 06 Sep 2009, Exaos Lee, Bug Report, Compiling error of "src/history_odbc.cxx" 
|
Version svn-r4556, I got a compiling error as below:
[CODE]
|
 06 Sep 2009, Exaos Lee, Bug Report, Compiling error of "src/history_odbc.cxx"
|
[quote="Exaos Lee"]Version svn-r4556, I got a compiling error as below:
The detail error log is attached. I used my CMake script without any optimization flags. I will try the default Makefile again.[/quote]
|
|
06 Sep 2009, Exaos Lee, Bug Fix, Maybe a fix
|
Changing "SQLINTEGER" to "SQLLEN" maybe let the compiling pass. See the attached diff.
But I failed in another error. It was the problem in CMakeLists.txt. (FIXED) |
|
03 Sep 2009, Exaos Lee, Bug Report, Prompt problem about odbedit
|
I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
Please see the attachment. |
|
03 Sep 2009, Stefan Ritt, Bug Report, Prompt problem about odbedit
|
> I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
> problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
> Please see the attachment.
|
|
21 Aug 2009, Exaos Lee, Forum, Link error of "mcnaf"
|
The "utils/mcnaf.c" uses "camop()",
[code]
180: printf("camop\n");
|
|
21 Aug 2009, Konstantin Olchanski, Forum, Link error of "mcnaf"
|
> If you compile each source into an object, you may encounter a link error ...
Also camac rpc did not work at all last time we tried to use it at triumf, maybe 4 month ago in the Dragon
|
|
31 Aug 2009, Exaos Lee, Forum, Link error of "mcnaf"
|
I repeated the link error again. I also found the almost all sources located in "driver/camac/" using "cam_op()" but not "camop()". Please see the grep
result below:
[CODE]
|
|
31 Aug 2009, Exaos Lee, Forum, Why should we use "INLINE" here?
|
| There are many "INLINE" definitions in "include/*.h". Both GNU C and C99 permit using inline functions. I still wonder why. :-) |
|
03 Sep 2009, Stefan Ritt, Forum, Why should we use "INLINE" here?
|
[quote="Exaos Lee"]There are many "INLINE" definitions in "include/*.h". Both GNU C and C99 permit using inline functions. I still wonder why. :-)[/quote]
The INLINE statements are a relict from times where a subroutine call was in the order of a few microseconds. This was when you probably were pretty young, |
|
01 Sep 2009, Jimmy Ngai, Forum, Timeout during run transition
|
Dear All,
I'm using SL5 and MIDAS rev 4528. Occasionally, when I stop a run in odbedit,
|
|
03 Sep 2009, Stefan Ritt, Forum, Timeout during run transition
|
> Dear All,
>
> I'm using SL5 and MIDAS rev 4528. Occasionally, when I stop a run in odbedit,
|
|
29 Aug 2009, Exaos Lee, Forum, At last, I'm here again!
|
I always got a 503 server error while I tried to connect this log book the latest
weeks. I don't know why. I hope it is not due to the network censorship because
of the coming National Day of China. Anyway, good luck to me when I want to paste
|
|
10 Aug 2009, Konstantin Olchanski, Info, misc changes from PIENU and T2K
|
FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC
tests:
|
|
10 Aug 2009, Konstantin Olchanski, Info, misc changes from PIENU and T2K
|
> FYI - committed the last changes from TRIUMF DAQ systems for PIENU and T2K/ND280 FGD and TPC
> tests:
> svn rev 4541
|
|
04 Aug 2009, Exaos Lee, Forum, VME-related codes contribution
|
Hi, all
I have some codes while using MIDAS. I upload them here. They are tested with
|
|
04 Aug 2009, Exaos Lee, Forum, About python interface
|
Coding in Python is faster than in C (but running slower). So, some python interfaces are useful for testing purpose. I hope you may like the PyMVME module
for VME bus testing. |
|
04 Aug 2009, Exaos Lee, Forum, The contents of the attachment
|
As requested from K.O., I paste the "00README.txt" as the following:
[CODE]
#-*- mode: outline -*-
|
|
04 Aug 2009, Exaos Lee, Forum, Scripts to handle MIDAS sessions
|
Hi, all again
I have some scripts in "bash" and "Python" to handle MIDAS sessions. Please see the attached [url=elog:613/1]utils4midas.zip[/url]. I didn't write instructions |
|
03 Aug 2009, Exaos Lee, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Stefan Ritt, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
[quote="Exaos Lee"]The definition of mvme_read_value is as the following:
[CODE]unsigned int EXPRT mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
|
|
03 Aug 2009, Konstantin Olchanski, Forum, How to distinguish the status and value returned from "mvme_read_value(...)"
|
> uint32_t mvme_read_value(MVME_INTERFACE * vme, mvme_addr_t vme_addr);
> Question: How to distinguish the status and value returned?
|
|
02 Jul 2009, Dawei Liu, Forum, Data taking hangs in the middle of run
|
Hi,
We are using midas to read ADC. It sometimes hung in the middle of data taking.
|
|
03 Jul 2009, Pierre-Andre Amaudruz, Forum, Data taking hangs in the middle of run
|
Hi Dawei,
Could you give more info on your setup:
|
|
06 Jul 2009, Dawei Liu, Forum, Data taking hangs in the middle of run
|
Hi Pierr-Andre,
|
|
08 Jul 2009, Konstantin Olchanski, Forum, jorway73a.c, Data taking hangs in the middle of run
|
> > Could you give more info on your setup:
> > - CAMAC controller model
> Jorway 73A, we have three in hand and the problem doesn't depend on which controller
|
|
18 Jul 2009, Exaos Lee, Forum, jorway73a.c, Data taking hangs in the middle of run
|
> > > Could you give more info on your setup:
> > > - CAMAC controller model
> > Jorway 73A, we have three in hand and the problem doesn't depend on which controller
|
|
07 May 2009, Konstantin Olchanski, Info, mhttpd now uses mtransition
|
mhttpd function for starting and stopping runs now uses cm_transition(DETACH) which spawns an
external helper program called mtransition to handle the transition sequencing. This helps with the old
problem of looking at a blank screen for a long time if some frontends take a long time to process run
|
|
21 May 2009, Konstantin Olchanski, Info, mhttpd now uses mtransition
|
> mhttpd function for starting and stopping runs now uses cm_transition(DETACH) which spawns an
> external helper program called mtransition to handle the transition sequencing.
>
|
|
02 Jun 2009, Konstantin Olchanski, Info, mhttpd now uses mtransition
|
> > mhttpd function for starting and stopping runs now uses cm_transition(DETACH) which spawns an
> > external helper program called mtransition to handle the transition sequencing.
>
|
|
26 Jun 2009, Konstantin Olchanski, Info, mhttpd now uses mtransition
|
> > > mhttpd function for starting and stopping runs now uses cm_transition(DETACH) which spawns an
> > > external helper program called mtransition to handle the transition sequencing.
|
|
07 May 2009, Konstantin Olchanski, Bug Report, mlogger duplicate event problem
|
We have seen on several daq systems this problem: we start a run and observe that the number of
events written by mlogger to the output file is double the number of events actually collected. Upon
inspection of the output file, we see that every event is written twice. Restarting the run usually fixes
|
|
02 Jun 2009, Konstantin Olchanski, Bug Report, mlogger duplicate event problem
|
> We have seen on several daq systems this problem: we start a run and observe that the number of
> events written by mlogger to the output file is double the number of events actually collected. Upon
> inspection of the output file, we see that every event is written twice. Restarting the run usually fixes
|
|
16 Jun 2009, Konstantin Olchanski, Bug Report, mlogger duplicate event problem
|
> > We have seen on several daq systems this problem: we start a run and observe that the number of
> > events written by mlogger to the output file is double the number of events actually collected. Upon
> > inspection of the output file, we see that every event is written twice. Restarting the run usually fixes
|
|
24 Jun 2009, Konstantin Olchanski, Bug Report, TR_STARTABORT transition, mlogger duplicate event problem
|
> > > We have seen on several daq systems this problem: we start a run and observe that the number of
> > > events written by mlogger to the output file is double the number of events actually collected. Upon
> > > inspection of the output file, we see that every event is written twice. Restarting the run usually fixes
|
|
25 Jun 2009, Stefan Ritt, Bug Report, TR_STARTABORT transition, mlogger duplicate event problem
|
> Stefan suggested implementing a new transition, TR_STARTABORT, issued if TR_START fails. mlogger can use it to cleanup open files, etc, similar to TR_STOP.
>
> This is now implemented. In mlogger, TR_STARTABORT is similar to TR_STOP, but deletes open output files and does not save end-of-run information into |
|
25 Jun 2009, Konstantin Olchanski, Bug Report, TR_STARTABORT transition, mlogger duplicate event problem
|
> > Stefan suggested implementing a new transition, TR_STARTABORT, issued if TR_START fails. mlogger can use it to cleanup open files, etc, similar to TR_STOP.
> >
> > This is now implemented. In mlogger, TR_STARTABORT is similar to TR_STOP, but deletes open output files and does not save end-of-run information into |
|
25 Jun 2009, Stefan Ritt, Bug Report, TR_STARTABORT transition, mlogger duplicate event problem
|
> Are you sure? Only clients that register themselves to receive the TR_STARTABORT transition (via cm_register_transition()) will receive this transition.
>
> As of now, the only client that registers and receives this transition is mlogger.
|
|
24 Jun 2009, Razvan Stefan Gornea, Forum, Frontend and manual trigger question
|
Hi,
I have a question related to the frontend and I would need some suggestions
|
|
25 Jun 2009, Stefan Ritt, Forum, Frontend and manual trigger question
|
> I would like to add manual trigger capability and so I added the EQ_MANUAL_TRIG
> flag to the "CAEN" equipment type but the problem is that the framework calls
> directly the readout function on "Midas manual trigger". To trigger manually the
|
|
04 Jun 2009, bazinski, Bug Report, mhttpd command line experiment specifying
|
Hi
Not sure how the rest of you specify mhttpd to work with multiple experiments on
|
|
05 Jun 2009, Stefan Ritt, Bug Report, mhttpd command line experiment specifying
|
> Not sure how the rest of you specify mhttpd to work with multiple experiments on
> one machine, but it would seem not the same as me ;-)
|
|
05 Jun 2009, bazinski, Bug Report, mhttpd command line experiment specifying
|
Hi
> > Not sure how the rest of you specify mhttpd to work with multiple experiments on
|
|
05 Jun 2009, Konstantin Olchanski, Bug Report, mhttpd command line experiment specifying
|
> I guess you have to do some debugging there. Note that "detached" transitions have
> been implemented recently by Konstantin, so maybe your problem is related to that.
> In this case Konstantin should check what's wrong.
|
|
18 Jun 2009, Konstantin Olchanski, Bug Report, mhttpd command line experiment specifying
|
> > I guess you have to do some debugging there. Note that "detached" transitions have
> > been implemented recently by Konstantin, so maybe your problem is related to that.
> > In this case Konstantin should check what's wrong.
|
|
15 Jun 2009, Jimmy Ngai, Forum, Time limit of each run
|
Dear All,
Can one set a time limit for each run? I can only find event limit in ODB.
|
|
07 May 2009, Konstantin Olchanski, Bug Report, odbedit bad ctrl-C
|
When using "/bin/bash" shell, if I exit odbedit (and other midas programs) using ctrl-C, the terminal
enters a funny state, "echo" is turned off (I cannot see what I type), "delete" key does not work (echoes
^H instead).
|
|
04 Jun 2009, Stefan Ritt, Bug Report, odbedit bad ctrl-C
|
> When using "/bin/bash" shell, if I exit odbedit (and other midas programs) using ctrl-C, the terminal
> enters a funny state, "echo" is turned off (I cannot see what I type), "delete" key does not work (echoes
> ^H instead).
|
|
03 Jun 2009, Konstantin Olchanski, Bug Fix, Fix db_open_record() error return
|
The odb hot-link function db_open_record() did not return an error when the system limit for hotlinks is
exceeded and no more hot links could be added (silent failure). This is now fixed.
odb.c svn rev 4500
|
|
18 May 2009, Exaos Lee, Suggestion, Question about using mvmestd.h
|
The "mvmestd.h" uses the following function to open a VME device:
[CODE]int mvme_open(MVME_INTERFACE **vme, int idx)[/CODE]
I found that the "driver/vme/sis3100/sis3100.c" uses the implementation as:
|
|
18 May 2009, Stefan Ritt, Suggestion, Question about using mvmestd.h
|
[quote="Exaos Lee"]The "mvmestd.h" uses the following function to open a VME device:
[CODE]int mvme_open(MVME_INTERFACE **vme, int idx)[/CODE]
I found that the "driver/vme/sis3100/sis3100.c" uses the implementation as:
|
|
19 May 2009, Konstantin Olchanski, Suggestion, Question about using mvmestd.h
|
> The problem is: I renamed my SIS1100 devices as /dev/sis1100/xxxxx. So I have to hack the
"sis3100.c".
|
|
20 May 2009, Exaos Lee, Suggestion, Question about using mvmestd.h
|
> > The problem is: I renamed my SIS1100 devices as /dev/sis1100/xxxxx. So I have to hack the
> "sis3100.c".
>
|
|
07 May 2009, Konstantin Olchanski, Info, midas misc timeout fixes
|
(catching up on recent changes from t2k and pienu)
Various timeout problems fixed:
|
|
15 May 2009, Konstantin Olchanski, Info, midas misc timeout fixes
|
> - cm_transition() timeouts now settable from ODB (/experiment/transition timeout, transition connect timeout). Rev 4479
transition connect timeout was actually only half of that specified because of an error in computing timeout arguments to the select() system
|
|
15 May 2009, Konstantin Olchanski, Info, midas misc timeout fixes
|
> - cm_transition() timeouts now settable from ODB (/experiment/transition timeout, transition connect timeout). Rev 4479
transition connect timeout was actually only half of that specified because of an error in computing timeout arguments to the select() system
|
|
07 May 2009, Konstantin Olchanski, Bug Fix, Fixed mlogger run start and stop
|
Fixed problems with mlogger starting and stopping runs.
Basic difficulty was with the mlogger using ASYNC transitions, which did not implement proper
|