Since the column on the main midas status page with fraction of analyzed events is 
barely used, I decided to drop it. Anyhow it does not make sense for all slow 
control events. If this feature is required in some experiment, I propose to move it 
into a custom page and calculate this ratio in JavaScript, where one has much more 
flexibility. 

This modification frees up more space on the status page for the "Status" column, where 
front-end programs can report errors etc.

I notice that "mserver -s" (a non-default mode of operation) does not work right
- if I connect odbedit for the first time, all is okey, if I connect the second
time, mserver crashes - because after the first connection closed,
rpc_deregister_functions() was called, rpc_list is deleted and causes a crash
later on. Because everybody uses the default "mserver -m" mode, I am not sure
how important it is to fix this.
K.O.

> I notice that "mserver -s" (a non-default mode of operation) does not work right
> - if I connect odbedit for the first time, all is okey, if I connect the second
> time, mserver crashes - because after the first connection closed,
> rpc_deregister_functions() was called, rpc_list is deleted and causes a crash
> later on. Because everybody uses the default "mserver -m" mode, I am not sure
> how important it is to fix this.
> K.O.

"mserver -s" is there for historical reasons and for debugging. I started originally 
with a single process server back in the 90's, and only afterwards developed the multi 
process scheme. The single process server now only works for one connection and then 
crashes, as you described. But it can be used for debugging any server connection, 
since you don't have to follow the creation of a subprocess with your debugger, and 
therefore it's much easier. But after the first connection has been closed, you have 
to restart that single server process. Maybe one could add some warning about that, or 
even fix it, but it's nowhere used in production mode.

> 
> "mserver -s" is there for historical reasons and for debugging.
>

I confirm that my modification also works for "mserver -s". I also added an assert() to the
place in midas.c were it eventually crashes, to make it more obvious for the next guys.

K.O.

mserver update svn rev 4625 fixes an anomaly in the MIDAS RPC network code where
in some network configurations MIDAS mserver connections work, but some RPC
transactions, such as starting and stopping runs, do not (use the wrong network
names or are routed over the wrong network).

The problem is a possible discrepancy between network addresses used to
establish the mserver connection and the value of "/System/Clients/xxx/Host"
which is ultimately set to the value of "hostname" of the remote client. This
ODB setting is then used to establish additional network connections, for
example to start or stop runs.

Use the client "hostname" setting works well for standard configurations, when
there is only one network interface in the machine, with only one IP address,
and with "hostname" set to the value that this IP address resolves to using DNS.

However, if there are private networks, multiple network interfaces, or multiple
network routes between machines, "/System/Clients/xxx/Host" may become set to an
undesirable value resulting in asymmetrical network routing or complete failure
to establish RPC connections.

Svn rev 4625 updates mserver.c to automatically set "/System/clients/xxx/Host"
to the same network name as was used to establish the original mserver connection.

As always with networking, any fix always breaks something somewhere for
somebody, in which case the old behavior can be restored by "setenv
MIDAS_MSERVER_DO_NOT_USE_CALLBACK_ADDR 1" before starting mserver.

The specific problem fixed by this change is when the MIDAS client and server
are on machines connected by 2 separate networks ("client.triumf.ca" and
"client.daq"; "server.triumf.ca" and "server.daq"). The ".triumf.ca" network
carries the normal SSH, NFS, etc traffic, and the ".daq" network carries MIDAS
data traffic.

The client would use the "server.daq" name to connect to the server and this
traffic would go over the data network (good).

However, previously, the client "/System/Clients/xxx/Host" would be set to
"client.triumf.ca" and any reverse connections (i.e. RPC to start/stop runs)
would go over the normal ".triumf.ca" network (bad).

With this modification, mserver will set "/System/Clients/xxx/Host" to
"client.daq" (the IP address of the interface on the ".daq" network) and all
reverse connections would also go over the ".daq" network (good).

P.S. This modification definitely works only for the default "mserver -m" mode,
but I do not think this is a problem as using "-s" and "-t" modes is not
recommended, and the "-s" mode is definitely broken (see my previous message).

svn rev 4625
K.O.

By request from Renee, I increased the MIDAS BANKLIST_MAX from 64 to 1024 and
after fixing a few buglets where YB_BANKLIST_MAX is used instead of (now bigger)
BANKLIST_MAX, I can do a full dump of ND280 FGD events (96 banks).

I also noticed that "mdump -b BANK" did not work, it turns out that it could not
handle 32bit-banks at all. This is now fixed, too.

svn rev 4624
K.O.

We were debugging a strange problem in the event builder, where out of 14
fragments, two fragments were always getting serial number mismatches and the
serial numbers were not sequentially increasing (the other 12 fragments were
just fine).

Then we noticed in the event builder debug output that these 2 fragments were
getting assigned the same buffer handle number, despite having different names -
BUF09 and BUFTPC.

Then we looked at "ipcs", counted the buffers, and there are only 13 buffers for
14 frontends.

Aha, we went, maybe we have unlucky buffer names, renamed BUFTPC to BUFAAA and
everything started to work just fine.

It turns out that the MIDAS ss_shm_open() function uses "ftok" to convert buffer
names to SystemV shared memory keys. This "ftok" function promises to create
unique keys, but I guess, just not today.

Using a short test program, I confirmed that indeed we have unlucky buffer names
and ftok() returns duplicate keys, see below.

Apparently ftok() uses the low 16 bits of the file inode number, but in our
case, the files are NFS mounted and inode numbers are faked inside NFS. When I
run my test program on a different computer, I get non-duplicate keys. So I
guess we are double unlucky.

Test program:

#include <stdio.h>
#include <sys/types.h>
#include <sys/ipc.h>

int main(int argc, char* argv[])
{
  //key_t ftok(const char *pathname, int proj_id);
  
  int k1 = ftok("/home/t2kdaq/midas/nd280/backend/.BUF09.SHM", 'M');
  int k2 = ftok("/home/t2kdaq/midas/nd280/backend/.BUFTPC.SHM", 'M');
  int k3 = ftok("/home/t2kdaq/midas/nd280/backend/.BUFFGD.SHM", 'M');

  printf("key1: 0x%08x, key2: 0x%08x, key3: 0x%08x\n", k1, k2, k3);
  return 0;
}

[t2kfgd@t2knd280logger ~/xxx]$ g++ -o ftok -Wall ftok.cxx
[t2kfgd@t2knd280logger ~/xxx]$ ./ftok
key1: 0x4d138154, key2: 0x4d138154, key3: 0x4d138152

Also:

[t2kfgd@t2knd280logger ~/xxx]$ ls -li ...
14385492 -rw-r--r-- 1 t2kdaq t2kdaq  8405052 Nov 24 17:42
/home/t2kdaq/midas/nd280/backend/.BUF09.SHM
36077906 -rw-r--r-- 1 t2kdaq t2kdaq 67125308 Nov 26 10:19
/home/t2kdaq/midas/nd280/backend/.BUFFGD.SHM
36077908 -rw-r--r-- 1 t2kdaq t2kdaq  8405052 Nov 25 15:53
/home/t2kdaq/midas/nd280/backend/.BUFTPC.SHM

(hint: print the inode numbers in hex and compare to shm keys printed by the
program)

K.O.

Please be aware of mlogger.c update rev 4566 on Sept 23rd 2009, when Stefan
fixed a buglet in the subrun file size computations. Before this fix, the first
subrun could be of a short length. If you use subruns, please update your
mlogger to at least rev 4566 (or newer, Stefan added the run and subrun time
limits just recently).
K.O.

When using remote midas clients with mserver, you may have noticed the zero-size .RPC.SHM files 
these clients create in the directory where you run them. These files are associated with the semaphore 
created by the midas rpc layer (rpc_call) to synchronize rpc calls between multiple threads. This 
semaphore is always created, even for single-threaded midas applications. Also normally midas 
semaphore files are created in the midas experiment directory specified in exptab (same place as 
.ODB.SHM), but for remote clients, we do not know that location until we start making rpc calls, so the 
semaphore file is created in the current directory (and it is on a remote machine anyway, so this 
location may not be visible locally).

There are 2 problems with these semaphores:
1) in multiple experiments, we have observed the RPC.SHM semaphore stuck in a locked state, 
requiring manual cleanup (ipcrm -s xxx). So far, I have failed to duplicate this lockup using test 
programs and test experiments. The code appears to be coded correctly to automatically unlock the 
semaphore when the program exits or is killed.
2) RPC.SHM is created as a global shared semaphore so it synchronizes rpc calls not just for all threads 
inside one application, but across all threads in all applications (excessive locking - separate 
applications are connected to separate mservers and do not need this locking); but only for applications 
that run from the same current directory - RPC.SHM files in different directories are "connected" to 
different semaphores.

To try to fix this, I implemented "private semaphores" in system.c and made rpc_call() use them.

This introduced a major bug - a semaphore leak - quickly using up all sysv semaphores (see sysctl 
kernel.sem).

The code was now reverted back to using RPC.SHM as described above.

The "bad" svn revisions start with rev 4472, the problem is fixed in rev 4480.

If you use remote midas clients and have one of these bad revisions, either update midas.c to rev 4480 
or apply this patch to midas.c::rpc_call():
ss_mutex_create("", &_mutex_rpc);
should read
ss_mutex_create("RPC", &_mutex_rpc);

Apologies for any inconvenience caused by this problem
K.O.

> When using remote midas clients with mserver, you may have noticed the zero-size .RPC.SHM files 
> these clients create in the directory where you run them. These files are associated with the semaphore 
> created by the midas rpc layer (rpc_call) to synchronize rpc calls between multiple threads. This 
> semaphore is always created, even for single-threaded midas applications. Also normally midas 
> semaphore files are created in the midas experiment directory specified in exptab (same place as 
> .ODB.SHM), but for remote clients, we do not know that location until we start making rpc calls, so the 
> semaphore file is created in the current directory (and it is on a remote machine anyway, so this 
> location may not be visible locally).
> 
> There are 2 problems with these semaphores:

A 3rd problem surfaced - on SL5 Linux, the global limit is 128 or so semaphores and on at least one heavily used machine that hosts multiple 
experiments we simply run out of semaphores.

For "normal" semaphores, their number is fixed to about 5 per experiment (one for each shared memory buffer), but the number of RPC 
semaphores is not bounded by the number of experiments or even by the number of user accounts - they are created (and never deleted) for 
each experiment, for each user that connects to each experiment, for each subdirectory where the each user happened to try to start a 
program that connects to the each experiment. (to reuse the old children's rhyme).

Right now, MIDAS does not have an abstraction for "local multi-thread mutex" (i.e. pthread_mutex & co) and mostly uses global semaphores 
for this task (with interesting coding results, i.e. for multithreaded locking of ODB). Perhaps such an abstraction should be introduced?

K.O.

> Right now, MIDAS does not have an abstraction for "local multi-thread mutex" (i.e. pthread_mutex & co) and mostly uses global semaphores 
> for this task (with interesting coding results, i.e. for multithreaded locking of ODB). Perhaps such an abstraction should be introduced?

Yes. In the old days when I designed the inter-process communication (~1993), there was no such thing like pthread_mutex (only under Windows). 
Now it would be time to implement this thing, since it then will work under Posix and Windows (don't know about VxWorks). But that will at least 
allow multi-threaded client applications, which can safely call midas functions through the RPC layer. For local thread-safeness, all midas 
functions have to be checked an modified if necessary, which is a major work right now, but for remote clients it's rather simple.

> When using remote midas clients with mserver, you may have noticed the zero-size .RPC.SHM files 
> these clients create in the directory where you run them.

Well, RPC.SHM bites. Please reread the parent message for full details, but in the nutshell, it is a global
semaphore that permits only one midas rpc client to talk to midas at a time (it was intended for local
locking between threads inside one midas application).

I have about 10 remote midas frontends started by ssh all in the same directory, so they all share the same
.RPC.SHM semaphore and do not live through the night - die from ODB timeouts because of RPC semaphore contention.

In a test version of MIDAS, I disabled the RPC.SHM semaphore, and now my clients live through the night, very
good.

Long term, we should fix this by using application-local mutexes (i.e. pthread_mutex, also works on MacOS, do
Windows have pthreads yet?).

This will also cleanup some of the ODB locking, which currently confuses pid's, tid's etc and is completely
broken on MacOS because some of these values are 64-bit and do not fit into the 32-bit data fields in MIDAS
shared memories.

Short term, I can add a flag for enabling and disabling the RPC semaphore from the user application: enabled
by default, but user can disable it if they do not use threads.

Alternatively, I can disable it by default, then enable it automatically if multiple threads are detected or
if ss_thread_create() is called.

Could also make it an environment variable.

Any preferences?

K.O.

odb.c rev 4622 fixes ODB corruption by db_connect_database() if client_name is
too long. Also fixed is potential ODB corruption by too long key names in
db_create_key(). Problem kindly reported by Tim Nichols of T2K/ND280 experiment.
K.O.

> odb.c rev 4622 fixes ODB corruption by db_connect_database() if client_name is
> too long. Also fixed is potential ODB corruption by too long key names in
> db_create_key(). Problem kindly reported by Tim Nichols of T2K/ND280 experiment.


Related bug fix - db_connect_database() should not permit client names that contain
the slash (/) character. Names like "aaa/bbb" create entries /Programs/aaa/bbb (aaa
is a subdirectory) and names like "../aaa" create entries in the ODB root directory.

svn rev 4623.
K.O.

I encountered many warning while building MIDAS (svn r4556). Please see the
attached log file. Most of them are caused by type conversion from string to
"char*".
Though I can ignore all the warning without any problem, I still hate to see
them. :-)

> I encountered many warning while building MIDAS (svn r4556). Please see the
> attached log file. Most of them are caused by type conversion from string to
> "char*".
> Though I can ignore all the warning without any problem, I still hate to see
> them. :-)

There is no "type conversions". The compiler is whining about code like this:

/* data type names */
static char *tid_name[] = {
   "NULL",
   "BYTE",
   ...

I guess we should keep the compiler happy and make them "static const char*".

BTW, my compiler is SL5.2 gcc-4.1.2 and it does not complain. What's your compiler?

K.O.

> There is no "type conversions". The compiler is whining about code like this:
> 
> /* data type names */
> static char *tid_name[] = {
>    "NULL",
>    "BYTE",
>    ...
> 
> I guess we should keep the compiler happy and make them "static const char*".
> 
> BTW, my compiler is SL5.2 gcc-4.1.2 and it does not complain. What's your compiler?
> 
> K.O.

Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.4-2' --with-
bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs --enable-
languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --enable-shared --enable-multiarch -
-enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-
gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.3 
--program-suffix=-4.3 --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc --
enable-mpfr --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --
host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.3.4 (Debian 4.3.4-2)

#define EXPCVADC_COMMON_STR(_name) char *_name[] = {\
"[.]",\
...

#define EXPCVADC_COMMON_STR(_name) const char *_name[] = {\
"[.]",\
...

char *s = "whatever";
...
strcpy(s, "Hello, this is a string longer than the initial one.");

status = db_create_record(hDB, 0, set_str, strcomb(expcvadc_settings_str));

cvadcfe.c: In function ‘frontend_init’:
cvadcfe.c:144: warning: passing argument 1 of ‘strcomb’ from incompatible pointer type

> #define EXPCVADC_COMMON_STR(_name) const char *_name[] = {\
> "[.]",\
>...

Ok, I changed that in odb.c rev. 4620, should be fine now.

I committed an updated lazylogger with updated documentation. The new version supports subruns and 
can save to external storage arbitrary files (i.e. odb dump files). It also moves most book keeping out of 
odb to permit handling more files on bigger storage disks.

Example lazylogger scripts for castor (CERN) and dcache (TRIUMF) are in the directory "utils".

The lazylogger documentation was updated to remove obsolete information and to describe the new 
functions. As usual "make dox; cd doxfiles/html; firefox index.html" or see my copy at:

http://ladd00.triumf.ca/~olchansk/midas/Utilities.html#lazylogger_task

svn rev 4615, 4616.
K.O.

Though ended with ".c", "lazylogger.c" has to be build with C++ compiler. I have 
to modify my CMakeLists.txt. 
Please see the attachment if you need it. It works with svn-r4616.

Hi,
I'm new to both Linux and Midas and having trouble installing the programme - 
the install file suggeats that I should have a directory:

midas/unix

but this doesn't appear.

Also, when running the "make" for the library (step 3 of the installation), I 
don't see the directory "zlib.a", but there is a "libz.a" and I note the 
original .tar file has no libz.a file in it. Is this a typo on the 
installation?
The terminal window at this point displays:

undefined reference to `errno'
make: ***[example] Error 1

Further help will no doubt be required as I've used windows throughout my 
research and now looking to learn how to use linux. Any help greatly 
appreciated. Thanks!

Documentation for writing midas history data to SQL (mysql) is now documented in midas doxygen files 
(make dox; firefox doxfiles/html/index.html). The corresponding logger and mhttpd code has been 
committed for some time now and it is used in production environment by the t2k/nd280 slow controls 
daq system at TRIUMF.

svn rev 4487
K.O.

> Documentation for writing midas history data to SQL (mysql) is now documented in midas doxygen files 
> (make dox; firefox doxfiles/html/index.html). The corresponding logger and mhttpd code has been 
> committed for some time now and it is used in production environment by the t2k/nd280 slow controls 
> daq system at TRIUMF.
> svn rev 4487


An updated version of the SQL history code is now committed to midas svn.

The new code is in history_sql.cxx. It implements a C++ interface to the MIDAS history (history.h),
and improves on the old code history_odbc.cxx by adding:
- an index table for remembering MIDAS names of SQL tables and columns (our midas users like to use funny characters in history 
names that are not permitted in SQL table and column names),
- caching of database schema (event names, etc) with a noticeable speedup of mhttpd (there is a new button on the history panel editor 
"clear history cache" to make mhttpd reload the database schema.

The updated documentation for using SQL history is committed to midas svn doxfiles/internal.dox (svn up; make dox; firefox 
doxfiles/html/index.html), or see my copy on the web at
http://ladd00.triumf.ca/~olchansk/midas/Internal.html#History_sql_internal

svn rev 4595
K.O.

$ grep -n "class SqlODBC" src/*
src/history_odbc.cxx:282:class SqlODBC: public SqlBase
src/history_sql.cxx:293:class SqlODBC: public SqlBase

Linking CXX shared library lib/libmidas.so
/usr/bin/cmake -E cmake_link_script CMakeFiles/midas-shared.dir/link.txt --verbose=1
/usr/bin/c++  -fPIC   -shared -Wl,-soname,libmidas.so -o lib/libmidas.so CMakeFiles/midas-shared.dir/src/ftplib.c.o CMakeFiles/midas-shared.dir/src/midas.c.o CMakeFiles/midas-shared.dir/src/system.c.o CMakeFiles/midas-shared.dir/src/mrpc.c.o CMakeFiles/midas-shared.dir/src/odb.c.o CMakeFiles/midas-shared.dir/src/ybos.c.o CMakeFiles/midas-shared.dir/src/history.c.o CMakeFiles/midas-shared.dir/src/alarm.c.o CMakeFiles/midas-shared.dir/src/elog.c.o CMakeFiles/midas-shared.dir/opt/DAQ/repos/bot/mxml/mxml.c.o CMakeFiles/midas-shared.dir/opt/DAQ/repos/bot/mxml/strlcpy.c.o CMakeFiles/midas-shared.dir/src/history_odbc.cxx.o CMakeFiles/midas-shared.dir/src/history_sql.cxx.o 
CMakeFiles/midas-shared.dir/src/history_sql.cxx.o: In function `SqlODBC':
/opt/DAQ/repos/bot/midas/src/history_sql.cxx:200: multiple definition of `SqlODBC::SqlODBC()'
CMakeFiles/midas-shared.dir/src/history_odbc.cxx.o:/opt/DAQ/repos/bot/midas/src/history_odbc.cxx:315: first defined here
...
history_odbc.cxx:727: first defined here
collect2: ld returned 1 exit status
make[2]: *** [lib/libmidas.so] Error 1

> Linking CXX shared library lib/libmidas.so
/usr/bin/c++  ... -o lib/libmidas.so ... CMakeFiles/midas-shared.dir/src/history_odbc.cxx.o 
CMakeFiles/midas-shared.dir/src/history_sql.cxx.o 
CMakeFiles/midas-shared.dir/src/history_sql.cxx.o: In function `SqlODBC':
/opt/DAQ/repos/bot/midas/src/history_sql.cxx:200: multiple definition of `SqlODBC::SqlODBC()'
CMakeFiles/midas-
shared.dir/src/history_odbc.cxx.o:/opt/DAQ/repos/bot/midas/src/history_odbc.cxx:315: first defined 
here
> Why is the class "SqlODBC" duplicated?

This is interesting. I do not think my C++ book spells it out that I cannot have class A in foo.cxx
and a class A in bar.cxx. In fact I already discovered that the two classes A will collide (duplicate default 
constructor A::A, even if all other member functions are different) if I link an executable that uses both 
foo.o and bar.o.

Is there a way around this problem? In C, I can declare functions and variables "static" to "hide" them
from the linker.

What is the C++ equivalent for classes? (Any C++ experts here?)

In this specific case, the file history_odbc.cxx will disappear with the next commit of mhttpd, hopefully 
today. mlogger and mh2sql already do not use it.

And I will commit the Makefile change renaming libmidas.so to libmidas-shared.so, so we can build it 
by default but still link midas core executables to the normal midas library.

This will catch such a problem if it happens again.

K.O.

> > Why is the class "SqlODBC" duplicated?
> 
> This is interesting. I do not think my C++ book spells it out that I cannot have class A in foo.cxx
> and a class A in bar.cxx.

I guess nobody knows the answer to this C++ puzzle. In any case history_odbc.cxx is not used anymore removing duplication of class SqlODBC.

svn rev 4594
K.O.

I have experienced a problem building MIDAS from the head of the SVN repository (rev 4458) when 
specifying the shared library flag. Whie the shared library appears to compile and link OK, the 
subsequent compilation of mserver fails as follows:

$ make ROOTSYS= NEED_SHLIB=1

<... snipped some lines ...>

ld -shared -o linux/lib/libmidas.so linux/lib/midas.o linux/lib/system.o linux/lib/mrpc.o 
linux/lib/odb.o linux/lib/ybos.o linux/lib/ftplib.o linux/lib/mxml.o linux/lib/history_midas.o 
linux/lib/history_sql.o linux/lib/history.o linux/lib/alarm.o linux/lib/elog.o linux/lib/strlcpy.o -lutil -
lpthread -lz -lc
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o linux/lib/mana.o 
src/mana.c
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o 
linux/lib/cnaf_callback.o src/cnaf_callback.c
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o linux/lib/mfe.o 
src/mfe.c
g++ -Dextname -DMANA_LITE -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -
Llinux/lib -DINCLUDE_FTPLIB   -D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-
unused-function -o linux/lib/fal.o src/fal.c
cc -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o 
linux/bin/mserver src/mserver.c -lmidas -Wl,-rpath,/usr/local/lib -lutil -lpthread -lz
/usr/bin/ld: linux/bin/mserver: hidden symbol `__dso_handle' in /usr/lib/gcc/x86_64-redhat-
linux/4.1.2/crtbegin.o is referenced by DSO
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: ld returned 1 exit status
make: *** [linux/bin/mserver] Error 1

Having googled the error, it appears to be solved by modifying the linker statement for the shared 
library in the Makefile at line 464 to use g++ rather than ld:

463c463
< 	ld -shared -o $@ $^ $(LIBS) -lc
---
> 	$(CXX) -shared -o $@ $^ $(LIBS) -lc

Presumably this is because g++ knows better how to link in the appropriate system libraries required 
for some of the recently added C++ code? 

This was on Scientific Linux SL5.2 x86_64, gcc version 4.1.2, glibc version 2.5-24.

Tim

> --- Makefile
> < 	ld -shared -o $@ $^ $(LIBS) -lc
> ---
> > 	$(CXX) -shared -o $@ $^ $(LIBS) -lc

Will do. We also have a long standing request to change shared library name from lidmidas.so to libmidas-shared.so.

Different name for the .so file will permit us to build the shared library by default, but still link all MIDAS executables
with the static libmidas.a.

(there is no benefit from linking MIDAS executables - mlogger, mhttpd, etc - with the shared library,
and there is a significant cost in confusion from version skew between the executables and shared
libraries - I have had enough midnight calls "why did odbedit stop working? Oh, who changed LD_LIBRARY_PATH
and why is it now binding against this obsolete libmidas.so left over from 2 years ago?").

For user applications you can do whatever, but for MIDAS core applications I strongly suggest that they
be linked to the midas static library.

K.O.

> > > 	$(CXX) -shared -o $@ $^ $(LIBS) -lc

Done.
MIDAS shared library renamed from libmidas.so to libmidas-shared.so and always build on Linux (.so) and MacOS (.dylib and .so bundle).

Users who wish to link their applications to the shared library should change their Makefile from "gcc ... -lmidas" to "gcc ... -lmidas-shared".

MIDAS core applications (mhttpd, mlogger, etc) are linked to the static library to permit multiple versions of midas to be used
at the same time (LD_LIBRARY_PATH should point to the shared library for *which* midas?!?), avoid problems with wrong setting
of LD_LIBRARY_PATH and to avoid problems with version skew (which we found unavoidable once a midas daq is used for a year or
more - main reason we gave up on using the midas shared library in the first place).

svn rev 4594
K.O.

Platform: Debian Linux testing
Compiler: gcc 4.3.4 (Debian 4.3.4-2)
Arch: x86
Description:
  The "g++" is whining while compiling history_midas.cxx. Please see the attached log file.
This can be fixed by add "#include <cstdlib>" to the C++ source. You know, different versions
of g++ don't act the same way. I think, maybe in version 4.2 or before, g++ can automatically
include the C header "stdlib.h" (which in C++ should be <cstdlib> because of some confusion
between C and C++), but not in version 4.3 or later. I tested g++-4.4, the problem still exists.
And g++-4.2 gives no error.

>  The "g++" is whining while compiling history_midas.cxx. Please see the attached log file.

Fixed. svn 4594. K.O.

The latest version of mfe.c has a problem where poll_event() is called before
frontend_init() and this causes a crash because in poll_event() we try to access
VME before it is initialized in frontend_init(). K.O.

> The latest version of mfe.c has a problem where poll_event() is called before
> frontend_init() and this causes a crash because in poll_event() we try to access
> VME before it is initialized in frontend_init(). K.O.

Oops, that sneaked in when doing the last modification to display the frontend status. 
I refactored register_equipment() so that frontend_init() gets called before 
poll_event().

$ odbedit -e expcvadc
odbedit: /opt/DAQ/repos/bot/midas/src/odb.c:651: db_validate_sizes: Assertion `sizeof(EQUIPMENT_INFO) == 400' failed.
zsh: abort      odbedit -e expcvadc

-----------------------------------------------------------------------
r4568 | olchanski | 2009-09-27 23:56:39 +0800 (日, 27  9月 2009) | 5 lines

mhttpd: compile using the C++ compiler.
mhttpd: fix wrong initialization of /History/ODBC_DSN
odb.c: size of EQUIPMENT_INFO has changed.
Makefile: use "-O2" compiler flag instead of "-O3" - to fix SL5 gcc crash (ICE) 

Linking CXX executable bin/mh2sql
CMakeFiles/mh2sql.dir/utils/mh2sql.cxx.o: In function `main':
/opt/DAQ/repos/bot/midas/utils/mh2sql.cxx:150: undefined reference to `MakeMidasHistoryODBC()'

> Linking CXX executable bin/mh2sql
> CMakeFiles/mh2sql.dir/utils/mh2sql.cxx.o: In function `main':
> /opt/DAQ/repos/bot/midas/utils/mh2sql.cxx:150: undefined reference to `MakeMidasHistoryODBC()'

Yes, I am in the process of changing the midas history interface and accidentally committed a version of 
mh2sql (utility for converting MIDAS history .hst files to SQL database) that uses the new interface.

This is now fixed in svn rev 4571.

The new C++ interface to the MIDAS history is in include/history.h and implementations for data storage 
using both midas .hst files and SQL (ODBC/MySQL) database are also committed (history_midas.cxx
and history_sql.cxx). The file history_odbc.cxx will be removed after some more testing of the new 
interface.

(All the new code is not activated yet, pending more testing).

K.O.

> $ odbedit -e expcvadc
> odbedit: /opt/DAQ/repos/bot/midas/src/odb.c:651: db_validate_sizes: Assertion 
`sizeof(EQUIPMENT_INFO) == 400' failed.

Yes, this is now fixed, svn rev 4571 should be okey. Sorry about causing this problem - Stefan added 
some useful additional data to EQUIPMENT_INFO and my check for binary compatibility caught it and 
complained. Unfortunately on Saturday Stefan had to abruptly go back to PSI and things have been a little 
bit chaotic because we did not complete the testing of all the new changes and additions.

K.O.

A new feature has been implemented in revision 4561 which allows runs with a 
certain duration. To use this, one has to set the variaable

/Logger/Run Duration

to a non-zero value in seconds. After a run lasted for this duration, it gets 
stopped automatically by the logger. If the auto-restart flag is on, this allows 
sequences of automatically started and stopped runs with all then have the same 
duration.

> A new feature has been implemented in revision 4561 which allows runs with a 
> certain duration. To use this, one has to set the variaable
> 
> /Logger/Run Duration
> 
> to a non-zero value in seconds. After a run lasted for this duration, it gets 
> stopped automatically by the logger. If the auto-restart flag is on, this allows 
> sequences of automatically started and stopped runs with all then have the same 
> duration.

A similar scheme has been implemented to pose a certain duration on subruns. This can 
be controlled by the variable

/Logger/Subrun duration

when set to a non-zero value in seconds.