Back Midas Rome Roody Rootana
  Midas DAQ System, Page 12 of 49  Not logged in ELOG logo
Entry  09 Nov 2021, Francesco Renga, Forum, Issue in data writing speed 
Dear all,
       I've a frontend writing a quite big bunch of data into a MIDAS bank (16bit output from a 4MP photo camera). 
I'm experiencing a writing speed problem that I don't understand. When the photo camera is triggered at a low rate (< 2 Hz) 
    Reply  10 Nov 2021, Stefan Ritt, Forum, Issue in data writing speed 
Midas uses various buffers (in the frontend, at the server side before the SYSTEM buffer, the SYSTEM buffer itself, on the 
logger before writing to disk. All these buffers are in RAM and have fast access, so you can fill them pretty quickly. When
they are full, the logger writes to disk, which is slower. So I believe at 2 Hz your disk can keep up with your writing 
    Reply  26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed 
Francesco, when you say "writing an event is slow", do you mean it in the frontend
or in the output data file?
       Reply  26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed 
> Francesco, when you say "writing an event is slow", do you mean it in the frontend
> or in the output data file?
Entry  09 Nov 2021, Hunter Lowe, Forum, MityCAMAC Login  
Hello all,

I've recently acquired a MityCAMAC system that was built at TRIUMF and I'm 
    Reply  11 Nov 2021, Thomas Lindner, Forum, MityCAMAC Login  
Hi Hunter 

This sounds like a Triumf specific problem; 
       Reply  26 Jan 2022, Konstantin Olchanski, Info, MityCAMAC Login  
For those curious about CAMAC controllers, this one was built around 2014 to 
replace the aging CAMAC A1/A2 controllers (parallel and serial) in the TRIUMF 
cyclotron controls system (around 50 CAMAC crates). It implements the main
Entry  16 Dec 2021, Zaher Salman, Forum, Device driver for modbus 
Dear all, does anyone have an example of for a device driver using modbus or modbus tcp to communicate with a device and willing to share it? Thanks.
    Reply  26 Jan 2022, Konstantin Olchanski, Forum, Device driver for modbus 
> Dear all, does anyone have an example of for a device driver using modbus or modbus tcp to communicate with a device and willing to share it? Thanks.

I have not seen any modbus devices recently, so all my code and examples are quite old.
Entry  19 Nov 2021, Jacob Thorne, Forum, Sequencer error with ODB Inc 
Hi,

I am having problems with the midas sequencer, here is my code:
    Reply  02 Dec 2021, Stefan Ritt, Forum, Sequencer error with ODB Inc 
Thanks for reporting that bug. Indeed there was a problem in the sequencer code which I fixed now. Please try the updated develop branch.

Stefan
Entry  29 Oct 2021, Frederik Wauters, Bug Report, midas::odb::iterator + operator 
I have 16 array odb key

{"FIR Energy", {
    Reply  29 Oct 2021, Frederik Wauters, Bug Report, midas::odb::iterator + operator | work around 
ok, so retrieving as a std::array (as it was defined) does not work

    std::array<uint32_t,16> avalues = settings["FIR Energy"]["Energy Gap Value"];
Entry  25 Oct 2021, Francesco Renga, Forum, Logger crash 
Hello,
     I'm experiencing crashes of the mlogger program on the time scale of a couple 
of days. The only messages from MIDAS are:
    Reply  25 Oct 2021, Stefan Ritt, Forum, Logger crash 
The short term solution would be to increase the logger timeout in the ODB under

/Programs/Logger/Watchdog timeout
Entry  14 Oct 2021, Amy Roberts, Suggestion, Adding (or improving discoverability) of TID for odbset 
Creating an ODB key requires users to know the Type ID that are defined in 
https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.
    Reply  15 Oct 2021, Stefan Ritt, Suggestion, Adding (or improving discoverability) of TID for odbset 
> Creating an ODB key requires users to know the Type ID that are defined in 
> https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.
Entry  11 Oct 2021, Konstantin Olchanski, Forum, midas forum updated, moved 
The midas forum software (elogd) was updated to latest version and moved from our old server 
(ladd00.triumf.ca) to our new server (daq00.triumf.ca).
Entry  11 Oct 2021, Konstantin Olchanski, Forum, test 
test, no email. K.O.
    Reply  11 Oct 2021, Konstantin Olchanski, Forum, test 
> test, no email. K.O.

test reply, no email. K.O.
       Reply  11 Oct 2021, Konstantin Olchanski, Forum, test image.png
> > test, no email. K.O.

> test reply, no email. K.O.
          Reply  11 Oct 2021, Konstantin Olchanski, Forum, test 
> > > test, no email. K.O.
> > 
> > test reply, no email. K.O.
Entry  11 Oct 2021, Stefan Ritt, Info, Modification in the history logging system 
A requested change in the history logging system has been made today. Previously, history values were
logged with a maximum frequency (usually once per second) but also with a minimum frequency, meaning
that values were logged for example every 60 seconds, even if they did not change. This causes a problem.
Entry  29 Sep 2021, Richard Longland, Bug Report, nstall clash between MIDAS 2020-08 and mscb 
Thank you, Stefan.

I found these instructions under
    Reply  29 Sep 2021, Stefan Ritt, Bug Report, nstall clash between MIDAS 2020-08 and mscb 
> Thank you, Stefan.

> I found these instructions under
Entry  28 Sep 2021, Richard Longland, Bug Report, Install clash between MIDAS 2020-08 and mscb 
All,

I am performing a fresh install of MIDAS on an Ubuntu linux box. I follow the 
    Reply  28 Sep 2021, Stefan Ritt, Bug Report, Install clash between MIDAS 2020-08 and mscb 
> 1) git clone https://bitbucket.org/tmidas/midas --recursive
> 2) cd midas
> 3) git checkout release/midas-2020-08
Entry  19 Sep 2021, Stefan Ritt, Bug Fix, Chat working again Screenshot_2021-09-19_at_21.27.19_.png
Not sure how many people are using it, but the Chat facility in midas was broken 
for some time now and got fixed today again.
Entry  06 Sep 2021, Andreas Suter, Forum, mhttpd crash 
midas version used: midas-2019-05-cxx-1461-g906be8b

I find in the systemd log every couple of days/weeks the following error message related to the mhttpd:
    Reply  06 Sep 2021, Konstantin Olchanski, Forum, mhttpd crash 
> [mhttpd,ERROR] [mhttpd.cxx:18886:on_work_complete,ERROR] Should not send response to request from socket 28 to socket 26, abort!
> Can anybody hint me what is going wrong here?
> The bad thing on the crash is, that sometimes it is leading to a "chain-reaction" killing multiple midas frontends, which essentially stop the experiment.
       Reply  07 Sep 2021, Andreas Suter, Forum, mhttpd crash 
Dear Konstantin,

thanks for the prompt response, this helps a lot!
          Reply  17 Sep 2021, Stefan Ritt, Forum, mhttpd crash mhttpdScreenshot_2021-09-17_at_21.11.15_.png
To limit the impact of the numerous crashes of mhttpd, I installed the monit tool at MEG at PSI 
(https://en.wikipedia.org/wiki/Monit). It monitors mhttpd, and if it cannot connect to it for a certain
time, it kills the process and restarts it. This covers endless loops, simple crashes (caused by the
Entry  24 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
I am updating the history plots. Main changes:

- the old history display code should again be easily usable (use the "open in old history display" checkbox)
    Reply  24 Jun 2021, Stefan Ritt, Bug Fix, changes in history plots 
I disagree with the proposed change to scale the HV current for a "nice" display. If values are scaled, the axis should be 
scaled in the same way. Otherwise people might read the current from the plot, look at the axis, and again get the wrong 
value (the factor of 25x you mention). Sure you can hover with the cursor over the graph, and see the right value, but think 
       Reply  25 Jun 2021, Marco Francesconi, Bug Fix, changes in history plots 
We are using the new history formula as a quick way to convert signals from sensors to actual physical values (for example Voltage->Temperature, Voltage->relative
humidity 
...), so it is great that the shown voltage is the calculated one.
          Reply  25 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
I will have to post an example of a scaled plot. I figure everybody forgot how they look like.

K.O.
       Reply  25 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
> I disagree ...

I am happy with disagreement and differences of opinions. Zest of life, driver of progress and improvements, etc.
          Reply  25 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
> > The only "correct" way in my opinion is to implement two vertical axis, as can be seen in some papers. One for the HV, and a 
> > new TBD right axis for the current values, then indicating for each graph if the left or right vertical axis applies. For 
> > the secondary axis we can have autoscaling or fixed scaling, as we have for the primary axis.
    Reply  25 Jun 2021, Stefan Ritt, Bug Fix, changes in history plots 
A general warning: With the recent history changes implemented in the develop branch, starting from a fresh ODB and editing 
any history panel, on gets tons of errors and debug output from mhttpd:
       Reply  25 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
> A general warning: With the recent history changes implemented in the develop branch, starting from a fresh ODB and editing 
> any history panel, on gets tons of errors and debug output from mhttpd: ...
    Reply  30 Jun 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
> I am updating the history plots.
> So the idea is to use this computation:
> y_position_on_plot = offset + factor*(formula(history_value) - voffset)
       Reply  14 Jul 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
Moving in the direction of this proposal. History plot editor is updated according to it. Remaining missing piece is the "show 
raw value" buttons and code behind them.
          Reply  14 Jul 2021, Konstantin Olchanski, Bug Fix, changes in history plots 
> Moving in the direction of this proposal. Remaining missing piece is the "show 
> raw value" buttons and code behind them.
             Reply  24 Aug 2021, Stefan Ritt, Bug Fix, changes in history plots 
One addition I would be in favour of is to remove the "Order" and replace it with drag&drop handles, because this is what people are more 
used to today. Only the old guys like us remember the /etc/init.d/xx_yy scheme where one uses an integer number in the file name to 
determine an order. 
Entry  19 Aug 2021, Konstantin Olchanski, Bug Report, select() FD_SETSIZE overrun 
I am looking at the mlogger in the ALPHA anti-hydrogen experiment at CERN. It is 
mysteriously misbehaving during run start and stop.
    Reply  20 Aug 2021, Stefan Ritt, Bug Report, select() FD_SETSIZE overrun 
> I am looking at the mlogger in the ALPHA anti-hydrogen experiment at CERN. It is 
> mysteriously misbehaving during run start and stop.
Entry  12 May 2021, Mathieu Guigue, Bug Report, mhttpd WebServer ODBTree initialization 
Hi,

Using midas version 12-2020,  I am trying to run mhttpd from within a docker container using docker-compose.
    Reply  12 May 2021, Ben Smith, Bug Report, mhttpd WebServer ODBTree initialization 
> midas_hatfe_1  | Mongoose web server listening on http address "localhost:8080", passwords OFF, hostlist OFF
> midas_hatfe_1  | [mhttpd,ERROR] [mhttpd.cxx:19160:mongoose_listen,ERROR] Cannot mg_bind address "[::1]:8080"
       Reply  12 May 2021, Stefan Ritt, Bug Report, mhttpd WebServer ODBTree initialization 
> It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable
IPv6" to false.
          Reply  13 May 2021, Mathieu Guigue, Bug Report, mhttpd WebServer ODBTree initialization 
> > It looks like mhttpd managed to bind to the IPv4 address (localhost), but not the IPv6 address (::1). If you don't need it, try setting "/Webserver/Enable
IPv6" to false.
             Reply  14 May 2021, Stefan Ritt, Bug Report, mhttpd WebServer ODBTree initialization 
> Thanks a lot, this solved my issue!

... or we should turn IPv6 off by default, since not many people use this right now.
                Reply  02 Jun 2021, Konstantin Olchanski, Bug Report, mhttpd WebServer ODBTree initialization 
> > Thanks a lot, this solved my issue!

> ... or we should turn IPv6 off by default, since not many people use this right now.
                   Reply  05 Aug 2021, Stefan Ritt, Bug Report, mhttpd WebServer ODBTree initialization 
Well, we all see it here at PSI, so this is enough reason to turn this off by default. Shall 
I do it?
Entry  04 Jun 2021, Andreas Suter, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
Hi,

if I check out midas and try to configure it with 
    Reply  04 Jun 2021, Konstantin Olchanski, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas

good timing, I am working on cmake for manalyzer and rootana and I have not tested
    Reply  04 Jun 2021, Konstantin Olchanski, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> Is the cmake setup not relocatable? This is new and was working until recently:
       Reply  04 Jun 2021, Andreas Suter, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > Is the cmake setup not relocatable? This is new and was working until recently:
          Reply  08 Jun 2021, Konstantin Olchanski, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> > > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > > Is the cmake setup not relocatable? This is new and was working until recently:
> > Not relocatable. This is because we do not install the header files.
             Reply  09 Jun 2021, Andreas Suter, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> > > > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > > > Is the cmake setup not relocatable? This is new and was working until recently:
> > > Not relocatable. This is because we do not install the header files.
                Reply  10 Jun 2021, Konstantin Olchanski, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> > > > > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > > > > Is the cmake setup not relocatable? This is new and was working until recently:
> > > > Not relocatable. This is because we do not install the header files.
                   Reply  10 Jun 2021, Andreas Suter, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
> > > > > > cmake ../ -DCMAKE_INSTALL_PREFIX=/usr/local/midas
> > > > > > Is the cmake setup not relocatable? This is new and was working until recently:
> > > > > Not relocatable. This is because we do not install the header files.
                      Reply  11 Jul 2021, Konstantin Olchanski, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
big thanks to Andreas S. for getting most of this figured out. I now understand
much better how cmake installs things and how it generates config files, both
find_package(midas) style and install(export) style.
                         Reply  02 Aug 2021, Andreas Suter, Bug Report, cmake with CMAKE_INSTALL_PREFIX fails 
Dear Konstantin,

I have tried your adopted version. You did already quite a job which is more consistent than what I was suggesting.
Entry  31 Jul 2021, Peter Kunz, Bug Report, ss_shm_name: unsupported shared memory type, bye! 
I ran into a problem trying to compile the latest MIDAS version on a Fedora 
system.
Entry  09 Jul 2021, Konstantin Olchanski, Bug Report, cmake question 
cmake check and mate in 1 move. please help.

the midas cmake file has a typo in the ROOT_CXX_FLAGS, I fixed it and now I am dead in the 
    Reply  13 Jul 2021, Konstantin Olchanski, Bug Report, cmake question 
> cmake check and mate in 1 move. please help.
> -std=c++11 and -std=c++14 collision...
       Reply  14 Jul 2021, Konstantin Olchanski, Bug Report, cmake question 
> > cmake check and mate in 1 move. please help.
> > -std=c++11 and -std=c++14 collision...
ELOG V3.1.4-2e1708b5