 23 Feb 2022, Stefan Ritt, Info, Midas slow control event generation switched to 32-bit banks
|
The midas slow control system class drivers automatically read their equipment and generate events containing midas banks. So far these have been 16-bit
banks using bk_init(). But now more and more experiments use large amount of channels, so the 16-bit address space is exceeded. Until last week, there
was even no check that this happens, leading to unpredictable crashes.
|
08 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue 
|
Hi all,
I am having some issues getting the ODBINC command to work within the MIDAS
|
 08 Feb 2022, Konstantin Olchanski, Bug Fix, ODBINC/Sequencer Issue
|
Please post the output of odbedit "ls -l" for /eq/ar.../variables. (you posted the
variable name as an image, and I cannot cut-and-paste the odb path!). BTW data size 4 is
correct, 4 bytes for INT32/UINT32/FLOAT. For DOUBLE it should be 8. For you it prints 32
|
|
09 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> Please post the output of odbedit "ls -l" for /eq/ar.../variables. (you posted the
> variable name as an image, and I cannot cut-and-paste the odb path!). BTW data size 4 is
> correct, 4 bytes for INT32/UINT32/FLOAT. For DOUBLE it should be 8. For you it prints 32
|
|
09 Feb 2022, Konstantin Olchanski, Bug Fix, ODBINC/Sequencer Issue
|
>
> [local:mu3eMSci:S]/>cd Equipment/ArduinoTestStation/Variables
> [local:mu3eMSci:S]Variables>ls -l
|
|
10 Feb 2022, Stefan Ritt, Bug Fix, ODBINC/Sequencer Issue
|
I tried following script:
ODBSET /Equipment/ArduinoTestStation/Variables/_S_, 10
|
|
14 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> I tried following script:
>
> ODBSET /Equipment/ArduinoTestStation/Variables/_S_, 10
|
|
14 Feb 2022, Stefan Ritt, Bug Fix, ODBINC/Sequencer Issue
|
Just post here a minimal script which produces the error, so that I can try myself.
... and make sure that you have the latest develop version of midas.
|
|
14 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> Just post here a minimal script which produces the error, so that I can try myself.
>
> ... and make sure that you have the latest develop version of midas.
|
|
14 Feb 2022, Stefan Ritt, Bug Fix, ODBINC/Sequencer Issue
|
> I noticed that "Jacob Thorne" in the forum had the same issue as us in Novemeber last
> year. Indeed we have not installed any later versions of MIDAS since then so we will
> double check we have the latest version.
|
|
14 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> > I noticed that "Jacob Thorne" in the forum had the same issue as us in Novemeber last
> > year. Indeed we have not installed any later versions of MIDAS since then so we will
> > double check we have the latest version.
|
|
15 Feb 2022, Stefan Ritt, Bug Fix, ODBINC/Sequencer Issue
|
> But the error still persists. Is there another way to update which we are missing?
The bug was definitively fixed in this modification:
|
|
16 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> > But the error still persists. Is there another way to update which we are missing?
>
> The bug was definitively fixed in this modification:
|
|
14 Feb 2022, jago aartsen, Bug Fix, ODBINC/Sequencer Issue
|
> >
> > [local:mu3eMSci:S]/>cd Equipment/ArduinoTestStation/Variables
> > [local:mu3eMSci:S]Variables>ls -l
|
|
02 Dec 2021, Alexey Kalinin, Bug Report, some frontend kicked by cm_periodic_tasks
|
Hello,
We have a small experiment with MIDAS based DAQ.
Status page shows :
|
|
26 Jan 2022, Konstantin Olchanski, Bug Report, some frontend kicked by cm_periodic_tasks
|
> The problem is that eventually some of frontend closed with message
> :19:22:31.834 2021/12/02 [rootana,INFO] Client 'Sample Frontend38' on buffer
> 'SYSMSG' removed by cm_periodic_tasks because process pid 9789 does not exist
|
|
11 Feb 2022, Alexey Kalinin, Bug Report, some frontend kicked by cm_periodic_tasks
|
Thanks for the answer.
As soon as I can(possible in a month) I'll try suggestion below:
|
|
28 May 2021, Joseph McKenna, Bug Report, History plots deceiving users into thinking data is still logging
|
I have been trying to fix this myself but my javascript isn't strong... The
'new' history plot render fills in missing data with the last ODB value
(even
when this value is very old...
elog:2180/1 shows this... The data logging stopped, but the history plot can
fool
users
into thinking data is logging (The export button generates CSVs with
entires every 10 seconds also). Grepping through the history files behind the
scenes, |
|
28 May 2021, Stefan Ritt, Bug Report, History plots deceiving users into thinking data is still logging
|
This is a known problem and I'm working on. See the discussion at:
https://bitbucket.org/tmidas/midas/issues/305/log_history_periodic-doesnt-account-for
Stefan |
|
02 Jun 2021, Konstantin Olchanski, Bug Report, History plots deceiving users into thinking data is still logging
|
https://bitbucket.org/tmidas/midas/issues/305/log_history_periodic-doesnt-account-for
this problem is a blocker for the next midas release.
|
|
10 Feb 2022, Stefan Ritt, Bug Report, History plots deceiving users into thinking data is still logging
|
The problem has been fixed on commit 825935dc on Oct. 2021 and runs fine since then at PSI. If TRIUMF people
agree, we can close that issue and proceed.
|
|
30 Sep 2021, Francesco Renga, Forum, OPC client within MIDAS
|
Dear all,
I need to integrate in my MIDAS project the communication with an OPC UA
server. My plan is to develop an OPC UA client as a "device" in
|
|
10 Feb 2022, Francesco Renga, Forum, OPC client within MIDAS
|
Dear all,
I finally succeeded to get a working driver for the communication with an OPC
UA server. It is based on the open62541 library and I use it in combination with the
|
|
07 Feb 2022, Konstantin Olchanski, Forum, MidasWiki moved from ladd00 to daq00.triumf.ca and updated to MediaWiki 1.35
|
MidasWiki moved from ladd00 (obsolete SL6) to daq00.triumf.ca (Ubuntu LTS 20.04)
and updated from obsolete MediaWiki LTS 1.27.7 to MediaWiki LTS 1.35, supported
until mid-2023, see https://www.mediawiki.org/wiki/Version_lifecycle
|
|
26 Jan 2022, Frederik Wauters, Forum, .gz files
|
I adapted our analyzer to compile against the manalyzer included in the midas repo.
All our data files are .mid.gz, which now fail to process :(
|
|
26 Jan 2022, Konstantin Olchanski, Forum, .gz files
|
> I adapted our analyzer to compile against the manalyzer included in the midas repo.
> TMReadEvent: error: short read 0 instead of -1193512213
|
|
31 Jan 2022, Frederik Wauters, Forum, .gz files
|
> > I adapted our analyzer to compile against the manalyzer included in the midas repo.
> > TMReadEvent: error: short read 0 instead of -1193512213
>
|
|
29 Jan 2022, Isaac Labrie Boulay, Forum, MIDAS and GRIF-16 digitizer (Standalone Mode).
|
Hi all,
I was sent a version of the frontend for the TIGRESS Detector lab setup so that
|
|
22 Oct 2021, Francesco Renga, Forum, mhttpd error
|
Dear all,
I am trying to make the MIDAS web server for my DAQ project accessible from other machines. In the ODB, I activated the necessary flags:
|
|
22 Oct 2021, Stefan Ritt, Forum, mhttpd error
|
> Enable IPv6 y
Probably the IPv6 problem, see here elog:2269
|
|
25 Oct 2021, Francesco Renga, Forum, mhttpd error
|
It worked, thank you very much!
Francesco
|
|
26 Jan 2022, Konstantin Olchanski, Forum, mhttpd error
|
> > Enable IPv6 y
>
> Probably the IPv6 problem, see here elog:2269
|
|
29 Oct 2021, Kushal Kapoor, Bug Report, Unknown Error 319 from client
|
I’m trying to run MIDAS using a frontend code/client named “fetiglab”. Run stops
after 2/3sec with an error saying “Unknown error 319 from client “fetiglab” on
localhost.
|
|
26 Jan 2022, Konstantin Olchanski, Bug Report, Unknown Error 319 from client
|
> I’m trying to run MIDAS using a frontend code/client named “fetiglab”. Run stops
> after 2/3sec with an error saying “Unknown error 319 from client “fetiglab” on
> localhost.
|
|
01 Dec 2021, Lars Martin, Bug Report, Off-by-one in sequencer documentation
|
The documentation for the sequencer loop says:
<quote>
|
|
02 Dec 2021, Stefan Ritt, Bug Report, Off-by-one in sequencer documentation
|
> The documentation for the sequencer loop says:
>
> <quote>
|
|
26 Jan 2022, Konstantin Olchanski, Bug Report, Off-by-one in sequencer documentation
|
> > 3 LOOP n,4
> > 4 MESSAGE $n,1
> > 5 ENDLOOP
|
|
26 Jan 2022, Stefan Ritt, Bug Report, Off-by-one in sequencer documentation
|
> Shades/ghosts of FORTRAN. c/c++/perl/python loops loop from 0 to n-1.
for (i=1 ; i<=10 ; i++); ;-) |
|
26 Jan 2022, Konstantin Olchanski, Bug Report, Off-by-one in sequencer documentation
|
> > Shades/ghosts of FORTRAN. c/c++/perl/python loops loop from 0 to n-1.
>
> for (i=1 ; i<=10 ; i++); ;-)
|
|
09 Nov 2021, Francesco Renga, Forum, Issue in data writing speed
|
Dear all,
I've a frontend writing a quite big bunch of data into a MIDAS bank (16bit output from a 4MP photo camera).
I'm experiencing a writing speed problem that I don't understand. When the photo camera is triggered at a low rate (< 2 Hz)
|
|
10 Nov 2021, Stefan Ritt, Forum, Issue in data writing speed
|
Midas uses various buffers (in the frontend, at the server side before the SYSTEM buffer, the SYSTEM buffer itself, on the
logger before writing to disk. All these buffers are in RAM and have fast access, so you can fill them pretty quickly. When
they are full, the logger writes to disk, which is slower. So I believe at 2 Hz your disk can keep up with your writing
|
|
26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed
|
Francesco, when you say "writing an event is slow", do you mean it in the frontend
or in the output data file?
|
|
26 Jan 2022, Konstantin Olchanski, Forum, Issue in data writing speed
|
> Francesco, when you say "writing an event is slow", do you mean it in the frontend
> or in the output data file?
|
|
09 Nov 2021, Hunter Lowe, Forum, MityCAMAC Login
|
Hello all,
I've recently acquired a MityCAMAC system that was built at TRIUMF and I'm
|
|
11 Nov 2021, Thomas Lindner, Forum, MityCAMAC Login
|
Hi Hunter
This sounds like a Triumf specific problem;
|
|
26 Jan 2022, Konstantin Olchanski, Info, MityCAMAC Login
|
For those curious about CAMAC controllers, this one was built around 2014 to
replace the aging CAMAC A1/A2 controllers (parallel and serial) in the TRIUMF
cyclotron controls system (around 50 CAMAC crates). It implements the main
|
|
16 Dec 2021, Zaher Salman, Forum, Device driver for modbus
|
| Dear all, does anyone have an example of for a device driver using modbus or modbus tcp to communicate with a device and willing to share it? Thanks. |
|
26 Jan 2022, Konstantin Olchanski, Forum, Device driver for modbus
|
> Dear all, does anyone have an example of for a device driver using modbus or modbus tcp to communicate with a device and willing to share it? Thanks.
I have not seen any modbus devices recently, so all my code and examples are quite old.
|
|
19 Nov 2021, Jacob Thorne, Forum, Sequencer error with ODB Inc
|
Hi,
I am having problems with the midas sequencer, here is my code:
|
|
02 Dec 2021, Stefan Ritt, Forum, Sequencer error with ODB Inc
|
Thanks for reporting that bug. Indeed there was a problem in the sequencer code which I fixed now. Please try the updated develop branch.
Stefan |
|
29 Oct 2021, Frederik Wauters, Bug Report, midas::odb::iterator + operator
|
I have 16 array odb key
{"FIR Energy", {
|
|
29 Oct 2021, Frederik Wauters, Bug Report, midas::odb::iterator + operator | work around
|
ok, so retrieving as a std::array (as it was defined) does not work
std::array<uint32_t,16> avalues = settings["FIR Energy"]["Energy Gap Value"];
|
|
25 Oct 2021, Francesco Renga, Forum, Logger crash
|
Hello,
I'm experiencing crashes of the mlogger program on the time scale of a couple
of days. The only messages from MIDAS are:
|
|
25 Oct 2021, Stefan Ritt, Forum, Logger crash
|
The short term solution would be to increase the logger timeout in the ODB under
/Programs/Logger/Watchdog timeout
|
|
14 Oct 2021, Amy Roberts, Suggestion, Adding (or improving discoverability) of TID for odbset
|
Creating an ODB key requires users to know the Type ID that are defined in
https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.
|
|
15 Oct 2021, Stefan Ritt, Suggestion, Adding (or improving discoverability) of TID for odbset
|
> Creating an ODB key requires users to know the Type ID that are defined in
> https://bitbucket.org/tmidas/midas/src/develop/include/midas.h starting at line 320.
>
|
|
11 Oct 2021, Konstantin Olchanski, Forum, midas forum updated, moved
|
The midas forum software (elogd) was updated to latest version and moved from our old server
(ladd00.triumf.ca) to our new server (daq00.triumf.ca).
|
|
11 Oct 2021, Konstantin Olchanski, Forum, test
|
| test, no email. K.O. |
|
11 Oct 2021, Konstantin Olchanski, Forum, test
|
> test, no email. K.O.
test reply, no email. K.O. |
|
11 Oct 2021, Konstantin Olchanski, Forum, test
|
> > test, no email. K.O.
>
> test reply, no email. K.O.
|
|
11 Oct 2021, Konstantin Olchanski, Forum, test
|
> > > test, no email. K.O.
> >
> > test reply, no email. K.O.
|