 13 Jul 2017, Konstantin Olchanski, Info, implemented: json-rpc batch requests
|
The mhttpd json-rpc interface now implements batch requests per
http://www.jsonrpc.org/specification#batch
|
|
19 Jun 2017, Thomas Lindner, Bug Report, mhttpd ODB editor changes string length, breaks
|
I guess this might be related to the changes in the last elog conversation; but
I'll break it out as a separate problem.
|
 21 Jun 2017, Thomas Lindner, Bug Report, mhttpd ODB editor changes string length, breaks
|
To follow up; with some help from Konstantin and Stefan, we realized that this
particular problem should already be fixed. While I was using the most recent version
of MIDAS, I hadn't rebuild the EPICS frontend programs when I was doing this test. Once
|
|
20 Jun 2017, Richard Longland, Forum, High Rate
|
| |
|
07 Jun 2017, Alberto Remoto, Forum, Increase MAX_EVENT_SIZE
|
Hello,
I am using a CAEN v1720 to digitise signal coming from 5 PMTs and I need to extend the read-
|
|
13 Apr 2017, Andreas Suter, Bug Report, stop form odbedit broken
|
when I try to stop a run from odbedit I get a core dump.
[ODBEdit1,INFO] Run #31 stopped odbedit: src/system.c:1223: ss_shm_flush:
|
|
13 Apr 2017, Andreas Suter, Bug Report, stop form odbedit broken
|
> when I try to stop a run from odbedit I get a core dump.
>
> [ODBEdit1,INFO] Run #31 stopped odbedit: src/system.c:1223: ss_shm_flush:
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, stop form odbedit broken
|
> > when I try to stop a run from odbedit I get a core dump.
> >
> > [ODBEdit1,INFO] Run #31 stopped odbedit: src/system.c:1223: ss_shm_flush:
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
>
> I shall check on the use of MAX_STRING_LENGTH at least in odb itself...
>
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> >
> > I shall check on the use of MAX_STRING_LENGTH at least in odb itself...
> >
|
|
19 Apr 2017, Stefan Ritt, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> Fixed a small buglet, now saving and reloading odb in the old ".odb" format will silently truncate all overlong strings to 256 bytes. (I think it always
did that).
|
|
22 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> > Fixed a small buglet, now saving and reloading odb in the old ".odb" format will silently truncate all overlong strings to 256 bytes. (I think it always
did that).
>
|
|
06 Jun 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> ... the xml reader, probably has same problem
> ... xml writer truncates long strings via truncation in db_sprintf()
|
|
19 Apr 2017, Stefan Ritt, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
ODB name lengths (the name of a key) are limited to 256 characters, the length of strings in the ODB should NOT be limited. At some point we wanted to have
complete web pages inside the ODB,
which for sure are longer than 256 characters. While this was the idea, I see now that db_paste & co. is hopelessly broken. To fix it, everything should |
|
22 Apr 2017, Konstantin Olchanski, Bug Report, MAX_STRING_LENGTH, stop form odbedit broken
|
> ODB name lengths (the name of a key) are limited to 256 characters, the length of strings in the ODB should NOT be limited.
Right, I was not ever aware of such limitation until I just now looked at the .odb and .xml writing code. Definitely string length
|
|
02 May 2017, Konstantin Olchanski, Bug Report, mhttpd inline-editor and web MAX_STRING_LENGTH, stop form odbedit broken
|
> > I shall check on the use of MAX_STRING_LENGTH at least in odb itself...
Also tested the web interface:
|
|
24 Apr 2017, Stefan Ritt, Bug Report, stop form odbedit broken
|
> CSS File = STRING : [1024] mhttpd.css
> Sqlite dir = STRING : [1024]
> History dir = STRING : [1024]
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, where to report bugs, stop form odbedit broken
|
>
> What is the preferred channel to report potential bugs (elog / bitbucket issues)?
>
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, stop form odbedit broken
|
> when I try to stop a run from odbedit I get a core dump.
> [ODBEdit1,INFO] Run #31 stopped odbedit: src/system.c:1223: ss_shm_flush:
> Assertion `size == mmap_size[handle]' failed. Aborted (core dumped)
|
|
16 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
Suddenly the mhttpd odb inline editor is truncating the odb string entries to the actual length of the
stored string value, this causes db_get_record() explode with "structure mismatch" errors. (Not my
fault, You Honor! Honest!). For example, I see these errors from al_check() after changing
|
|
31 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> What a mess.
The mess with db_get_record() and db_open_record() is even deeper than I thought. There are several anomalies.
|
|
31 May 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> 2) replace all uses of db_open_record(MODE_READ) with db_watch() in conjunction with db_get_record1().
Done to all in-tree programs, except for mana.c (not using it), sequencer.cxx (cannot test it) and a few places where watching a TID_INT.
|
|
06 Jun 2017, Konstantin Olchanski, Bug Report, problem with odb strings and db_get_record()
|
> Done to all in-tree programs, except for mana.c (not using it), sequencer.cxx (cannot test it) and a few places where watching a TID_INT.
> Nothing more needs to be done, other than turn off the check for hotlink in db_create_record() & co (removed #define CHECK_OPEN_RECORD in odb.c).
|
|
02 Jun 2017, Stefan Ritt, Bug Report, problem with odb strings and db_get_record()
|
That all makes sense to me.
Stefan
|
|
31 May 2017, Konstantin Olchanski, Info, modified db_watch() arguments
|
for reasons unknown, db_watch() did not have an "info" parameter passed through to the callback
handler function, like it is done with db_open_record().
|
|
09 May 2017, Andreas Suter, Bug Report, mhttpd / history / export data
|
A handy feature of the history of the mhttpd is to export the data. However, this
seems to be broken. It currently only works if the run marker flag is activated by
fails otherwise. |
|
16 May 2017, Konstantin Olchanski, Bug Report, mhttpd / history / export data
|
> A handy feature of the history of the mhttpd is to export the data. However, this
> seems to be broken. It currently only works if the run marker flag is activated by
> fails otherwise.
|
|
26 Apr 2017, Konstantin Olchanski, Info, added db_get_value_string()
|
Since we have been regularly running into problems with db_get_xxx(TID_STRING) and string buffers of mismatched size,
I now implemented db_get_value_string(hdb, hkey, key_name, index, &string, create).
|
|
26 Apr 2017, Stefan Ritt, Info, added db_get_value_string()
|
Just some thought for discussion:
Rather than "spicing up" the MIDAS library here and there with C++ objects such as std::string, wouldn't it make more sense to "cleanly" wrap an ODB value |
|
02 May 2017, Konstantin Olchanski, Info, added db_get_value_string()
|
> Just some thought for discussion:
Even more thoughts:
|
|
02 May 2017, Konstantin Olchanski, Info, added db_resize_string()
|
> Since we have been regularly running into problems with db_get_xxx(TID_STRING) and string buffers of mismatched size,
> I now implemented db_get_value_string(hdb, hkey, key_name, index, &string, create).
|
|
18 Apr 2017, Andreas Suter, Bug Report, run start/stop oddity
|
I stumbled over an oddity which I would like to understand better. Here the
boundaries:
- Enable non-localhost RPC -> y
|
|
02 May 2017, Konstantin Olchanski, Bug Report, run start/stop oddity
|
I should really get around to fix this junk error message:
|
|
26 Apr 2017, Francesco Renga, Forum, Problem with logger at run start
|
Dear experts,
we have a problem when trying to run a MIDAS DAQ which worked in the past on the same PC (but on a different
network). We get the following error messages when starting a new run:
|
|
26 Apr 2017, Stefan Ritt, Forum, Problem with logger at run start
|
Dear Francesco,
Your error (No route to host) typically means that you have a network problem outside of MIDAS. Your computer has to "find itself" and
|
|
26 Apr 2017, Francesco Renga, Forum, Problem with logger at run start
|
Dear Stefan,
thank you very much for your reply. We could finally fix the problem by replacing "scarlett" with "scarlett.localdomain" in our
hostname configuration file /etc/hostname (under debian).
|
|
02 May 2017, Konstantin Olchanski, Forum, Problem with logger at run start
|
> Wed Apr 26 23:03:12 2017 [mhttpd,ERROR] [midas.c:9106:rpc_client_connect,ERROR] cannot connect to host "scar
> lett", port 44858: connect() returned -1, errno 113 (No route to host)
|
|
02 May 2017, Konstantin Olchanski, Info, mhttpd inline-editor change
|
I changed the mhttpd odb inline editor to use the json-rpc interface. Good things:
- browser no longer complains about obsolete synchronous ajax calls
|
|
17 Mar 2017, Pierre Gorel, Bug Report, badly managed case in history_schema.cxx: dat file empty
|
For an unknown reason, Logger died few days ago while writing the history. The
file mhf_1489577446_20170315_system.dat was created, but was empty.
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, badly managed case in history_schema.cxx: dat file empty
|
> For an unknown reason, Logger died few days ago while writing the history. The
> file mhf_1489577446_20170315_system.dat was created, but was empty.
|
|
14 Apr 2017, Wes Gohn, Forum, mhttpd lag
|
Hi everyone,
We have recently been experiencing a lot of lag with our midas control webpage,
|
|
14 Apr 2017, Pierre Gorel, Forum, mhttpd lag
|
> Hi everyone,
>
> We have recently been experiencing a lot of lag with our midas control webpage,
|
|
15 Apr 2017, Konstantin Olchanski, Forum, mhttpd lag
|
> > Hi everyone,
> >
> > We have recently been experiencing a lot of lag with our midas control webpage,
|
|
15 Apr 2017, Konstantin Olchanski, Forum, mhttpd lag, which browser
|
> > >
> > > We have recently been experiencing a lot of lag with our midas control webpage,
> > > which is making it very frustrating to use. Has anyone experienced this, and do
|
|
05 Apr 2017, Andreas Suter, Bug Report, Equipment Expand doesn't work anymore
|
I'd liked very much the possibility to hide away Equipment on the main page. It
is also nice to have the '+' to get it quickly back when needed. However, this
seems not to work anymore (git c9d9d604803). Is this a feature or something went
|
|
10 Apr 2017, Stefan Ritt, Bug Report, Equipment Expand doesn't work anymore
|
> I'd liked very much the possibility to hide away Equipment on the main page. It
> is also nice to have the '+' to get it quickly back when needed. However, this
> seems not to work anymore (git c9d9d604803). Is this a feature or something went
|
|
10 Apr 2017, Andreas Suter, Bug Report, Equipment Expand doesn't work anymore
|
> > I'd liked very much the possibility to hide away Equipment on the main page. It
> > is also nice to have the '+' to get it quickly back when needed. However, this
> > seems not to work anymore (git c9d9d604803). Is this a feature or something went
|
|
15 Apr 2017, Konstantin Olchanski, Bug Report, Equipment Expand doesn't work anymore
|
> > > I'd liked very much the possibility to hide away Equipment on the main page. It
> > > is also nice to have the '+' to get it quickly back when needed. However, this
> > > seems not to work anymore (git c9d9d604803). Is this a feature or something went
|
|
05 Apr 2017, Andreas Suter, Suggestion, nicer header?!
|
We use the customHeader to display some useful information. Currently I do not
like its style. What about to make it more alike the footer?
|
|
05 Apr 2017, Stefan Ritt, Suggestion, nicer header?!
|
In my opinion this makes sense. If KO agrees, you should commit your change.
Stefan
|
|
15 Apr 2017, Konstantin Olchanski, Suggestion, nicer header?!
|
> In my opinion this makes sense. If KO agrees, you should commit your change.
Please go ahead (sorry for slow reply). I have no idea what this change does. A screenshot of "before"
|
|
14 Mar 2017, Andreas Suter, Bug Report, mhttpd - /Experiment/Menu Buttons - git-sha a350e8db11
|
I think there sneaked in a little bug in the mhttpd: when starting an experiment
from scratch and starting the mhttpd, the Menu Buttons are missing and,
correctly, I get periodic error messages. I expected that the default ODB entry
|
|
14 Mar 2017, Konstantin Olchanski, Bug Report, mhttpd - /Experiment/Menu Buttons - git-sha a350e8db11
|
> I think there sneaked in a little bug in the mhttpd: when starting an experiment
> from scratch and starting the mhttpd, the Menu Buttons are missing and,
> correctly, I get periodic error messages. I expected that the default ODB entry
|
|
16 Mar 2017, Konstantin Olchanski, Bug Report, Replaced with /experiment/menu, mhttpd - /Experiment/Menu Buttons - git-sha a350e8db11
|
> > I think there sneaked in a little bug in the mhttpd: when starting an experiment
> > from scratch and starting the mhttpd, the Menu Buttons are missing
|
|
16 Mar 2017, Thomas Lindner, Bug Report, Replaced with /experiment/menu, mhttpd - /Experiment/Menu Buttons - git-sha a350e8db11
|
> > > I think there sneaked in a little bug in the mhttpd: when starting an experiment
> > > from scratch and starting the mhttpd, the Menu Buttons are missing
>
|
|
28 Mar 2017, Konstantin Olchanski, Bug Report, Replaced with /experiment/menu, mhttpd - /Experiment/Menu Buttons - git-sha a350e8db11
|
> > > > I think there sneaked in a little bug in the mhttpd: when starting an experiment
> > > > from scratch and starting the mhttpd, the Menu Buttons are missing
> >
|
|
14 May 2015, Konstantin Olchanski, Suggestion, checksums for midas data files
|
I am adding LZ4 and LZO compression the mlogger and as part of this work, I would like to add
computation of checksums for the midas files.
|
|
14 May 2015, Stefan Ritt, Suggestion, checksums for midas data files
|
> Any thoughts on this?
We use binary midas files now for ~20 years and never felt the necessity to put any checksums or even encryption on these files. The reason for that is |
|
15 May 2015, Konstantin Olchanski, Suggestion, checksums for midas data files
|
> > Any thoughts on this?
>
> We use binary midas files now for ~20 years and never felt the necessity to put any checksums or even encryption on these files ...
|
|
05 Oct 2016, Lee Pool, Suggestion, checksums for midas data files
|
Hi
> On one side, such checksums help me confirm that uncompressed data contents is the same as original
|
|
13 Oct 2016, Konstantin Olchanski, Suggestion, checksums for midas data files
|
Confirmed, this is a bug in mlogger. It should be creating *2* files, one with the before-compression checksum and one with the after-compression checksum.
At
least both checksums are written to midas.log, so you can grep them from there. K.O.
|
|
13 Mar 2017, Konstantin Olchanski, Suggestion, checksums for midas data files
|
> Confirmed, this is a bug in mlogger. It should be creating *2* files, one with the before-compression checksum and one with the after-compression checksum.
At
> least both checksums are written to midas.log, so you can grep them from there. K.O.
|
|
13 Mar 2017, Konstantin Olchanski, Info, improved mhttpd sounds
|
I reworked the alarm sounds in mhttpd - now you can turn off all sounds without disabling the
alarm system for everybody.
|
|
27 Feb 2017, William Moore, Suggestion, analyzer failing to load ODB parameters
|
Hi,
I am attempting to compile and run analysis code on a completely different,
|