 27 Sep 2012, Randolf Pohl, Bug Fix, [PATCH] mana.c compile fix, gz files 
|
Hi,
I had to apply the attached patch to convince SuSE Linux 12.2 to compile mana.c
|
 09 Oct 2012, Stefan Ritt, Bug Fix, [PATCH] mana.c compile fix, gz files
|
> Hi,
>
> I had to apply the attached patch to convince SuSE Linux 12.2 to compile mana.c
|
|
16 Aug 2012, Cheng-Ju Lin, Bug Report, launching roody kills the analyzer
|
Hi All,
I've installed midas (Rev:5294) on SLC6.3 (64bit), along with recent trunk versions of rootana and roody.
|
|
16 Aug 2012, Cheng-Ju Lin, Bug Fix, launching roody kills the analyzer
|
OK, I've found the solution in the roody forum. The solution for 64bit machine is to replace
uint32_t p =0;
with
|
|
17 Aug 2012, Konstantin Olchanski, Bug Report, launching roody kills the analyzer
|
> I've installed midas (Rev:5294) on SLC6.3 (64bit), along with recent trunk versions of rootana and roody.
>
> #6 root_server_thread (arg=ox7f54fc001150) at src/mana.c:5154
|
|
17 Aug 2012, Cheng-Ju Lin, Bug Report, launching roody kills the analyzer
|
Hi Konstantin,
Many thanks for your feedback. I was able to keep the analyzer from exiting when launching roody by making some changes in the roody code.
|
|
26 Sep 2012, Konstantin Olchanski, Bug Report, launching roody kills the analyzer
|
> >
> > I guess you can also debug the old midas server code inside mana.c...
> >
|
|
10 Sep 2012, Shaun Mead, Info, MIDAS button to display image
|
Hi,
I've written a python script that reads some data from a file and generates a
|
|
11 Sep 2012, Stefan Ritt, Info, MIDAS button to display image
|
> Hi,
>
> I've written a python script that reads some data from a file and generates a
|
|
06 Sep 2012, shaun, Bug Report, "cannot find recent history file"
|
Hi, when attempting to access a history window the following message is repeated
over and over in the MIDAS message log:
|
|
05 Sep 2012, Stefan Ritt, Info, New pipe compression implemented in mlogger
|
A new pipe compression has been implemented in mlogger thanks to Fedor Ignatov from BINP
Novosibirsk. The way it works that the logger write into a pipe instead directly into a file. The pipe can
then be connected to any compression program without the need to copile against any additional C
|
|
10 May 2011, Jianglai Liu, Forum, simple example frontend for V1720
|
Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 May 2011, Stefan Ritt, Forum, simple example frontend for V1720
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 May 2011, Pierre-Andre Amaudruz, Forum, simple example frontend for V1720
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
24 May 2011, Jianglai Liu, Forum, simple example frontend for V1720
|
Thanks all for the kind help. This did point me to the right direction. I was now able to make v1720.c as well as my MIDAS frontend (thanks to
Jimmy's example) talking to V1720, and read out the waveform bank.
|
|
18 May 2011, Jimmy Ngai, Forum, simple example frontend for V1720
|
[quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 Aug 2012, Carl Blaksley, Forum, simple example frontend for V1720
|
[quote="Jimmy Ngai"][quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
12 Aug 2012, Jimmy Ngai, Forum, simple example frontend for V1720
|
[quote="Carl Blaksley"][quote="Jimmy Ngai"][quote="Jianglai Liu"]Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
|
|
10 Aug 2012, Carl Blaksley, Forum, Problem with CAMAC controlled by CES8210 and read out by CAEN V1718 VME controller
|
Hello all,
I am trying to put together a system to read out several camac adc. The camac is
|
|
27 Jul 2012, Cheng-Ju Lin, Info, MIDAS under Scientific Linux 6
|
Hi All,
I was wondering if anyone has attempted to install MIDAS under Scientific Linux 6? I am planning to install
|
|
31 Jul 2012, Pierre-Andre Amaudruz, Info, MIDAS under Scientific Linux 6
|
Hi Cheng-Ju,
Midas will install and run under SL6. We're presently running SL6.2.
|
|
04 Jul 2012, Konstantin Olchanski, Bug Report, Crash after recursive use of rpc_execute()
|
I am looking at a MIDAS kaboom when running out of space on the data disk - everything was freezing
up, even the VME frontend crashed sometimes.
|
|
04 Jul 2012, Konstantin Olchanski, Bug Report, Crash after recursive use of rpc_execute()
|
> ... I see a recursive call to rpc_execute(): rpc_execute() calls tr_stop() calls cm_yield() calls
> ss_suspend() calls rpc_execute()
> ... rpc_execute() cannot be called recursively - it is not re-entrant as it uses a global buffer
|
|
13 Jul 2012, Stefan Ritt, Bug Report, Crash after recursive use of rpc_execute()
|
> Then I realized that I see a recursive call to rpc_execute(): rpc_execute() calls tr_stop() calls cm_yield() calls
> ss_suspend() calls rpc_execute(). The second rpc_execute successfully completes, but leave corrupted
> data for the original rpc_execute(), which happily crashes. At the moment of the crash, recursive call to
|
|
20 Jun 2012, Konstantin Olchanski, Info, lazylogger write to HADOOP HDFS
|
I tried using the lazylogger "Disk" method to write into a HADOOP HDFS clustered filesystem and found a
number of problems. I ended up replacing the lazylogger lazy_copy() function that still uses former YBOS
code with a new lazy_disk_copy() function that uses generic fread/fwrite. Also fixed the situation where
|
|
29 Jun 2012, Konstantin Olchanski, Info, lazylogger write to HADOOP HDFS
|
> Anyhow, the new lazylogger writes into HDFS just fine and I expect that it would also work for writing into
> DCACHE using PNFS (if ever we get the SL6 PNFS working with our DCACHE servers).
>
|
|
20 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
I am recording here the results from a test VME system using two VF48 waveform digitizers and a 64-bit
dual-core VME processor (V7865). VF48 data suppression is off, VF48 modules set to read 48 channels,
1000 ADC samples each. mlogger data compression is enabled (gzip -1).
|
|
20 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> I am recording here the results from a test VME system using two VF48 waveform digitizers
Note 1: data compression is about 89% (hence "data to disk" rate is much smaller than the "data from VME" rate)
|
|
24 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> > I am recording here the results from a test VME system using two VF48 waveform digitizers
(I now have 4 VF48 waveform digitizers, so the event rates are half of those reported before. Date rate
|
|
25 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
> P.S. Observe the ever present unexplained event rate fluctuations between 130-140 event/sec.
An important aspect of optimizing your system is to keep the network traffic under control. I use GBit Ethernet between FE and BE, and make sure the switch |
|
25 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> > P.S. Observe the ever present unexplained event rate fluctuations between 130-140 event/sec.
>
> An important aspect of optimizing your system is to keep the network traffic under control. I use GBit Ethernet between FE and BE, and make sure the |
|
26 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> > > I am recording here the results from a test VME system using four VF48 waveform digitizers
Now we look at the detail of the event readout, or if you want, the real-time properties of the MIDAS
|
|
26 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> > > > I am recording here the results from a test VME system using four VF48
waveform digitizers
|
|
21 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
Just for completeness: Attached is the VME transfer speed I get with the SIS3100/SIS1100 interface using
2eVME transfer. This curve can be explained exactly with an overhead of 125 us per DMA transfer and a
continuous link speed of 83 MB/sec. |
|
21 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> Just for completeness: Attached is the VME transfer speed I get with the SIS3100/SIS1100 interface using
> 2eVME transfer. This curve can be explained exactly with an overhead of 125 us per DMA transfer and a
> continuous link speed of 83 MB/sec.
|
|
22 Jun 2012, Stefan Ritt, Info, midas vme benchmarks
|
> > Just for completeness: Attached is the VME transfer speed I get with the SIS3100/SIS1100 interface using
> > 2eVME transfer. This curve can be explained exactly with an overhead of 125 us per DMA transfer and a
> > continuous link speed of 83 MB/sec.
|
|
24 Jun 2012, Konstantin Olchanski, Info, midas vme benchmarks
|
> > > Just for completeness: Attached is the VME transfer speed I get with the SIS3100/SIS1100 interface using
> > > 2eVME transfer. This curve can be explained exactly with an overhead of 125 us per DMA transfer and a
> > > continuous link speed of 83 MB/sec.
|
|
22 Jun 2012, Zisis Papandreou, Info, adding 2nd ADC and TDC to crate
|
Hi folks:
we've been running midas-1.9.5 for a few years here at Regina. We are now
|
|
13 Jun 2012, Exaos Lee, Bug Report, Cannot start/stop run through mhttpd
|
Revision: r5286
Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
Problem:
|
|
13 Jun 2012, Konstantin Olchanski, Bug Report, Cannot start/stop run through mhttpd
|
> Revision: r5286
> Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
> Problem:
|
|
13 Jun 2012, Exaos Lee, Bug Report, Cannot start/stop run through mhttpd
|
> Well, it's mhttpd who cannot start the run, not you. So what happens when you press
> the "start run" button? Any errors in midas.log or in midas messages? Is mtransition
> in your PATH?
|
|
14 Jun 2012, Exaos Lee, Bug Report, Cannot start/stop run through mhttpd
|
> > Revision: r5286
> > Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
> > Problem:
|
|
14 Jun 2012, Stefan Ritt, Bug Report, Cannot start/stop run through mhttpd
|
> I found the problem only appears when I run mhttpd in scripts, whether bash or python.
> And I'm quite sure that the MIDAS environments (e.g. PATH, MIDAS_EXPTAB, MIDASSYS, etc.)
> are set in such scripts. If I start mhttpd in an xterm with or without "-D", it works
|
|
14 Jun 2012, Konstantin Olchanski, Bug Report, Cannot start/stop run through mhttpd
|
> > I found the problem only appears when I run mhttpd in scripts, whether bash or python.
> > And I'm quite sure that the MIDAS environments (e.g. PATH, MIDAS_EXPTAB, MIDASSYS, etc.)
> > are set in such scripts. If I start mhttpd in an xterm with or without "-D", it works
|
|
21 Jun 2012, Stefan Ritt, Bug Report, Cannot start/stop run through mhttpd
|
> I agree. Somehow mhttpd cannot run mtransition. I am not super happy with this dependance on user $PATH settings and the inability to capture error messages
> from attempts to start mtransition. I am now thinking in the direction of running mtransition code by forking. But remember that mlogger and the event |
|
14 Jun 2012, Konstantin Olchanski, Bug Report, Cannot start/stop run through mhttpd
|
> > > Revision: r5286
> > > Platform: Debian Linux 6.0.5 AMD64, with packages from squeeze-backports
>
|
|
09 Jun 2012, Greg Christian, Bug Report, _net_send_buffer realloc
|
In midas.c, I noticed that memory is only allocated to the global buffer
_net_send_buffer by calling realloc() from within the function
resize_net_send_buffer() (at least this was the only place I could find
|
|
10 Jun 2012, Konstantin Olchanski, Bug Report, _net_send_buffer realloc
|
> In midas.c, ...
>
> 1) _net_send_buffer is not set to NULL when declared.
|
|
10 Jun 2012, Greg Christian, Bug Report, _net_send_buffer realloc
|
> > In midas.c, ...
> >
> > 1) _net_send_buffer is not set to NULL when declared.
|
|
11 Jun 2012, Konstantin Olchanski, Bug Report, _net_send_buffer realloc
|
> > > In midas.c, ...
> > >
> > > 1) _net_send_buffer is not set to NULL when declared.
|
|
15 Jun 2012, Konstantin Olchanski, Bug Report, _net_send_buffer realloc
|
> 2) cm_disconect_experiment() calls free(_net_send_buffer) but does not set its
> value to NULL.
|
|
12 Dec 2011, Michael Murray, Bug Report, bk_delete uses memcpy instead of memmove
|
In midas.c, the bk_delete function removes a bank by decrementing the total
event size and then copying the remaining banks into the location of the first
using memcpy from string.h.
|
|
16 Dec 2011, Konstantin Olchanski, Bug Report, bk_delete uses memcpy instead of memmove
|
> In midas.c, the bk_delete function removes a bank by decrementing the total
> event size and then copying the remaining banks into the location of the first
> using memcpy from string.h.
|
|
19 Dec 2011, Stefan Ritt, Bug Report, bk_delete uses memcpy instead of memmove
|
> > In midas.c, the bk_delete function removes a bank by decrementing the total
> > event size and then copying the remaining banks into the location of the first
> > using memcpy from string.h.
|
|
15 Jun 2012, Konstantin Olchanski, Bug Report, bk_delete uses memcpy instead of memmove
|
> In midas.c, the bk_delete function removes a bank by decrementing the total
> event size and then copying the remaining banks into the location of the first
> using memcpy from string.h.
|
|
13 Jun 2012, Konstantin Olchanski, Forum, ladd00.triumf.ca https ssl certificate update
|
The HTTPS SSL certificate on ladd00.triumf.ca has been updated. Same as the old
certificate, the new one is self-signed and your web browser may complain about
that and ask you to "save a security exception".
|
|
18 Apr 2012, Exaos Lee, Bug Report, Build error with mlogger: invalid conversion from ‘void*’ to ‘gzFile’
|
I tried to build MIDAS under ArchLinux, failed on errors as following:
[CODE]src/mlogger.cxx: In function ‘INT midas_flush_buffer(LOG_CHN*)’:
src/mlogger.cxx:1011:54: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
|
|
19 Apr 2012, Stefan Ritt, Bug Report, Build error with mlogger: invalid conversion from ‘void*’ to ‘gzFile’
|
[quote="Exaos Lee"]I tried to build MIDAS under ArchLinux, failed on errors as following:
[CODE]src/mlogger.cxx: In function ‘INT midas_flush_buffer(LOG_CHN*)’:
src/mlogger.cxx:1011:54: error: invalid conversion from ‘void*’ to ‘gzFile’ [-fpermissive]
|
|
25 Apr 2012, Konstantin Olchanski, Bug Report, Build error with mlogger: invalid conversion from ‘void*’ to ‘gzFile’
|
Stefan's fix is incomplete - the "gzFile" cast is needed for all calls to zlib, not just those that some version
of GCC happens to complain about. Fixed.
svn rev 5286.
|
|
27 Apr 2012, Stefan Ritt, Bug Report, Build error with mlogger: invalid conversion from ‘void*’ to ‘gzFile’
|
[quote="KO]BTW, I read the midas elog via email and if you post html or elcode messages, I receive complete
gibberish. For prompt service, please select message type "plain". (yes, you cannot use fancy colours and
blinking text, but better than me not reading your stuff at all).
|
|
29 Feb 2012, Konstantin Olchanski, Bug Report, Problem with semaphores
|
Hi there! In the T2K/ND280 experiment in Japan, we keep having problems with MIDAS locking (probably
of ODB). The symptoms are: some program reports a timeout waiting for the ODB lock, then all programs
eventually die with this same error. Complete system meltdown. This does not look like the deadlock
|
|
01 Mar 2012, Stefan Ritt, Bug Report, Problem with semaphores
|
> Anyhow, if anybody can suggest such an advanced locking library it would be great. Will save me the
> effort of writing one.
|
|
30 Jan 2012, Stefan Ritt, Info, IEEE Real Time 2012 Call for Abstracts
|
Hello,
I'm co-organizing the upcoming Real Time Conference, which covers also the field of data acquisition, so it might be interesting for people working
|
|
05 Sep 2011, John McMillan, Forum, khyt1331 under scientific linux 5.5?
|
Hello,
I'm trying to build khyt1331 under scientific linux 5.5, kernel
2.6.18-238.9.1el5. Has anyone succeeded with this. So far, I've
|