c does not compile: it calls cm_cleanup() with one argument when there
> should be two arguments. K.O.
Fixed and committed. |
89
|
30 Nov 2003 |
Konstantin Olchanski | | bad call to cm_cleanup() in fal.c | fal.c does not compile: it calls cm_cleanup() with one argument when there
should be two arguments. K.O. |
|