Hello, 
I'm trying to make Wiener PCIVME link work with MIDAS. 
In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener board
supported. (see Wiener PCI)".
Provided link is dead. Does anyone have that file? I would appreciate very very
much if someone could send it to me.

Thank you and best regards, 
L.P.

> Hello, 
> I'm trying to make Wiener PCIVME link work with MIDAS. 
> In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener board
> supported. (see Wiener PCI)".
> Provided link is dead. Does anyone have that file? I would appreciate very very
> much if someone could send it to me.
> 
> Thank you and best regards, 
> L.P.

Hi, I am not familiar with this module, I am pretty sure I have never seen one.
I do not see any code for it in the midas distribution.
I do not see any reference to it on the wiener web site (http://www.wiener-d.com/)

For obsolete modules, they direct us to http://file.wiener-d.com/ which is dead.

The next best step is to contact Wiener customer support. They usually reply very quickly.

If you have no luck getting answer directly from Wiener, you can ask me to contact them through
our sales representative. He is always super very helpful.

K.O.

> > Hello, 
> > I'm trying to make Wiener PCIVME link work with MIDAS. 
> > In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener board
> > supported. (see Wiener PCI)".
> > Provided link is dead. Does anyone have that file? I would appreciate very very
> > much if someone could send it to me.
> > 
> > Thank you and best regards, 
> > L.P.
> 
> Hi, I am not familiar with this module, I am pretty sure I have never seen one.
> I do not see any code for it in the midas distribution.
> I do not see any reference to it on the wiener web site (http://www.wiener-d.com/)
> 
> For obsolete modules, they direct us to http://file.wiener-d.com/ which is dead.
> 
> The next best step is to contact Wiener customer support. They usually reply very quickly.
> 
> If you have no luck getting answer directly from Wiener, you can ask me to contact them through
> our sales representative. He is always super very helpful.
> 
> K.O.

Hi, 
I'm having a meeting with Wiener during this weekend, I'll try to dig some info about that module. But I do recall that we had this interface and provided a driver for it.
More later... 
PAA

> > Hello, 
> > I'm trying to make Wiener PCIVME link work with MIDAS. 
> > In documentation/VME dirvers/ it's saying: "wevmemm.c PCI/VME Wiener 
board
> > supported. (see Wiener PCI)".
> > Provided link is dead. Does anyone have that file? I would appreciate 
very very
> > much if someone could send it to me.
> > 
> > Thank you and best regards, 
> > L.P.
> 
> Hi, I am not familiar with this module, I am pretty sure I have never 
seen one.
> I do not see any code for it in the midas distribution.
> I do not see any reference to it on the wiener web site 
(http://www.wiener-d.com/)
> 
> For obsolete modules, they direct us to http://file.wiener-d.com/ which 
is dead.
> 
> The next best step is to contact Wiener customer support. They usually 
reply very quickly.
> 
> If you have no luck getting answer directly from Wiener, you can ask me 
to contact them through
> our sales representative. He is always super very helpful.
> 
> K.O.

Hi, I do recall that we had this interface a while ago. 
I'll be meeting with Wiener during the weekend and will post my findings 
later. 
PAA 

Hi everyone, 

We have recently been experiencing a lot of lag with our midas control webpage,
which is making it very frustrating to use. Has anyone experienced this, and do
you have any advice to speed it up? Are there particular web browsers that work
better than others, or certain settings that can make respond more quickly?

Thanks!
Wes

> Hi everyone, 
> 
> We have recently been experiencing a lot of lag with our midas control webpage,
> which is making it very frustrating to use. Has anyone experienced this, and do
> you have any advice to speed it up? Are there particular web browsers that work
> better than others, or certain settings that can make respond more quickly?
> 
> Thanks!
> Wes

We saw this happening as well. In our case, we could track this down to mhttpd
taking a lot of CPU. A kill/restart of mhttpd is usually doing the trick (without
disturbing data taking). We did not find an obvious reason for this happening.

> > Hi everyone, 
> > 
> > We have recently been experiencing a lot of lag with our midas control webpage,
> > which is making it very frustrating to use. Has anyone experienced this, and do
> > you have any advice to speed it up? Are there particular web browsers that work
> > better than others, or certain settings that can make respond more quickly?
> > 
> > Thanks!
> > Wes
> 
> We saw this happening as well. In our case, we could track this down to mhttpd
> taking a lot of CPU. A kill/restart of mhttpd is usually doing the trick (without
> disturbing data taking). We did not find an obvious reason for this happening.

One place where mhttpd can be stalled (and even go into infornite loop) is making history plots.

If you ask for a history plot of 10 variables across 1 year, nobody can access any midas web page
until mhttpd finishes grinding through the history data. (with the old .hst history format is was exceedingly 
slow, with the new "file" format, it is pretty quick, but everybody still has to wait). If you leave this page 
open, it will autorefresh every so many minutes ensuring continuing delays for other mhttpd users.

The other place for stalling mhttpd was in the run transitions (mhttpd was unresponsive while executing a 
run transition), this was fixed by the multithreaded transitions.

To fix the unresponsive history requests, you can try to setup a separate "history mhttpd", run a second 
mhttpd on a different port (with "-H" if desired), put this URL of this mhttpd in ODB "/history/url". (if you 
are using my instructions for setting up the apache httpd proxy, you can see provisions for this. 
/history/url will be set to "https://proxy.host.net/history/").

If neither of the above, there is the usual culprits of bad networking somewhere, etc.

Best way to test if delays are in midas or elsewhere is to stand in front of your midas computer, run a 
current version of google-chrome or firefox right on it, there should be no delays.

K.O.

> > > 
> > > We have recently been experiencing a lot of lag with our midas control webpage,
> > > which is making it very frustrating to use. Has anyone experienced this, and do
> > > you have any advice to speed it up? Are there particular web browsers that work
> > > better than others, or certain settings that can make respond more quickly?
> > > 

Wes, you provided excessive information. Who is "we", what is your location (internet in africa is different from internet in canada),
what is your computer (rpi3 is different from mac mini), what is your os (fedora-1 is different from centos-7), what
is your browser (netscape is different from google-chrome).

As to "what browser should work", on MacOS, google-chrome and firefox should be ok (that's what I test), on Linux,
stock firefox (usually an oldish esr version) should work, on el7 and ubuntu google-chrome works. On windows, google-chrome
and firefox should be ok. microsoft browsers probably not ok (no testing). cellphone browsers also not tested (but google-chrome and firefox 
should be ok).

K.O.

Dear experts,
    we have a problem when trying to run a MIDAS DAQ which worked in the past on the same PC (but on a different
network). We get the following error messages when starting a new run:

Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:9106:rpc_client_connect,ERROR] cannot connect to host "scar
lett", port 44858: connect() returned -1, errno 113 (No route to host)
Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:3539:cm_transition_call,ERROR] cannot connect to client "Lo
gger" on host scarlett, port 44858, status 503

(scarlett is indeed the hostname of the PC). The error occurs even if the PC is disconnected from the network.

Any suggestion?

Best Regards,
        Francesco

Dear Francesco,

Your error (No route to host) typically means that you have a network problem outside of MIDAS. Your computer has to "find itself" and 
this is probably broken. Try to do a "ping scarlett" or "nslookup scarlett" and you will see that the DNS server can't be reached or is 
wrongly configured. Sometimes it helps to put scarlett explicitly into /etc/hosts

Stefan


> Dear experts,
>     we have a problem when trying to run a MIDAS DAQ which worked in the past on the same PC (but on a different
> network). We get the following error messages when starting a new run:
> 
> Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:9106:rpc_client_connect,ERROR] cannot connect to host "scar
> lett", port 44858: connect() returned -1, errno 113 (No route to host)
> Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:3539:cm_transition_call,ERROR] cannot connect to client "Lo
> gger" on host scarlett, port 44858, status 503
> 
> (scarlett is indeed the hostname of the PC). The error occurs even if the PC is disconnected from the network.
> 
> Any suggestion?
> 
> Best Regards,
>         Francesco

Dear Stefan,
           thank you very much for your reply. We could finally fix the problem by replacing "scarlett" with "scarlett.localdomain" in our
hostname configuration file /etc/hostname (under debian).

Best Regards,
        Francesco

> Dear Francesco,
> 
> Your error (No route to host) typically means that you have a network problem outside of MIDAS. Your computer has to "find itself" and 
> this is probably broken. Try to do a "ping scarlett" or "nslookup scarlett" and you will see that the DNS server can't be reached or is 
> wrongly configured. Sometimes it helps to put scarlett explicitly into /etc/hosts
> 
> Stefan
> 
> 
> > Dear experts,
> >     we have a problem when trying to run a MIDAS DAQ which worked in the past on the same PC (but on a different
> > network). We get the following error messages when starting a new run:
> > 
> > Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:9106:rpc_client_connect,ERROR] cannot connect to host "scar
> > lett", port 44858: connect() returned -1, errno 113 (No route to host)
> > Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:3539:cm_transition_call,ERROR] cannot connect to client "Lo
> > gger" on host scarlett, port 44858, status 503
> > 
> > (scarlett is indeed the hostname of the PC). The error occurs even if the PC is disconnected from the network.
> > 
> > Any suggestion?
> > 
> > Best Regards,
> >         Francesco

> Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:9106:rpc_client_connect,ERROR] cannot connect to host "scar
> lett", port 44858: connect() returned -1, errno 113 (No route to host)

Forgot to reply to this: if you read the error messages, you will see the actual problem is "no route to host". Next step
is to ping the same hostname or try "telnet hostname 22" (cut-and-paste the hostname from the error message
to avoid the common pitfall of not seeing a typo, i.e. ping host00 works while midas connect to hostOO does not (zero vs capital-o)).
In your case you had the wrong hostname ("foo" and "foo.localdomain" resolve to different IP addresses, one works the other
one does not). You can also try to use the IP address instead of hostname, this will avoid hostname resolution problems
(inconsistency between /etc/hosts and hostnames in DNS is very easy to have when using self-made private networks).

K.O.

Dear MIDAS users,

We would like to announce another MIDAS workshop at TRIUMF on July 26, 2017. 
This will be a follow-on to the successful workshop two years ago.  This
workshop will again be during one of Stefan Ritt's visit to TRIUMF.

The goal of the workshop would be to have a general discussion on the state of
MIDAS.  We would have presentations from MIDAS developers on new MIDAS features
that are being implemented, with a particular focus on improvements to MIDAS web
functionality and analyzers.  But equally important would be to hear the
experiences of MIDAS users. What aspects of MIDAS work well?  Which aspects need
improving?  What are the major trends in scientific computing that we should
adapt to?  We always appreciate feedback and suggestions from the MIDAS
community (even when we have trouble finding time to make the changes!)

We will naturally broadcast the workshop on the web, but it would also be great
if anyone was interested in coming to TRIUMF in person to participate.

Thomas, on behalf of MIDAS developers

Hello,

I am using a CAEN v1720 to digitise signal coming from 5 PMTs and I need to extend the read-
out window to 1ms.

Given the sampling frequency of 250 MHz, each event would consist of about 4.78 MB

Accordingly to the documentation I found in:

https://midas.triumf.ca/MidasWiki/index.php/Event_Buffer

 - I modified the value of ODB /Experiment/MAX_EVENT_SIZE to 8 MB (I overestimated it in case 
I will readout all 8 channels of the v1720)
 - I modified the ODB key /Experiment/Buffer Sizes/SYSTEM to 512 MB (which allow to contain 
about 100 events in the buffer)

The max_event_size in the frontend source code is set to 32 MB while the event_buffer size is 
200 times the max_event_size. So I did not modify those values.

When I start a new run, the MIDAS crash and the ODB gets corrupted:

$ odbedit 
[ODBEdit,ERROR] [odb.c:1134:db_open_database,ERROR] Different database format: Shared 
memory is 262148000, program is 3
[ODBEdit,ERROR] [midas.c:2157:cm_connect_experiment1,ERROR] cannot open database
Unexpected error #326

Do you have any idea of what might be the problem?

The same thing happen if I reduce the buffer size to 128 MB.

The computer running MIDAS has 2 Quad CPU @ 2.83GHz and 4 GB RAM.

Thank you in advance for any help!
Alberto

Dear MIDAS users,

We have an approximately final agenda for the MIDAS workshop in two weeks.  The
workshop will be on July 26, from 1-6PM (Vancouver time).  The detailed agenda is
posted here:

https://indico.triumf.ca/conferenceDisplay.py?confId=2342

Next week I will provide details on how to remotely connect to the workshop.

Cheers,
Thomas

PS: as a reminder, the timetable and slides from the last MIDAS workshop can be
found here:

https://indico.psi.ch/conferenceTimeTable.py?confId=3793#20150715



> Dear MIDAS users,
> 
> We would like to announce another MIDAS workshop at TRIUMF on July 26, 2017. 
> This will be a follow-on to the successful workshop two years ago.  This
> workshop will again be during one of Stefan Ritt's visit to TRIUMF.
> 
> The goal of the workshop would be to have a general discussion on the state of
> MIDAS.  We would have presentations from MIDAS developers on new MIDAS features
> that are being implemented, with a particular focus on improvements to MIDAS web
> functionality and analyzers.  But equally important would be to hear the
> experiences of MIDAS users. What aspects of MIDAS work well?  Which aspects need
> improving?  What are the major trends in scientific computing that we should
> adapt to?  We always appreciate feedback and suggestions from the MIDAS
> community (even when we have trouble finding time to make the changes!)
> 
> We will naturally broadcast the workshop on the web, but it would also be great
> if anyone was interested in coming to TRIUMF in person to participate.
> 
> Thomas, on behalf of MIDAS developers

Dear MIDAS colleagues,

We will use Zoom for people making remote connections to the MIDAS workshop next week.  The connection details 
are shown below.  You will need to install a Zoom application, which should happen automatically when clicking on the 
first link below.  It seemed to work pretty easily for me.

Cheers,
Thomas
 
_________________________________________

Hi there,

Thomas Lindner is inviting you to a scheduled Zoom meeting.

Topic: MIDAS workshop
Time: Jul 26, 2017 12:30 PM Pacific Time (US and Canada)

Join from PC, Mac, Linux, iOS or Android: https://zoom.us/j/749477537?pwd=-TSKYSiS0_k
    Password: midas

Or iPhone one-tap (US Toll):  +16465588656,,749477537# or +14086380968,,749477537#

Or Telephone:
    Dial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)
    Meeting ID: 749 477 537
    International numbers available: https://zoom.us/zoomconference?m=0Bug-COhDHYndpVqRLnNST9H-uXrauWk




> Dear MIDAS users,
> 
> We have an approximately final agenda for the MIDAS workshop in two weeks.  The
> workshop will be on July 26, from 1-6PM (Vancouver time).  The detailed agenda is
> posted here:
> 
> https://indico.triumf.ca/conferenceDisplay.py?confId=2342
> 
> Next week I will provide details on how to remotely connect to the workshop.
> 
> Cheers,
> Thomas
> 
> PS: as a reminder, the timetable and slides from the last MIDAS workshop can be
> found here:
> 
> https://indico.psi.ch/conferenceTimeTable.py?confId=3793#20150715
> 
> 
> 
> > Dear MIDAS users,
> > 
> > We would like to announce another MIDAS workshop at TRIUMF on July 26, 2017. 
> > This will be a follow-on to the successful workshop two years ago.  This
> > workshop will again be during one of Stefan Ritt's visit to TRIUMF.
> > 
> > The goal of the workshop would be to have a general discussion on the state of
> > MIDAS.  We would have presentations from MIDAS developers on new MIDAS features
> > that are being implemented, with a particular focus on improvements to MIDAS web
> > functionality and analyzers.  But equally important would be to hear the
> > experiences of MIDAS users. What aspects of MIDAS work well?  Which aspects need
> > improving?  What are the major trends in scientific computing that we should
> > adapt to?  We always appreciate feedback and suggestions from the MIDAS
> > community (even when we have trouble finding time to make the changes!)
> > 
> > We will naturally broadcast the workshop on the web, but it would also be great
> > if anyone was interested in coming to TRIUMF in person to participate.
> > 
> > Thomas, on behalf of MIDAS developers

Hi Folks,

I just realized I never provided the location for the meeting (for those at TRIUMF).  It will be in the ISAC-II conference room.

Cheers,
Thomas

> Dear MIDAS colleagues,
> 
> We will use Zoom for people making remote connections to the MIDAS workshop next week.  The connection details 
> are shown below.  You will need to install a Zoom application, which should happen automatically when clicking on the 
> first link below.  It seemed to work pretty easily for me.
> 
> Cheers,
> Thomas
>  
> _________________________________________
> 
> Hi there,
> 
> Thomas Lindner is inviting you to a scheduled Zoom meeting.
> 
> Topic: MIDAS workshop
> Time: Jul 26, 2017 12:30 PM Pacific Time (US and Canada)
> 
> Join from PC, Mac, Linux, iOS or Android: https://zoom.us/j/749477537?pwd=-TSKYSiS0_k
>     Password: midas
> 
> Or iPhone one-tap (US Toll):  +16465588656,,749477537# or +14086380968,,749477537#
> 
> Or Telephone:
>     Dial: +1 646 558 8656 (US Toll) or +1 408 638 0968 (US Toll)
>     Meeting ID: 749 477 537
>     International numbers available: https://zoom.us/zoomconference?m=0Bug-COhDHYndpVqRLnNST9H-uXrauWk
> 
> 
> 
> 
> > Dear MIDAS users,
> > 
> > We have an approximately final agenda for the MIDAS workshop in two weeks.  The
> > workshop will be on July 26, from 1-6PM (Vancouver time).  The detailed agenda is
> > posted here:
> > 
> > https://indico.triumf.ca/conferenceDisplay.py?confId=2342
> > 
> > Next week I will provide details on how to remotely connect to the workshop.
> > 
> > Cheers,
> > Thomas
> > 
> > PS: as a reminder, the timetable and slides from the last MIDAS workshop can be
> > found here:
> > 
> > https://indico.psi.ch/conferenceTimeTable.py?confId=3793#20150715
> > 
> > 
> > 
> > > Dear MIDAS users,
> > > 
> > > We would like to announce another MIDAS workshop at TRIUMF on July 26, 2017. 
> > > This will be a follow-on to the successful workshop two years ago.  This
> > > workshop will again be during one of Stefan Ritt's visit to TRIUMF.
> > > 
> > > The goal of the workshop would be to have a general discussion on the state of
> > > MIDAS.  We would have presentations from MIDAS developers on new MIDAS features
> > > that are being implemented, with a particular focus on improvements to MIDAS web
> > > functionality and analyzers.  But equally important would be to hear the
> > > experiences of MIDAS users. What aspects of MIDAS work well?  Which aspects need
> > > improving?  What are the major trends in scientific computing that we should
> > > adapt to?  We always appreciate feedback and suggestions from the MIDAS
> > > community (even when we have trouble finding time to make the changes!)
> > > 
> > > We will naturally broadcast the workshop on the web, but it would also be great
> > > if anyone was interested in coming to TRIUMF in person to participate.
> > > 
> > > Thomas, on behalf of MIDAS developers

> Hi. Is it currently possible to automatically save the MIDAS ODB as a JSON file?
> I can do it manually in odbedit, but it looks like the only option for the
> automatic ODB save for each run is the standard .ODB format. Is there a way to
> change this?

I have the reverse question: Once we have a json file, can it be loaded again in the odb? We also use the odb as our analysis config. I don`t like .odb files in our repo, so we currently load settings in shell scripts (e.g. run dependent detector calibrations)

Is there a simple way from the javascript side to check if a fontend is running?
Currently one would need to go through the /System/Client list to find out if a
frontend/client is running. Wouldn't it be nice to have this centralized, either
in the mhttpd.cxx or mhttpd.js part?